• 복식문화연구
• /
• 제22권6호
• /
• pp.890-898
• /
• 2014

This study focuses on the effects of dyeing conditions and mordanting conditions, changes of colorfastness, antibacterial properties and UV protective of silk fabric dyed with Laminaria japonica extracts. A natural colorant was extracted from Laminaria japonica using distilled water as extractants. According to the results, maximum dye uptake (K/S) were obtained at 100% V/V colorant concentration, $80^{\circ}C$, 60 min and pH 2. Silk fabric was dyed with Laminaria japonica extract at $80^{\circ}C$ for 60 min with pre-treatment or post-treatment of various metal salts as mordants. The Laminaria japonica extracts produced yellow hue on silk fabric in pre-mordanting and manifested green yellow hue mordanted with $CuSO_4$ in post-mordanting method. Mordant $CuSO_4$ for silk fabric was found to give good light fastness (rating 4). UV protection property did not increase significantly upon mordanting.

• 한국염색가공학회지
• /
• 제9권6호
• /
• pp.33-41
• /
• 1997

This paper surveys the extraction condition of polygenetic natural dye, Sappan Wood and the effect of ash to the dyeability and fastness. The appropriate time for extracting Sappon Wood was 1hour. The pH was increased as the amount of ash increase. The pH was nearly invariable according to the time of ash solution, the extracting times and temperature. Absorbance of dyeing fabrics was about 480nm. From the result of K/S value determination of fabrics, 10g/$\ell$ quantity of ash was surfficient for treatment and the amount of Sappon Wood was in 100% o.w.f.. K/S value of fabrics pre-mordanted or post-mordanted were higher than that of fabrics simultaneous mordanted.K/S value was increased as pH of mordanting bath decrease and pre-mordanting and post-mordanting fabrics increased the amount of absorption (K/S value) compared with non-mordanted fabrics. It was found that pH of mordanting bath affected the amount of absorption and color change of dyed fabrics. Light fastness of fabric dyed was very poor and the fastness of fabric dyed was not influenced by the mordanting conditions and methods.

• 한국의류학회지
• /
• 제43권2호
• /
• pp.228-242
• /
• 2019

This research investigated the effect of mordants on the degradation of madder dye in silk when silk was treated by the H2O2/UV condition as a laboratory simulation of burial induced degradation. Alum, iron, and alum/iron composite mordanting methods were applied to silk before dyeing with madder dye. Dye extracted from silk was examined using HPLC-DAD-MS analysis. The abundance of the chromatogram peak at 8.88 min retention time was used as the concentration of alizarin pigment in silk. K/S values, CIE $L^{\ast}a^{\ast}b^{\ast}$ values; in addition, Munsell HVC values were obtained using a spectrocolorimeter. The findings indicated that alizarin degraded most severely in silk mordanted by alum/iron composite mordanting than alum mordanting or iron mordanting. Mordanting with alum alone provided a relatively lower dye fixation at the point of dyeing; however, it provided a better survival of alizarin after 12 hours of degradation treatment.

• 복식문화연구
• /
• 제11권1호
• /
• pp.66-74
• /
• 2003

This study is to improve the worst lightfastness of a natural dye. To modify the fiber surface, low temperature oxygen plasma was carried out on silk fabric. The result is followed below after the examination of surface shape, dyeability, color change, UV absorbent influence and lightfastness. 1. When electric discharge outputs are 60W, 80W and 100w, and processing times are 10minutes, 20minutes and 40minutes, the etching effect of surface increased as electric discharge outputs and processing times increased. 2. When examined UV absorbent for 5hours, 10hours, 20hours, 40hours and 80hours, the value changes of E are 1.47, 2.51, 2.91, 3.71, 4.51 and 5.31 in case of Al pre-mordanting/ prasma 80W, 20min./ UVabsorbent 5% (100:1), 2.31, 2.47, 3.84, 3.90, 3.61 and 4.42 in case of Al pre-mordanting/prasma 80W, 20min.1 UV absorbent 5% (o.w.f.). The lightfastness decreased when UV absorbent increased. 3. Dyeability of the samples pre-treated with five different methods was in the following order: plasma processing for 20minutes at 60W/Al pre-mordanting > Al pre-mordanting > plasma processing for 20minutes at 60W > Al after-mordanting. non mordanting Plasma treatment had superior effect on dyeability. 4. When UV absorbent was applied in fabric, the sample under higher electric discharge out puts showed more effective in improving lightfastness.

• 한국의류학회지
• /
• 제26권9호
• /
• pp.1301-1307
• /
• 2002

This paper surveys the mordanting and dyeing properties of Rubia akane Nakai appropriate extraction, dyeing and mordanting conditions of Rubia akane Nakai were determined, and the effect of mordanting method on dye uptake and color fastness of the dyed fabric was investigated. The optimum temperature to extract Rubia akane Nakai was during 1 hour in 8$0^{\circ}C$. The effective dyeing temperature and time of silk were 8$0^{\circ}C$, 1hour. The silk fabrics dyed with purpurin appeared red color, with alizarine appeared yellow-brown and with Rubia akane Nakai appeared yellow orange. K/S value of the dyeing fabrics was increased by pre-mordanting treatment. Mordant as Sn and Fe was better than anything else in K/S value. Mordanting treatment method affected color change of the dyed silk. In the case of Rubia akane Ntkai light fastness was increased by Fe and Al mordant treatment, Perspiration fastness of Rubia akane Nakai appeared more than 3 grades geneally. Fastness of abrasion and dry-cleaning appeared mon than 4～5 grades and these fastness improvement were generally effective for post-mordanting treatment.

