• 드라이브 ㆍ 컨트롤
• /
• 제16권4호
• /
• pp.9-15
• /
• 2019

Bucket trajectory is crucial regarding precision work with an excavator. In general, the bucket trajectory deviation is determined by the machining deviation of the frame, driving deviation of the driving hydraulic cylinder, clearance in the joints, and deformation of the structure. This paper investigated the relationship between the respective clearance in joints and the trajectory deviation of the bucket at the finishing work of the ditching for a 20-ton excavator. As a result, the larger the clearance, the larger deviation is increased at trajectory. However, it was found that the deviation of the rotation angle and displacement of the bucket was limited and the size of clearance does not affect closely on the contact angle of the pin shaft.

• 한국지구과학회지
• /
• 제40권5호
• /
• pp.476-486
• /
• 2019

This study examines the controlling role of synoptic disturbances on $PM_{10}$ spring variability in the Korean Peninsula by using empirical orthogonal function (EOF) and back trajectory analyses. Three leading EOF modes are identified, and a lead-lag analysis suggests that $PM_{10}$ variabilities be closely related to the synoptic weather systems. The first EOF shows the spatially homogeneous distribution of $PM_{10}$, which is influenced by travelling anticyclonic disturbance with negative precipitation and descending motion. The second and third modes exhibit the dipole structures of $PM_{10}$, being associated with propagating cyclones. Furthermore, the back-trajectory analysis suggests that the transport of pollutants by anomalous winds associated with synoptic disturbances also contribute to the altered $PM_{10}$ concentration. Hence, a substantial synoptic control should be considered in order to fully understand the $PM_{10}$ spatiotemporal variability.

• 대한기계학회논문집A
• /
• 제38권6호
• /
• pp.585-592
• /
• 2014

본 논문에서는 도마뱀 로봇 설계를 위한 생체운동 모사 다물체 동역학 시뮬레이터가 개발되었다. 시뮬레이터에 사용된 다물체-기구 동역학 모델은 상용 소프트웨어인 RecurDyn 에 쿠반에놀 도마뱀의 모션 캡쳐 데이터와 Micro-CT 데이터를 적용하여 생성되었다. 다양한 도마뱀의 보행 운동 특성 해석을 위해서 생체운동 시뮬레이터는 궤적 생성모듈, 역기구학 모듈, 역동역학 모듈로 구성된다. 궤적생성 모듈은 도마뱀의 속도에 따른 척추운동과 발 궤적을 생성한다. 또한, 도마뱀 로봇 설계를 위해서 역기구학을 통한 관절 각도 계산과 그를 통한 역동역학 해석으로 이동속도에 대한 요구 조인트 구동력을 생성한다.

• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.133-140
• /
• 1993

In this paper, we prpose a method for tracking optimally a spatial trajectory of the end-effector of flexible robot arms with multiple joints. The proposed method finds joint trajectories and joint torques necessary to produce the desired end-effector motion of flexible manipulator. In inverse kinematics, optimized joint trajectories are computed from elastic equations. In inverse dynamics, joint torques are obtained from the joint euqations by using the optimized joint trajectories. The equations of motion using finite element method and virtual work principle are employed. Optimal control is applied to optimize joint trajectories which are computed in inverse kinematics. The simulation result of a flexible planar manipulator is presented.

• 로봇학회논문지
• /
• 제6권3호
• /
• pp.263-273
• /
• 2011

This paper analyzes the motion of a horseback riding robot which has two actuators and three joints. It is impossible to control the saddle to get to any position and orientation using the two motors because the robot has less degrees of freedom than the number of joints. Therefore it is required to know the possible location and orientation along with the velocity characteristics of each pose prior to motion planning. For this purpose, this paper analyzes the characteristics of the robot motion. The authors derive the forward and inverse kinematics of the robot motion and developed the trajectory editor for motion planning. Also, Jacobian of the robot is analyzed. It reveals that one of the actuator has little influence to the speed of the saddle motion while the other affects the speed of the saddle motion dominantly. The approach of the paper can be applied for the analysis of characteristics of a robot which has less number of actuators than that of joints.

