• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.296-300
• /
• 2003

The autopilot system targets decreasing labor, working environment improvement, service safety security and elevation of service efficiency. Ultimate purpose is minimizing number of crew for guarantee economical efficiency of shipping service. Recently, being achieving research about Course Keeping Control, Track Keeping Control, Roll-Rudder Stabilization. Dynamic Ship Positioning and Automatic Mooring Control etc. which compensate nonlinear characteristic using optimizing control technique. And application research is progressing using real ship on actual field. Relation of Rudder angle which adjusted by Steering Machine and ship-heading angle are non-linear. And Load Condition of ship as non-linear element that influence to Parameter of ship. Also, because the speed of a current and direction of waves, velocity and quantity of wind etc. that is disturbance act in non-linear from, become factor who make serv ice of shipping painfully. Therefore, service system of shipping requires robust control algorithm that can overcome nonlinearity. In this paper, Using fuzzy algorithm ,Design autopilot system of ship that could overcome the non-linear factor of ship and disturbance and examined result through simulation.

• Smart Structures and Systems
• /
• v.9 no.1
• /
• pp.71-104
• /
• 2012

In this research, a typical tension-leg type of floating platform incorporated with an innovative concept of underwater tuned liquid column damper system (UWTLCD) is studied. The purpose of this study is to improve the structural safety by means of mitigating the wave induced vibrations and stresses on the offshore floating Tension Leg Platform (TLP) system. Based on some encouraging results from a previous study, where a Tuned Liquid Column Damper (TLCD) system was employed in a floating platform system to reduce the vibration of the main structure, in this study, the traditional TLCD system was modified and tested. Firstly, the orifice-tube was replaced with a smaller horizontal tube and secondly, the TLCD system was combined into the pontoon system under the platform. The modification creates a multipurpose pontoon system associated with vibration mitigation function. On the other hand, the UWTLCD that is installed underwater instead would not occupy any additional space on the platform and yet provide buoyancy to the system. Experimental tests were performed for the mitigation effect and parameters besides the wave conditions, such as pontoon draught and liquid-length in the TLCD were taken into account in the test. It is found that the accurately tuned UWTLCD system could effectively reduce the dynamic response of the offshore platform system in terms of both the vibration amplitude and tensile forces measured in the mooring tethers.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.2
• /
• pp.135-142
• /
• 2015

The float over method is the most preferred method for installing heavy topside onto a jacket platform. A very complex platform with multiple jacket structures on a specific field requires multiple installation procedures. This study validated the installation of two topsides using a single installation barge to reduce the operation and installation cost. The hydrodynamic properties of the installation barge during the installation of two topsides were calculated. The tension and fender forces during docking were investigated to show the validity of the proposed dual topside installation method. In conclusion, the operational safety of the proposed procedure was validated through the calculation of the motion of the installation vessel and loads on the jacket legs.

• Journal of Ocean Engineering and Technology
• /
• v.38 no.3
• /
• pp.137-147
• /
• 2024

Green hydrogen presents a sustainable and environmentally friendly solution for clean energy production and transportation. This study aims to identify the optimal profile of green hydrogen transportation risers originating from a floating offshore wind turbine (FOWT) integrated with a hydrogen production facility. Employing the Cummins equation, a fully coupled dynamic analysis for FOWT with a flexible riser was conducted, with the tower, mooring lines, and risers described using a lumped mass line model. Initially, motion response amplitude operators (RAOs) were compared with openly published results to validate the numerical model for the FOWT. Subsequently, a parametric study was conducted on the length of the buoyancy module section and the upper bare section of the riser by comparing the riser's tension and bending moment. The results indicated that as the length of the buoyancy module increases, the maximum tension of the riser decreases, while it increases with the lengthening of the bare section. Furthermore, shorter buoyancy modules are expected to experience less fatigue damage, with the length of the bare section having a relatively minor impact on this phenomenon. Consequently, to ensure safety under extreme environmental conditions, both the upper bare section and the buoyancy module section should be relatively short.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.4
• /
• pp.423-429
• /
• 2017

As invigoration plan of the marine tourism, Busan City has the plan to operate the cruise ship inside of the harbor, but the area has narrow water way with heavy traffic. As a result it is requested to evaluate the safety for the preparation of actual navigation. In this study, the Ship Handling Simulation (SHS) Assessment was conducted, which is regulated by the Maritime Traffic Safety Audit Scheme (MTSAS) in compliance with the Marine Safety Law and the Maritime Traffic Risk Assessment System based on the Electronic Chart Display and Information System (ECDIS). The proximity assessment, control assessment and subjective assessment were implemented, which is enacted by the Marine Safety Law by using the SHS. In the case of proximity assessment, the probability of trespass was not analyzed. As the control assessment, the swept path was measured at 11.7 m and 11.5 m for port entry and port departure respectively, which exceeded the width of the model vessel, 10.4 m over; it was considered as a marginal factor. As a result of the subjective evaluation of the navigator, there would be no difficulty on ship maneuvering by paying particular attention to the mooring vessel nearby the Busan Bridge and Yeongdo Bridge as well as the coming vessel from the invisible sea area when the vessel is entering and departing the port. The Marine Traffic Risk Assessment System analyzed as [Cautious] level until the vessel passed the Busan bridge and the curved area at 5 kts and it became to [Dangerous] level from where it left 75 m to the Busan Bridge. When the vessel passed the Busan Bridge and the curved area at 10 kts and entered the narrow area, it indicated the [Dangerous] level and became to [Very dangerous] level from where it left 410 m to the Busan bridge. In conclusion, the vessel should maintain at the speed of 5 kts to reduce the risk when it passes this area.

