• 공업화학
• /
• 제10권6호
• /
• pp.949-953
• /
• 1999

반도체 봉지재에 쓰이는 EMC(Epoxy Molding Compound)는 고농도의 충전제를 함유하고 있는데, 이 충전제의 양과 성질에 따라 유동 특성이 크게 달라진다. 본 연구에서는 충전제의 농도, 입자모양, 크기에 따른 EMC(에폭시/실리카)의 점도변화 특성을 조사하였고, 이를 Mooney 식을 사용하여 예측하여 보았다. Mooney 식에 포함되어 있는 최대 충전율과 형상인자 중 최대 충전율은 Ouchiyama의 충전 모델과 Taguchi의 방법을 이용하여 구하였고, 형상인자는 실험자료를 이용하여 구하였다. 구해진 Mooney 식은 EMC의 점도 거동을 잘 예측하였다.

• 한국산업융합학회 논문집
• /
• 제2권1호
• /
• pp.97-103
• /
• 1999

The power curve during rubber mixing presents useful information for the understanding of rubber mixing process, because the power curve is determined the mixing state of rubber at the point. The time to the second peak on the power curve is known as carbon black incorporation time, BIT. This study gets the quantity relationship of BIT and viscosity of natural rubber, so by determining the mixing time of the compound on the ground of viscosity of the raw rubber. The mixing with natural rubber and carbon black is examined for various grade natural rubbers, encompassing a wide range of Mooney viscosity. Alter smoothing the mixing power curve using a polynomial, the carbon black incorporation time, BIT, was determined time to second power peak on the curve, The BIT's versus specific values on Mooney viscometer test curve show a linear relation, Especially, the peak of initial maximum torque on Mooney viscometer curve, PMT, is most relevant property relating to the BIT. PMT is useful index for determined optimum mixing time, To apply this results at the mixing, we effectively control the natural rubber mixing but can also know the grading of natural rubber upon processability.

• Elastomers and Composites
• /
• 제7권1호
• /
• pp.21-37
• /
• 1972

We have studied the blending effects of Diene NF 35R and Turfdene 1000R at various blending ratios 100/0, 70/30, 50/50, 30/70, 0/100, and of carbon black NAF and ISAF at various compounding ratios of 55 PHR, 65PHR, 75PHR for tyre tread rubber. As the results, it was found that; 1. For tyre tread rubber, as the blending ratio, Diene NF 35R/Turfdene 1000R, indicated 30/70, the physical properties we examined were most excellent. 2. Excellent result was obtained in case of carbon black compounding ratio of 63PHR. The compounding of ISAF made better result than that of HAF for tensile strength, tearing strength, and abrasion quantity. 3. Heat buildup obtained from compounding carbon black HAF indicated low temperature than that from compounding carbon black ISAF. As the compounding amount of carbon black increased, the heat buildup improved, and as the blending amount of Diene NF 35R decreased, the heat buildup dropped. 4. Carbon black was more efficient to Turfdene 1000R than to Diene NF 35R. 5. In this pysical properties, mooney viscosity, and mooney scorch time, as the compounding amount of carbon black increased, the values of mooney viscosity increased, but that of mooney scorch time dropped.

• 펄프종이기술
• /
• 제29권2호
• /
• pp.7-15
• /
• 1997

High shear viscosity at several solids levels was measured for a number of pigment slurries and coating colors containing either anionic or amphoteric latex and analyzed according to Mooney and Eiler equations. Maximum packing fraction and intrinsic viscosity were obtained and compared. Eiler equation provides more credible information than Mooney equation on particle packing and intrinsic viscosity. The packing fraction obtained from Eiler equation was slightly greater than that obtained from static FCC measurement indicating the influence of pigment movement under the dynamic condition. Amphoteric latex caused 4-5% increase of maximum packing fraction of a coating color when its pH is lowered from 7 to 6, while anionic latex did not show any significant change in packing characteristics.

• 유변학
• /
• 제11권2호
• /
• pp.128-134
• /
• 1999

본 논문에서는 자성입자인 막대 모양의 $\gamma$-$Fe_{2}O_{3}$ 와 $CrO_2$ 분산액에 대한 유변학적 거동을 조사하였다. 특히 입자의 농도와 전단속도의 변화에 따른 자성 입자 분산액의 점도 거동을 살펴봄으로써 분산액의 미세구조 상태 및 입자의 배향에 영향을 주는 입자의 모양이 점성 소모에 미치는 영향을 조사였는데, 평균장(mean field) 이론과 Mooney식을 통해 분산액의 점도 거동을 해석하였다. 본 연구에서 사용한 모든 자성입자 분산액의 본성 점도가 희박 분산액의 수력학 이론으로부터 얻는 값보다 큰 것을 알 수가 있었는데, 이러한 사실은 분산액내에 자성입자의 고유한 인력에 기인하여 분산 용매를 내포하고 있는 덩어리(flocs)의 존재를 뒷받침하고 있다.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.667-671
• /
• 1995

The viscometric technique is used to study the effects of microstructure on the viscosity (viscosity vs. concentration or shear rate) of magnetic particle suspensions. In this characterization, measurement of suspension viscosity is used to obtain the dependence of viscous energy dissipation on microstructural state of dispersions. Microstructural shape effects which are related to particle orientation are then indirectly obtained. Empirical formulas from mean field theory and the Mooney equation, which are applicable at high concentration of magnetic particles, are used to relate viscosity to particle concentration. The validity and physical meaning of these equations are discussed.

