• Title/Summary/Keyword: Mortar strength

Search Result 1,627, Processing Time 0.023 seconds

The Analysis of Early Age Properties of Hydration Heat and Autogenous Shrinkage according to Specimen Size and Retardation of Hydration (시험체 크기 및 수화지연 효과에 따른 초기재령 수화발열 및 자기수축 특성 분석)

  • Kim, Gyu-Yong;Koo, Kyung-Mo;Lee, Hyoung-Jun;Lee, Eui-Bae
    • Journal of the Korea Concrete Institute
    • /
    • v.21 no.4
    • /
    • pp.481-488
    • /
    • 2009
  • It has been reported that the magnitude and the development rate of autogenous shrinkage of cement paste, mortar and concrete were affected by history and magnitude of inner temperature at an early age. But it was not enough to explain the relation between hydration heat and autogenous shrinkage at an early age, because there was no certain analysis on histories of hydration heat and autogenous shrinkage in previous studies. In our prior study, to understand the relationship between hydration heat and autogenous shrinkage of concrete at an early age, the analysis method for histories of hydration heat and autogenous shrinkage was suggested. Based on this method, early age properties of hydration heat and autogenous shrinkage of high strength concrete with different sizes and hydration retardation were investigated in this study. As a result of the study, properties of hydration temperature and autogenous shrinkage were different according to specimen size and hydration retardation. However, there was a close relationship between hydration temperature and autogenous shrinkage at an early age, especially between HHV and ASV as linear slopes of the sections where hydration temperature and autogenous shrinkage increase rapidly; the higher HHV, the higher ASV and the greater ultimate autogenous shrinkage. And it was found that, among the setting time, bend point and temperature increasing point, they were close relationship each other on cement hydration process.

Microstructure and Properties of Mortar Containing Synthetic Resin using Image Analysis (이미지 분석을 활용한 합성수지 혼입 모르타르의 특성 및 미세구조 분석)

  • Lee, Binna;Min, Jiyoung;Lee, Jong-Suk;Lee, Jang-Hwa
    • Journal of the Korea Concrete Institute
    • /
    • v.28 no.1
    • /
    • pp.59-65
    • /
    • 2016
  • Commercial synthetic resins with great amount of hydrogen atoms were investigated for neutron shielding aggregates. Total three types of resins were considered in this study: high density polyethylene (HDPE), polypropylene (PP), and ultra molecular weight polyethylene (UPE). When these resins replaced 20, 40, 60 vol% of fine aggregates, mechanical properties were first evaluated including compressive and tensile strengths, and then image/microstructure analyses such as cross-section analysis, SEM, and X-ray CT were performed. The results showed that the compressive and tensile strengths decreased with the increase of replacement ratio of HDPE and PP, which was found through image analysis that it was closely related to the distribution of resins at the failure surface of test specimens. The strength reduction of UPE was quite small compared to HDPE and PP but it abruptly increased when the replacement level exceeded 60 vol%. The results of microstructure analyses indicated that the replacement level significantly affected the amount of air void so that it is critical to determine the reasonable amount of UPE to make cementitous materials for neutron shielding.

Properties of Polymer-Modified Mortars Using Methylmethacrylate-Butyl Acrylate Latexes with Various Monomer Ratios (모노머비를 변화한 MMA/BA 합성 라텍스 혼입 폴리머 시멘트 모르타르의 성질)

  • Hyung, Won-Gil;Kim, Wan-Ki;Choi, Nak-Woon;Soh, Yang-Seob
    • Journal of the Korea Concrete Institute
    • /
    • v.15 no.2
    • /
    • pp.273-279
    • /
    • 2003
  • The purpose of this study is to clarify the effect of the monomer ratio on properties of the polymer-modified mortars using methylmethacrylate-butyl acrylate(MMA/BA) latexes, and to obtain basic data necessary to develop appropriate latexes for cement modifiers. From the test results, we knew that the pore volume of polymer-modified mortars using MMA/BA latexes at bound MMA contents of 60 and 70 percent is 7.5∼75nm and the fine pore volume is increased with an increase in the polymer-cement ratio. The total pore volume of polymer-modified mortars using MMA/BA latexes is linearly reduced with an increase in the bound MMA content and increased in the polymer-cement ratio. In general, the superior compressive strength of polymer-modified mortars using MMA/BA latexes is obtained at a bound MMA content of 70 percent and a polymer-cement ratio of 15%. And, the water absorption and chloride ion penetration depth are greatly affected by the polymer-cement ratio rather than the bound MMA content. The important factors affecting the properties of polymer-modified mortars using MMA/BA latexes polymerized with various monomer ratios are the variations of the pore size distribution with changing bound MMA content and the polymer-cement ratio.

