• 대한안전경영과학회지
• /
• 제25권2호
• /
• pp.107-111
• /
• 2023

This study aims to empirically investigate effects of motion repetition and external load according to joint motion on discomfort through an experiment. Eighteen college students (female: 9; male: 9) participated in an experiment measuring perceived discomfort using the Borg CR10. Joint(wrist, elbow, shoulder and trunk) motion, its repetition and external load were adopted as independent variables. The results showed that all three independent variables were statistically significant on discomfort. Participants' sex also significantly affected discomfort obtained in the experiment. While the interactions of joint motion and repetition, and joint motion and external load were not significant at α = 0.05, that of motion repetition and external load was significant. Based on the experimental results, four regression equations by the joints involved were presented, which could be used as a tool for evaluating postural loads by the joints. It may be postulated that based on the results of this study, scoring systems of RULA and REBA, and those of OWAS and REBA underestimates effects of motion repetition and external load, respectively. It is expected that the results of this study will be used as a basic data for developing an observational method properly reflecting the effects of motion repetition and external load.

• 한국안전학회지
• /
• 제19권4호
• /
• pp.123-128
• /
• 2004

This study investigated effect of arm posture, repetition of wrist motion and external load on perceived discomfort. The arm postures were controlled by shoulder flexion, elbow flexion, and ist motions such as flexion, extension, radial deviation and ulnar deviation. An experiment was conducted to measure discomfort scores for experimental treatments using the magnitude estimation, in which the L16 orthogonal array was adopted for reducing the size of experiment. The results showed that while the effect of the shoulder flexion, repetition of wrist motion and external load was statistically significant at $\alpha=0.05$or 0.10, that of the elbow and wrist motions was not. Discomfor ratings increased linearly as levels of wrist repetition and external load increased. This implies that the existing posture classification schemes such as OWAS, RULA, which do not properly consider effect of motion repetition and external load, may underestimate postural load. Based on the regression equation for wrist repetition and external load, isocomfort region indicating the region within which discomfort scores were expected to be the same was proposed. It is recommended that when assessing risk of postures or developing new posture classification schemes, motion repetition and external load as well as posture itself be fully taken into consideration for precisely evaluating postural stress.

• 한국실천공학교육학회논문지
• /
• 제4권2호
• /
• pp.46-52
• /
• 2012

본 연구에서는 이미 운동역학 단원을 수강한 중학교 1학년에서 3학년까지의 학생을 대상으로 연구하였다. 학생들을 대상으로 반복 학습 전과 후의 동형검사를 이용해 테스트 한 결과 반복학습이 효과적이며, 학습전보다 과학에 대한 관심도가 더 높은 것으로 나타났다. 연구에 참여한 세 집단이 동일한 개념을 학습했으나 개념 형성 시기가 다른 점을 고려해 연계적으로 반복 심화 학습하는 것이 좀 더 높은 학습 효과를 얻을 수 있는 것으로 나타났다.

• 한국안전학회지
• /
• 제21권3호
• /
• pp.122-126
• /
• 2006

This study investigated effect of arm posture, wrist motion repetition and external load on perceived discomfort through an experiment. Eleven female college students participated in the experiment, where shoulder, elbow and wrist motion, wrist motion repetition, and external load were used as independent variables. The results showed that only external load had a significant effect on perceived discomfort. The perceived discomfort linearly increased with external load. Based on the results of this and the previous study for males, it was concluded that effect of external load on perceived discomfort was larger than that of other posture and motion repetition related variables. This implies that effect of external load is the most important factor considered in the first place when assessing postural load.

• 대한인간공학회지
• /
• 제26권1호
• /
• pp.39-46
• /
• 2007

The purpose of this study was to develop a comprehensive posture classification scheme considering the effects of external load and motion repetition as well as those of working posture. The scheme was developed based on a series of existing empirical studies dealing with postural classification scheme, effects of external load and motion repetition. Ranges of joint motions, external load and motion repetition were divided into the groups with the same degree of discomforts. Each group was assigned a numerical relative discomfort score of code on the basis of discomfort values for the neutral position of elbow flexion. The criteria for evaluating stress of working postures were proposed based on the four distinct action categories, in order to enable practitioners to apply appropriate corrective actions. The proposed scheme was compared with OWAS, RULA and REBA. The comparison revealed that while the proposed scheme and RULA showed similar results for the working postures with light external load and non-repetitive postures, the former overestimated postural load for postures with moderate or heavy external load and repetitive postures than the latter.