• 복식문화연구
• /
• 제13권5호
• /
• pp.686-698
• /
• 2005

In this study, simultaneous mordanting method of dyeing in the Caesalpinia sappan dye liquor mixed with the rice straw ash solution was employed. The dyeing effects were compared and reviewed according to the changes of dyeing mechanisms of pre-mordanting and simultaneous mordanting using ash solutions. By the direct addition of the ash solution, the pH of the liquor was abruptly changed. In the case of maintaining the pH value of the ash solution at about 7 or 8, compared to the pre-mordanting, $a^{*}$ values increased and $b^{*}$ values decreased. As a result, it is highly desirable in terms of selective emphasis on the reddish hue. The color development, differentiated from that obtainable by the dyeing of chitosan pre-treated fabric, was obtained due to the effect of the water soluble chitosan component on the dyeing mechanism.

• 복식문화연구
• /
• 제13권2호
• /
• pp.248-254
• /
• 2005

In this study, wool fabric specimens were pre-mordanted using Sn, Al, Cu, Cr, and Fe, and subsequently dyed using cochineal, maintaining the pH of the dye bath constant using pH buffer solutions of 4, 5, 6, 7, and 8. In the case of wool fabric specimen, regardless of the type of mordanting agents, peak dye-uptake amount was obtained at the acidic region, pH 4, and above pH 6, the dye-uptake amount decreased remarkably. Differing from the cotton fabric case, the dyed wool fabric specimen exhibited red shade even in the case of non-mordanting, at the region of pH values of 4 and 5. It is presumed that in the acidic dye bath the effect of cationic amine group present in the structure of wool fiber molecules took place. The amount of color difference, among the mordanting agents, due to the increase of pH value, was highest for the Fe mordanting case. It seems, therefore, that the Fe mordanting is affected most by the pH value.

• 한국의류학회지
• /
• 제26권3_4호
• /
• pp.422-430
• /
• 2002

Dyeing properties of the colorants from gromwell on cotton fabric were investigated. The effects of dyeing conditions on dye uptake and the effects of mordants and mordanting methods on K/S value, color change and colorfastness were explored. Gromwell colorants showed low affinity to cotton fabric, and its adsorption isotherm was Freundlich type close to Langmuir type. Therefore, it was considered that hydrogen bonding and Vander Waals force were involved in the adsorption of gromwell colorants to cotton fabric. Pre-mordanting method except Sn mordant gave higher K/S value but it was not significant. Gromwell colorants produced mainly R and RP color on cotton fabric depending on mordants and mordanting method. Dyed cotton fabric showed generally high colorfastness irrespective of mordanting treatment. Light colorfastness was increased by repeat dyeing and Fe and Sn mordanting.

• 한국의류학회지
• /
• 제25권8호
• /
• pp.1484-1492
• /
• 2001

For the purpose of standardization and practicability of dyeing by natural dye, the mordanting and dyeing properties of Lithodpermum officinale were studied. Appropriate extraction, dveing and mordanting conditions of Lithodpermum officinale were determined, and the effect of mordanting no dye uptake and color fastness of dyed fabric was investigated. The maximum absorbances of Lithopermum officinale solution were at 521 and 561 mn, shikonin solution were 517 and 556 mn. According to the UV-VIS spectroscopy of shikonin solution showed batho chromic shift with the increase of temperature and the absorbance of shikonin solution increased with the increase of temperature. The color of Lithodpermum officinale solution was affected by pH 8∼9, they became dark, reduced reddish and bluish. The optimum conditions for extraction from Lithodpermum officinale were at 80$\^{C}$ and for 1 hour and at 25$\^{C}$ for 24 hours. And effective dyeing conditions with silk fabric were temperature at 80∼100$\^{C}$ and period for 60min. K/S value and color fastness of dyed fabrics were increased by mordanting treatment. In the case of Lithodpermum officinale light fastness was better than Sophora japonica, Gaesalpinia Sappan, Rhusjara,. Cochineal dyeing fabrics. Perspiration fastness of Lithodpermum officinale were good. Fastness of abrasion and dry-cleaning were good these fastness improvement were generatlly effected by post-mordanting treatment.

• 패션비즈니스
• /
• 제11권1호
• /
• pp.136-148
• /
• 2007

African marigold is a common plant easily available in many flower beds. It has been reported as a practical and prospective resource of dyes since the dyes can be extracted from their bodies as well as petals. In this research, cotton and ramie fabrics which are made from natural cellulose were dyed using the extract of the African Marigold which is a variety of marigold. Dyeing tests were carried out under different pH of the dye solution and mordants. Dyeability was evaluated by examining and measuring surface color, K/S value, and the changes in the maximum absorption wavelength. The probability of improving dyeability was investigated by pre-mordanting with pre-treated chitosan. For the dyeing with marigold extract, the color tone did not differ by pre-mordanting and non-mordanting. Reaction with post-mordanting was excellent, which was colored in various yellow series. The best dyeability was achieved in dye solution of pH 6.5-7.0 which is not conditioned. The largest K/S value and color difference were obtained in tin mordanting. The dye uptake was greatly increased in chitosan pre-treated mordanting compared with the post-mordanting without chitosan pre-treatment. Due to its high heat resistance, African Marigold extract is easy for dye extraction and dyeing, and its dyeability is excellent for natural cellulose fibers. Also, colorfastness was proved to be practically usable.