• Elastomers and Composites
• /
• 제8권1호
• /
• pp.33-51
• /
• 1973

We have studied the blending effects of Diene NF 35 R and Alfin 1530 at various blending ratios, 100/0, 70/30, 50/50, 30/70, 0/100, and of carbon black HAF-HS and ISAF-HS at various compounding ratios of 45 PHR, 55 PHR, 65 PHR, for tyre tread rubber. As the results, it was found that; 1. For tyre tread rubber, as the blending ratio, AR 1530/Diene NF 35R, indicated 70/30, the physical properties we examined were most excellent. 2. Excellent result was obtained in the case of carbon black compounding ratio of 55 PHR. The compounding of ISAF-HS made better result than that of HAF-HS for tensile strength, but the compounding of HAF-HS made better result than that of ISAF-HS for tearing strength and best result for abrasion quantity. 3. Heat buildup obtained from compounding carbon black HAF-HS indicated low temperature than that from compounding carbon black HAP-HS. As the compounding amount of carbon black increased, and as the blending amount of AR 1530 decreased, the heat buildup increased. 4. Carbon black was more efficient to AR 1630 than io Diene NF 35 R. 5. In the physical properties, mooney viscosity and mooney scorch time, as the compounding amount of carbon black increased, the values of mooney viscosity increased, but that of mooney scorch time had a max. point at the compoundiug amount of carbon black, 55 PHR.

• Elastomers and Composites
• /
• 제34권2호
• /
• pp.121-127
• /
• 1999

스티렌-부타디엔 고무(styrene-butadiene rubber :SBR)의 가공성과 기계적 물성을 조절하는 방안의 일환으로, 고분자량 SBR(high molecular weight SBR : HM-SBR)과 저분자량 SBR (low molecular weight SBR : LM-SBR)의 혼합물의 특성을 조사하였다. HM-SBR/LM-SBR의 LM-SBR 함량이 증가함에 따라 경화전 혼합물의 Mooney 점도와 경화에 따른 토오크 증가치는 감소하고 가황 후 혼합물들의 Shore A 경도와 반발탄성율은 감소를 보였다. 또한 LM-SBR 함량의 증가에 따라 혼합물들의 가황 후 유리전이온도는 일정하지만 고무상태에서 tan ${\delta}$는 증가를 보였다. LM-SBR 함량에 따른 가황 전 혼합물들의 Mooney 점도 감소는 LM-SBR의 가소화 효과와 분자량 분포 증가에 기인하는 것으로 해석하였다. 가황 HM-SBR/LM-SBR 혼합물의 기계적 물성 변화는 고무 혼합물의 가교밀도 감소에 기인하는 것으로 판단되었다.

• Elastomers and Composites
• /
• 제25권4호
• /
• pp.280-290
• /
• 1990

The effect of surface treatment of kaolinite with silane coupling agent on the reinforcement of SBR was investigated. The possibility of the practical use of kaolinite as an organic filler was also scrutinized and it was found that the reinforcement of SBR was improved by modifying surface of the cheap inactive inorganic filler with organic silane coupling agents. 3-Chloropropyltrimethoxysilane(C-series), 3-mercaptopropyltrimethoxysilane(M-series) and 3-aminopropyltriethoxysilane(A-series) were used as coupling agents. To test the material properties of vulcanized and unvulcanized SBR, Mooney viscosity, modulus, elongation and fractured surface measurements by SEM were carried out by changing the amount of silane coupling agents. Torqe of the unvulcanized SBR following the measurement of the degree of vulcanization was to be increased as the amount of silane was increasing, and Mooney viscosity of M-series and A-series was also increased.

• 폴리머
• /
• 제25권2호
• /
• pp.233-239
• /
• 2001

Mechanical mixing법으로 ethylene propylene diene terpolymer (EPDM)과 ethylene propylene diene terpolymer (EPDM)과 acrylonitrile butadiene rubber (NBR) 블렌드 혼련물을 제조하여, 이들의 무늬 점도, 가교 거동, 영구 압축 줄음율 및 동적 기계적 성질 등을 검토하였다. Rheovibron에 의한 동적 특성 측정의 결과로부터 EPDM/NBR 블렌드는 -43$^{\circ}C$ 및 -4$^{\circ}C$ 부근에서 두 개의 전이를 보였으며 이를 각각 NBR 고무 및 EPDM 고무의 T$_{g}$로 해석하였다. tan${\delta}$ 피크의 위치는 NBR 고무의 함량이 증가함에 따라 고온 쪽으로 이동함을 확인할 수 있었다. 또한 NBR 고무량이 증가할수록 최적 가황시간이 단축되는 경향을 보였다.