• 한국군사과학기술학회지
• /
• 제13권3호
• /
• pp.453-460
• /
• 2010

For high quality image acquisition, compensating air-vehicle motion is essential for airborne SAR system. This paper describes a timing control based motion compensation method for airborne SAR system. Efficient timing control is critical for SAR system since it maintains many timing signals and timing setting for the signals should be updated frequently. This paper proposes Timing Cluster method as an efficient means for timing control of SAR system. Moreover, this paper suggests a simple and efficient method to compensate air-vehicle motion based on the Timing Cluster method. Timing Cluster method enables SAR system to control the timing in a timing noncritical way just maintaining little amount of information.

• 대한인간공학회지
• /
• 제18권2호
• /
• pp.103-120
• /
• 1999

The purpose of this study was to evaluate the manual workload in repetitive wrist and finger motion. To evaluate manual workload, angular displacement of the joint, EMG of the muscle and subjective rating were studied. Both wrist motion and finger motion were studied. A screw-driving task was used for the wrist motion experiment. A keyboard typing task was used for the finger motion experiment. All finger joint angles and wrist angles were measured by an angle-measuring glove($CyberGlove^{TM}$, Virtual Technologies, Inc.). Surface EMG was recorded from FCU muscle and FDS muscle simultaneously with the angle measurement. Subjective ratings of exertion were also recorded using the modified Borg's CR-10 scale. Repetition rates of 0.5, 1, 2 motions per second were used with each task. As a result, manual workload increased with increasing repetitiveness. Peak spectral magnitude and frequency components corresponded closely with joint angular displacement amplitudes and repetition rates. Results of the correlation analysis showed that there were significant correlation among EMG, frequency-weighted motion and subjective measurement. Both EMG and frequency-weighted filtering showed consistent workload estimation with increasing task frequency. Subjective ratings showed slight over-estimation of the workload as the task frequency is increased.

• 대한음성학회지:말소리
• /
• 제58호
• /
• pp.1-18
• /
• 2006

The purpose of this study was to investigate diadochokinetic (DDK) characteristics in the subjects with spastic cerebral palsy (CP) by severity. DDK characteristics were measured through rate, regularity, accuracy and consistency in Alternate Motion rate (AMR) and Sequential Motion rate (SMR) tasks. The subjects participated in this study included 27 subjects with spastic CP (mild- 9, moderate- 9, severe- 9) and 9 normal persons who are around 11-20 years old. On the result of this study, rate in AMR was significant difference between all spastic groups and normal group, and rate in SMR was significant difference between normal and mild groups and moderate and severe groups. In regularity of the DDK tasks, severe group had significant difference the other groups. Finally, accuracy and consistency of the DDK tasks exhibited significant difference between all spastic groups and normal group. In conclusion, the subjects with spastic CP have a tendency to produce slow and irregular syllable repetition as severity increases, but to produce inaccurate and inconsistent syllable repetition regardless of severity in the DDK tasks.

• PNF and Movement
• /
• 제7권4호
• /
• pp.1-7
• /
• 2009

Purpose : This paper reviews on the method of PNF stretching. Methods : This is literature study with Pubmed, medline, SPORT Discus, EBSCO, ProQuest and books. Results : PNF stretching is effective for increasing range of motion than static and ballistic stretching. CR(contract-relax) technique is effective and CRAC(contract-relax with agonist contraction) technique including agonist contraction is more effective. A minimum of one repetition, twice or three times per week is required for range of motion gains, needs to be conducted continueously. A minimum of 20% contraction intensity and more than 3 seconds contraction duration are needed to increase range of motion. Inclusion of static stretching of antagonist and agonist contraction is more effective. Conclusions : PNF stretching is more effective for increasing range of motion than other stretching methods, but, clinicians need to select proper techniques according to subjects and muscles, and conduct carefully when applying technique.

• 산업공학
• /
• 제17권2호
• /
• pp.218-225
• /
• 2004

This study aims to investigate effect of external load and motion repetitiveness on perceived discomfort. An experiment was performed for measuring discomfort scores at varying conditions, in which external load, motion repetitiveness and arm posture were employed as experimental variables. The arm posture was controlled by shoulder flexion and abduction, and by elbow flexion. Fifteen healthy college-age students without history of musculoskeletal disorders voluntarily participated in the experiment. The results showed that the effect of external load, motion repetitiveness and shoulder posture on discomfort were statistically significant, but that elbow posture did not significantly affect discomfort ratings. The effect of external load was much larger than that of any other variables, and that of repetitiveness was second only to external load. Discomfort scores significantly increased linearly as the levels of external load and motion repetitiveness increased. This implies that although they were not fully reflected in the existing posture classification scheme such as OWAS, RULA, etc., the effect of external load and motion repetitiveness should be taken into consideration for precisely quantifying work load in industry. Based on regression analysis, equivalent values of external load and motion repetitiveness in terms of discomfort scores were provided, which would be useful for better understanding the degree of their effect on work load.