• 한국해양공학회지
• /
• 제25권4호
• /
• pp.7-11
• /
• 2011

The installation phase for a topside module suggested can be divided into 9 stages, which include start, pre-lifting, lifting, lifted, rotating, positioning, lowering, mating, and end of installation. The transfer of the topside module from a transport barge to a crane vessel takes place in the first three stages, from start to lifting, while the transfer of the module onto a floating spar hull occurs in the last three stages, from lowering to the end. The coupled multi-body motions are calculated in both calm water and in irregular waves with significant wave height (1.52m), with suggested force equilibrium diagrams. The effects of the hydrodynamic interactions between the crane vessel and barge during the lifting stage have been considered. The internal forces caused by the load transfer and ballasting are derived for the lifting phases. The results of these internal forces for the calm water condition are compared with those in the irregular sea condition. Although the effect of pitch motion on the relative vertical motion between the deck of the floating structure and the topside module is significant in the lifting phases, the internal force induced pitch motion is too small to show its influence. However, the effect of the internal force on the wave-induced heave responses in the lifting phases is noticeable in the irregular sea condition because the transfer mass-induced draught changes in the floating structure are observed to have higher amplitudes than the external force induced responses.

• 대한인간공학회지
• /
• 제16권3호
• /
• pp.71-75
• /
• 1997

This paper presents the development of videobased 3-dimensional tracking system. Measurement of human motion is important in the application of ertonomics. The system uses advanced direct video measurement technology. Passive retro-reflecting markers are attached to a subject and movements of markers are observed by two CCD cameras. Infrared light emitted near the CCD cameras is reflected by the markers and is detected by the cameras. The images are captured by Samsung MVB302 board and the centers of markers are calculated by DSP program. The positions of markers are transferred from MVB02 board to the computer through AT bus. The computer then tracks the position of each marker and saves the data. This system has dynamic accuracy with 0.7% average error and 4.2% maximum error, and the sampling rate to 6 .approx. 10 Hz, and this system can analyse the trajectory and speed of the marker. The results of this study can be used for operator's motion analysis, task analysis, and hand movement characteristic analysis.

• 한국정보기술학회 영문논문지
• /
• 제9권2호
• /
• pp.65-74
• /
• 2019

In this paper, we describe a new swing analysis system. We design this system to provide various information about golf swings and to help to correct wrong swings. We visualize three-dimensional skeletal information obtained from Kinect through various views. Golfers can see their swing behavior through these views. This system can calculate the similarity between the two trajectories obtained from Kinect to determine the similarity of swing trajectories of different golfers. Input trajectories are resampled to have equal spacing and are performed scaling and translation for accurate trajectory comparison. We have verified the usefulness of the proposed system through various analyzes.

• 한국운동역학회지
• /
• 제23권4호
• /
• pp.295-306
• /
• 2013

The purpose of this study was to provide high school male shot putters training methods of gliding and delivery motion through comparative analysis of kinematic characteristics. To accomplish this purpose, three dimensional motion analysis was performed for the subjects(PKC, KKH, YDL) who participated in high school male shot putter competition on 92nd (2011), 93rd (2013) National Sports Festival. The subjects were filmed by four Sony HXR-MC2000 video cameras with 60 fields/s. The three-dimensional kinematic data of the glide, conversion and delivery phase were obtained by Kwon3d 3.1 version. The data of the shoulder rotational angles and projection angles were calculated with Matlab R2009a. The following conclusions had been made. With the analysis of the gliding and stance length ratio, the gliding length was shorter at the TG than the SG with short-long technique but the gliding and stance length ratio was 46.8:53.2% respectively. The deviation of the shots trajectory from APSS(Athlete-plus-shot-system) revealed that the PKC showed similar to "n-a-b-c-I" of skilled S-shape type, KKH and YDL showed "n-a-d-f-I'" of unskilled type. Furthermore, they showed smaller radial distance from the central axis of the APSS and the shots were away from the linear trajectory. From this characteristics, The PKC who performed more TG than SG had shorter glide with S-shape of APSS(skilled type) showed the better record than others with technical skill. But KKH and YDL had bigger glide ratio with "n-a-d-f-I'" of unskilled type and improved their records with technical factor. The projection factor had an effect on the record directly. Because PKC maintained more lower glide and transition posture with momentum transfer through COG's rapid horizontal velocity respectively the subject possessed the characteristics of high horizontal and vertical velocity with large turning radius from shot putter to APSS.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.254-259
• /
• 1992

In this paper, we propose an optimal method for the tracking a trajectory of the end-effector of flexible robot arms with multiple joints. The proposed method finds joint trajectories and joint torques necessary to produce the desired end-effector motion of flexible manipulator. In inverse kinematics, optimized joint trajectories are computed from elastic equations. In inverse dynamics, joint torques are obtained from the joint equations by using the optimized joint trajectories. The equations of motion using finite element method and virtual work principle are employed. Optimal control is applied to optimize joint trajectories which are computed in inverse kinematics. The simulation of flexible planner manipulator is presented.