• Journal of Navigation and Port Research
• /
• v.45 no.1
• /
• pp.9-15
• /
• 2021

According to IMO, MASS is defined as a vessel operated at various levels independent of human interference. The safety navigation support service for MASS is designed to improve the safety and efficiency of MASS by developing public services on shore for ship arrivals/departures and for cargo handling. The safety navigation support service consists of a total of six types of services: autonomous operation, berthing/unberthing/mooring, cargo handling and ship arrival/departure service, PSC inspection, condition monitoring, and accident response support services. In order to support accident response service, the relative importance of a bridge navigational equipment was assessed by stratifying the navigation system to provide safe and efficient support services by objective judgment through specific and quantitative methods using AHP, one of decision-making methods used by an expert group. The survey was conducted by dividing the bridge navigational equipment into depth, location, and speed information. As a result of applying the AHP method, the importance of depth, location, and speed information was assessed. The relative importance of each equipment for providing location information was also assessed in order of Radar, DGPS, ECDIS, Gyro compass, Autopilot, and AIS. This was similar to survey results on the utilization of each operator's preference and its impact on marine accidents.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.946-954
• /
• 2022

More than half of barges have been surveyed and designated as an "unmanned barge". The main advantage of the unmanned barge is that it can carry more cargo equivalent to 25 percent of freeboard compared to that of a manned barge. In contrast, it needs an onboard crew barge because the bargeman is in charge of several tasks during sailing such as mooring or unmooring barges to or from a wharf, dropping and heaving up an anchor and turning on and of navigational lights and shapes. The instant recognition is that a tug assume the responsibility of operating a barge; however, different situations exist in which the shipper, as the operator of the barge, hires a tug. Although a tug might be a carrier of a barge under a specific contract, the master of the tug should fulfill his duty to complete its voyage. Most masters are not provided with the particulars of a barge and the information regarding the bargemen onboard, which is believed not to respect the master's authority and lead to an unintended violation of relevant laws. This paper presents three recommendations for resolving these issues: the policy approach for changing unmanned barges to manned barges, issuing a minimum safe manning certificate, and providing the master of tug information on the barge and the crew onboard. Thus, the proposed approach can be expected to improve the crew's working conditions, diminish the violation of the maximum number of persons onboard the barge, and ensure the authority of the master of tug through such recommendations.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.spc
• /
• pp.11-17
• /
• 2022

In this study, we address the development of a floating platform system based on a unmanned surface vessel for wide-area sensing and monitoring of hazardous and noxious substances (HNSs). For long endurance, a movable floating platform with no mooring lines was used and modified for HNS sensing and monitoring. The floating platform was equipped with various sensors such as optical and thermal imaging cameras, marine radar, and sensors for detecting HNSs in water and air. Additionally, for experiment validation in real outdoor environments, a portable gas-exposure system (PGS) was built and installed on the monitoring system. The software for carrying out the mission was integrated with the Robot Operating System (ROS) framework. The practical feasibility of the developed system was verified through experimental tests conducted in inland water and real-sea environments.

• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.781-786
• /
• 2010

In this study, a new concept of ocean transport system, called the mobile harbor serving for a short distance transport of containers with cargo handling cranes between mother containerships and coastal ports, is introduced. Instead of direct berthing a very large containership at the coastal port, Mobile Harbor is moving to the offshore mooring basin with enough water depth condition. Therefore, investigation of the coastal environment, technical condition and limitation of the domestic trade ports for the application of Mobile Harbor, is essential process. To figure out the accessibility of mobile harbor, the environmental conditions, the cargo handling capacity and marine traffic volume and flow pattern has been analyzed with the tools for marine traffic simulation and virtual navigation aids system. The most proper Mobile Harbor mooring areas among trade ports of the south and east coast are selected by analyzing the obtained information and evaluating its application: (1) Under natural environmental conditions such as air and sea weather, three candidate areas are selected such as Masan port, Ulsan port, and Busan(New port) port. (2) Under marine traffic and appropriateness of water facilities, three candidate areas are selected as Mokpo port, Busan(New port) port, and Donghae & Mookho port (3) For a region-based analysis considering handling capacity and the local managed trade ports in vicinity, three candidate areas are selected as Busan region, Yosu & KwangYang region, and Mokpo region. Through this study, the basic guideline for selection of optimum trade port and offshore mooring basin for mothership and Mobile Harbor is recommended. In order to apply the Mobile Harbor to the real water, navigaton aids as the virtual route identification with AIS must be introduced for maritime safety in the vicinity of Mobile Harbor area which berthing and cargo handling is being conducted.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.423-430
• /
• 2012

The purpose of Speed limit at sea is to keep harbor calmness, to maintain efficient traffic flow and to prevent maritime accidents. The Korean Regional Maritime Affairs and Port Office(KRMAPO) specified and enforced the ship's speed limits at the 19 harbors around the Korean coasts. However, problems have been raised to the adequacy of speed limits. This paper made a research on the speed limit set standards, analyzed vessel traffic survey and the dilemma on the specified speed limits imposed by KRMAPO. The result of this study has shown an overall average of 48 % violation rate on speed limit with passenger ships and large vessels of more than 5,000 tons having higher violation rate. Average speed was higher than the limit speed in some harbors and deviation of 4.2 to 5.2 knots was investigated. Further, harbors having higher average speed also have higher deviation accident incidence. Therefore, this paper had confirmed that there is a need for institutional review and improvement of Korea's port and fairways speed traffic management.