• Journal of Biosystems Engineering
• /
• 제38권2호
• /
• pp.138-148
• /
• 2013

Purpose: Determining an appropriate path is a top priority in order for a robot to maneuver in a dynamically efficient way especially in a pick-and-place task. In a non-standardized work environment, current robot arm executes its motion based on the kinematic displacements of joint variables, though resulting motion is not dynamically optimal. In this research we suggest analyzing and applying motion patterns of the human arm as an alternative to perform near optimum motion trajectory for arbitrary pick-and-place tasks. Methods: Since the motion of a human arm is very complicated and diverse, it was simplified into two links: one from the shoulder to the elbow, and the other from the elbow to the hand. Motion patterns were then divided into horizontal and vertical components and further analyzed using kinematic and dynamic methods. The kinematic analysis was performed based on the D-H parameters and the dynamic analysis was carried out to calculate various parameters such as velocity, acceleration, torque, and energy using the Newton-Euler equation of motion and Lagrange's equation. In an attempt to assess the efficacy of the analyzed human motion pattern it was compared to the virtual motion pattern created by the joint interpolation method. Results: To demonstrate the efficacy of the human arm motion mechanical and dynamical analyses were performed, followed by the comparison with the virtual robot motion path that was created by the joint interpolation method. Consequently, the human arm was observed to be in motion while the elbow was bent. In return this contributed to the increase of the manipulability and decrease of gravity and torque being exerted on the elbow. In addition, the energy required for the motion decreased. Such phenomenon was more apparent under vertical motion than horizontal motion patterns, and in shorter paths than in longer ones. Thus, one can minimize the abrasion of joints by lowering the stress applied to the bones, muscles, and joints. From the perspectives of energy and durability, the robot arm will be able to utilize its motor most effectively by adopting the motion pattern of human arm. Conclusions: By applying the motion pattern of human arm to the robot arm motion, increase in efficiency and durability is expected, which will eventually produce robots capable of moving in an energy-efficient manner.

• 공업화학
• /
• 제22권6호
• /
• pp.642-647
• /
• 2011

회전형 휘발성 산화장치(voloxidizer)와 200 g $U_3O_8$ 분말을 사용하여 초기 미세 입자층의 운동형태, 열처리 온도 및 시간, voloxidizer의 회전속도에 따른 다공성 그래뉼의 회수율과 특성을 분석하였다. 초기 미세 입자층의 운동형태에 따른 1 mm 이상의 그래뉼의 회수율은 rolling 운동 때보다 slumping 운동일 경우에 보다 높았다. 초기 미세 입자층이 rolling 운동형태인 경우에는 미세입자로부터 그래뉼이 생성됨에 따라서 slumping 운동형태로 변하며 slumping 빈도가 매우 높았다. 열처리 온도의 증가 및 10 h까지는 시간의 증가에 따라서 그래뉼의 회수율이 매우 크게 증가하였다. Slumping 운동형태를 보이는 초기 미세 입자층의 경우에 voloxidizer의 회전속도가 증가함에 따라서 그래뉼의 회수율 은 81.5에서 88.7%로 증가하였으나, 그래뉼 특성 측면에서 보면 회전속도가 2 rpm인 경우에 밀도, 파쇄강도, 구형도가 가장 높았다.

• 한국인공지능학회지
• /
• 제4권1호
• /
• pp.1-3
• /
• 2016

These days, citizens are interested in the energy. IT technology needs to develop and to make use of energy effectively and to save energy. In this study, motion recognition LED lamp was used to have good energy efficiency and to be made of environment friendly material. The purpose of development of the lamp was to add motion recognition to LED lamp. In this study, infrared ray sensor's distance measurement was used to develop LED lamp. Most of the lamps were used under dark environment, so that infrared ray sensor was used to perceive movement under dark environment. And, LED lamp with good efficiency and less power consumption was used to increase efficiency. Citizens were interested in perception of the movement to distinguish from conventional type of the lamps.

• 동의생리병리학회지
• /
• 제18권6호
• /
• pp.1598-1601
• /
• 2004

I studied on the dual principle the negative-positive toward 'the motion of Taijiquan'. The results are as follows. The grade of comprehension on the dual principle for the negative-positive for human-body is equal to the comprehension on Taijiquan. YeoBiSae is judged abstractly for the image of MuGeug and GiSae for the image of TaeGeug on the motion of Taijiquan progressing program. The motion of Taijiquan is divided up the extension and contraction. In the motion of Taijiquan, the extension exercises make use of positive energy and DogMaeg(독맥), the contraction exercises make use of negative energy and ImMaeg(임맥).

• 태양에너지
• /
• 제18권4호
• /
• pp.77-86
• /
• 1998

This study presents a so-called regenerative ER damper which does not require external power sources with aid of energy conversion from kinetic energy into electrical energy. The ER damper is manufactured by employing a rack and pinion mechanism which converts a linear piston motion to a rotary motion. This rotary motion is amplified by gears and subsequently activates a generator to produce an electrical energy. In order to demonstrate the efficiency of the mechanism, with respect to the frequency of the ER damper is investigated a generated electric voltage, which is amplified via a transformer prior to being applied to the ER damper. In addition, the damping force of the ER damper obtained by the regenerated voltage is evaluated.