Synthesis of Surface Crosslinked Poly(sodium acrylate) for Delayed Absorption in Cement Solution (시멘트 수용액에서 흡수 지연을 위한 Crosslinked Poly(sodium acrylate)의 표면 가교)

  • Hwang, Ki-Seob;Jang, Seok-Soo;Jung, Yong-Wook;Lee, Seung-Han;Ha, Ki-Ryong
    • Polymer(Korea)
    • /
    • v.35 no.4
    • /
    • pp.363-369
    • /
    • 2011
  • To study the effect of incorporation of a surface crosslinking layer on a crosslinked poly (sodium acrylate) (cPSA) absorbent with ethylene glycol dimethacrylate CEGDMA), we synthesized several surface crosslinked cPSAs with EGDMA by an inverse emulsion polymerization method to delay the absorption of excess water in concrete, Liquid paraffin was used as a continuous phase. cPSA was synthesized with acrylic acid (AA) neutralized with aqueous 8 M sodium hydroxide solution as a monomer, N,N-methylene bisacrylamide (MBA) as crosslinking agent and ammonium persulfate (APS) and sodium metabisulfite (SMBS) as a redox initiator system by inverse emulsion polymerization. FTIR spectroscopy was used to characterize $Ca^{2+}$ ion interaction with cPSA and cPSA-EGDMAs. The swelling ratios of synthesized absorbents were evaluated from the absorption in deionized water, cement saturated aqueous solution and aqueous solution of calcium hydroxide (pH 12). Equilibrium swelling times for cPSA and surface crosslinked cPSA with EGDMA were 2 and 3 hrs, respectively. We also observed an increase in setting time of the cement and an increase in the compressive strength of mortar by addition of the synthesized cPSA-EGDMA.

Experimental Study on the Manufacturing and Waterproofing Properties of Self-healing Concrete Waterproofing Agent Using Microcapsules (마이크로캡슐을 활용한 자기치유 구체방수제의 제조 및 방수특성에 관한 실험적 연구)

  • Yun-Wang Choi;Jae-Heun Lee;Neung-Won Yang
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.11 no.4
    • /
    • pp.289-298
    • /
    • 2023
  • In this study, the development of a self-healing concrete waterproofing agent was examined, focusing on its manufacturing and waterproofing properties. The optimal ratio using microcapsules for the concrete waterproofing agent was determined through assessments of flow, compressive strength, and permeability conducted during the mortar stage. These findings aimed to provide fundamental data for evaluating the self-healing properties of the concrete waterproofing agent designed for use in concrete structures. The self-healing concrete waterproofing agent was comprised of three types of inorganic materials commonly used for repair purposes. From experimental results, a composition ratio with a high potassium silicate content, referred to as SIM-2, was found suitable. A surfactant mixing ratio of 0.03 % was identified to enhance the dispersibility of the concrete waterproofing agent, while a mixing ratio of 0.2 % distilled water was deemed suitable for viscosity adjustment. For the magnetic self-healing concrete waterproofing agent's healing agent, using microcapsules in the range of 0.5 % to 0.7 % met the KS F 4949 and KS F 4926 standards.

A Study on the Reinforcement Effect of Low Flow Mortal Injection Method Using Field Test (현장시험을 이용한 저유동성 몰탈주입공법의 보강효과에 관한 연구)

  • Junyeong Jang;Gwangnam Lee;Daehyeon Kim
    • The Journal of Engineering Geology
    • /
    • v.33 no.4
    • /
    • pp.599-609
    • /
    • 2023
  • In the seismic retrofitting of harbor breakwaters in Korea, the recovery rate is often uncertain due to site conditions and site conditions, and problems continue to arise. Therefore, in this study, we analyzed the recovery rate and compressive strength of the improved material through drilling survey by grouting confirmation method after applying low-fluidity mortar injection method, and furthermore, we checked the elastic modulus by downhole test and tomography to confirm the reinforcement effect of soft ground after ground improvement. The experimental results showed that the average shear wave velocity of the ground increased from 229 m/s to 288 m/s in BH-1 and BH-3 boreholes to a depth of 28.0 m, and the average shear wave velocity of the ground to a depth of 30.0 m tended to increase from 224 m/s to 282 m/s in the downhole test. This is believed to be a result of the increased stiffness of the ground after reinforcement. The results of the tomographic survey showed that the Vs of the soft ground of the sample at Site 1 increased from 113 m/s to 214 m/s, and the Vs of the sample at Site 2 increased from 120 m/s to 224 m/s. This shows that the stiffness of the ground after seismic reinforcement is reinforced with hard soil, as the Vs value satisfies 180 m/s to 360 m/s in the classification of rock quality according to shear wave velocity.

Assessing the Damage: An Exploratory Examination of Electronic Word of Mouth (손해평고(损害评估): 대전자구비행소적탐색성고찰(对电子口碑行销的探索性考察))

  • Funches, Venessa Martin;Foxx, William;Park, Eun-Joo;Kim, Eun-Young
    • Journal of Global Scholars of Marketing Science
    • /
    • v.20 no.2
    • /
    • pp.188-198
    • /
    • 2010
  • This study attempts to examine the influence that negative WOM (NWOM) has in an online context. It specifically focuses on the impact of the service failure description and the perceived intention of the communication provider on consumer evaluations of firm competence, attitude toward the firm, positive word of mouth and behavioral intentions. Studies of communication persuasiveness focus on "who says what; to whom; in which channel; with what effect (Chiu 2007)." In this research study, we examine electronic web posting, particularly focusing on two aspects of "what": the level of service failure communicated and perceived intention of the individual posting. It stands to reason electronic NWOM that appears to be trying to damage a product’s or firm's reputation will be viewed as more biased and will thus be considered as less credible. According to attribution theory, people search for the causes of events especially those that are negative and unexpected (Weiner 2006). Hennig-Thurau and Walsh (2003) state "since the reader has only limited knowledge and trust of the author of an online articulation the quality of the contribution could be expected to serve as a potent moderator of the articulation-behavior relationship. We therefore posit the following hypotheses: H1. Subjects exposed to electronic NWOM describing a high level of service failure will provide lower scores on measures of (a) firm competence, (b) attitude toward the firm, (c) positive word of mouth, and (d) behavioral intention than will subjects exposed to electronic NWOM describing a low level of service failure. H2. Subjects exposed to electronic NWOM with a warning intent will provide lower scores on measures of (a) firm competence, (b) attitude toward the firm, (c) positive word of mouth, and (d) behavioral intention than will subjects exposed to electronic NWOM with a vengeful intent. H3. Level of service failure in electronic NWOM will interact with the perceived intention of the electronic NWOM, such that there will be a decrease in mean response on measures of (a) firm competence, (b) attitude toward the firm, (c) positive word of mouth, and (d) behavioral intention from electronic NWOM with a warning intent to a vengeful intent. The main study involved a2 (service failure severity) x2 (NWOM with warning versus vengeful intent) factorial experiment. Stimuli were presented to subjects online using a mock online web posting. The scenario described a service failure associated with non-acceptance of a gift card in a brick-and-mortar retail establishment. A national sample was recruited through an online research firm. A total of 113 subjects participated in the study. A total of 104 surveys were analyzed. The scenario was perceived to be realistic with 92.3% giving the scenario a greater than average response. Manipulations were satisfactory. Measures were pre-tested and validated. Items were analyzed and found reliable and valid. MANOVA results found the multivariate interaction was not significant, allowing our interpretation to proceed to the main effects. Significant main effects were found for post intent and service failure severity. The post intent main effect was attributable to attitude toward the firm, positive word of mouth and behavioral intention. The service failure severity main effect was attributable to all four dependent variables: firm competence, attitude toward the firm, positive word of mouth and behavioral intention. Specifically, firm competence for electronic NWOM describing high severity of service failure was lower than electronic NWOM describing low severity of service failure. Attitude toward the firm for electronic NWOM describing high severity of service failure was lower than electronic NWOM describing low severity of service failure. Positive word of mouth for electronic NWOM describing high severity of service failure was lower than electronic NWOM describing low severity of service failure. Behavioral intention for electronic NWOM describing high severity of service failure was lower for electronic NWOM describing low severity of service failure. Therefore, H1a, H1b, H1c and H1d were all supported. In addition, attitude toward the firm for electronic NWOM with a warning intent was lower than electronic NWOM with a vengeful intent. Positive word of mouth for electronic NWOM with a warning intent was lower than electronic NWOM with a vengeful intent. Behavioral intention for electronic NWOM with a warning intent was lower than electronic NWOM with a vengeful intent. Thus, H2b, H2c and H2d were supported. However, H2a was not supported though results were in the hypothesized direction. Otherwise, there was no significant multivariate service failure severity by post intent interaction, nor was there a significant univariate service failure severity by post intent interaction for any of the three hypothesized variables. Thus, H3 was not supported for any of the four hypothesized variables. This study has research and managerial implications. The findings of this study support prior research that service failure severity impacts consumer perceptions, attitude, positive word of mouth and behavioral intentions (Weun et al. 2004). Of further relevance, this response is evidenced in the online context, suggesting the need for firms to engage in serious focused service recovery efforts. With respect to perceived intention of electronic NWOM, the findings support prior research suggesting reader's attributions of the intentions of a source influence the strength of its impact on perceptions, attitude, positive word of mouth and behavioral intentions. The implication for managers suggests while consumers do find online communications to be credible and influential, not all communications are weighted the same. A benefit of electronic WOM, even when it may be potentially damaging, is it can be monitored for potential problems and additionally offers the possibility of redress.