• 한국운동역학회지
• /
• 제16권4호
• /
• pp.61-71
• /
• 2006

The purpose of this study was to compare kinematic characteristics on the limbs at 3 different walking speed during the energy and the normal walking. Eight subjects performed energy walking and normal walking at the slow speed(65 beats/min), the normal speed(115beats/min), the fast speed(160 beats/min). The 3-d angle was calculated by vector projected with least squares solution with three-dimensional cinematography(Motion Analysis corporation). The range of motion was calculated on the trunk, shoulder, elbow, hip, knee joint. The results showed that stride length was no difference of the two walking pattern. The duration of support phase was also no difference of the two walking pattern. The range of motion of shoulder joint significantly increased in the sagittal and frontal planes, and the range of motion of elbow joint significantly increased as the energy walking. The range of motion of hip joint had no significant difference in the any planes in changing of walking speed. But the most remarkable difference of the two walking patterns revealed at the trunk. The range of flexion/extension angle had significant increasing $2.36^{\circ}$ at normal speed, and the range of the right/left flexion angle had significant increasing below $4^{\circ}$ at the 3 walking speed, and The range of rotation angle had significant increasing $7.35^{\circ}$, $9.22^{\circ}$, respectively at the normal and slow speed. But there was no significant difference of range of motion at the hip and knee joints between energy walking and normal walking.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권3호
• /
• pp.239-245
• /
• 2017

As a new technical approach, wave energy converter by using vertical motion of water in the multiple water chambers were developed to realize actual wave power generation as eco-environmental renewable energy. And practical use of wave energy converter was actually to require the following conditions: (1) setting up of the relevant device and its application to wave power generation in case that severe wave loading is avoided; (2) workability in installation and maintenance operations; (3) high energy conversion potential; and (4) low cost. In this system, neither the wall(s) of the chambers nor the energy conversion device(s) are exposed to the impulsive load due to water wave. Also since this system is profitable when set along the jetty or along a long floating body, installation and maintenance are done without difficulty and the cost is reduced. In this paper, we describe the system which consists of a float, a shaft connected with another shaft, a rack and pinion arrangement, a ratchet mechanism, and rotary type generator(s). Then, we present the dynamics model for evaluating the output electric power, and the results of numerical calculation including the effect of the phase shift of up/down motion of the water in the array of water chambers aligned along the direction of wave propagation.

• Structural Engineering and Mechanics
• /
• 제54권4호
• /
• pp.809-827
• /
• 2015

In this paper, seismic energy response of inelastic steel structures under earthquake excitations is investigated. For this purpose, a numerical procedure based on nonlinear dynamic analysis is developed by considering material, geometric and connection nonlinearities. Material nonlinearity is modeled by the inversion of Ramberg-Osgood equation. Nonlinearity caused by the interaction between the axial force and bending moment is also defined considering stability functions, while the geometric nonlinearity caused by axial forces is described using geometric stiffness matrix. Cyclic behaviour of steel connections is taken into account by employing independent hardening model. Dynamic equation of motion is solved by Newmark's constant acceleration method in the time history domain. Energy response analysis of space frames is performed by using this proposed numerical method. Finally, for the first time, the distribution of the different energy types versus time at the duration of the earthquake ground motion is obtained where in addition error analysis for the numerical solutions is carried out and plotted depending on the relative error calculated as a function of energy balance versus time.

• Earthquakes and Structures
• /
• 제9권6호
• /
• pp.1133-1152
• /
• 2015

A frequency-domain method is developed for evaluating the earthquake input energy to two building structures connected by viscous dampers. It is shown that the earthquake input energies to respective building structures and viscous connecting dampers can be defined as works done by the boundary forces between the subsystems on their corresponding displacements. It is demonstrated that the proposed energy transfer function is very useful for clear understanding of dependence of energy consumption ratios in respective buildings and connecting viscous dampers on their properties. It can be shown that the area of the energy transfer function for the total system is constant regardless of natural period and damping ratio because the constant Fourier amplitude of the input acceleration, relating directly the area of the energy transfer function to the input energy, indicates the Dirac delta function and only an initial velocity (kinetic energy) is given in this case. Owing to the constant area property of the energy transfer functions, the total input energy to the overall system including both buildings and connecting viscous dampers is approximately constant regardless of the quantity of connecting viscous dampers. This property leads to an advantageous feature that, if the energy consumption in the connecting viscous dampers increases, the input energies to the buildings can be reduced drastically. For the worst case analysis, critical excitation problems with respect to the impulse interval for double impulse (simplification of pulse-type impulsive ground motion) and multiple impulses (simplification of long-duration ground motion) are considered and their solutions are provided.

• 한국멀티미디어학회논문지
• /
• 제10권1호
• /
• pp.139-146
• /
• 2007

Wireless Sensor network를 이용하여 객체를 추적하는 방법에 대해 많은 연구가 진행되어 왔다. 본 연구는 객체 추적에 사용되는 방법에 따라 에너지의 양과 추적의 정확도 사이에 존재하는 상관관계를 관찰하고, 움직임 예측 방법에서 에너지 소비량을 최소화할 수 있음을 확인하였다. 추적에 사용되는 에너지는 센서노드가 객체를 감지하기 위해 소모하는 것이며, 추적의 정확도는 객체의 실제위치와 감지에 의해 계산된 위치의 차이이다. 몇 가지 추적방법과 파라미터의 조절에 따라 추적의 정확도와 소비되는 에너지의 양에 차이가 있고, 움직임 예측 알고리즘을 사용할 때 가장 좋은 에너지 효율을 얻을 수 있었다. 또한 가속도를 고려한 움직임 예측 알고리즘의 개선을 통해 더 나은 정확도와 에너지 효율을 기록하였다. 시뮬레이션 결과 움직임 예측 알고리즘에서 목표의 미래위치에 따라 노드를 활성화시키는 범위는 예측 알고리즘이 정확할 경우 센서 노드의 감지범위 정도로 제한하는 것이 유리함을 알 수 있었다.