• Advances in aircraft and spacecraft science
• /
• 제4권5호
• /
• pp.529-541
• /
• 2017

Landing phase is one of the crucial and most important phases during robotic aerospace explorations. It concerns the impact of the landing module of a spacecraft on a celestial body. Risks and uncertainties of landing are mainly due to the morphology of the surface, the possible presence of rocks and other obstacles or subsidence. The present work quotes results of a computational analysis direct to investigate the stability during the landing phase of a lander on Phobos, a Mars Moon. The present study makes use of available software tools for the simulation analyses and results processing. Due to the nature of the system under consideration (i.e., large displacements and interaction between several systems), multibody simulations were performed to analyze the lander's behavior after the impact with the celestial body. The landing scenario was chosen as a result of a DOE (Design of Experiments) analysis in terms of lander velocity and position, or ground slope. In order to verify the reliability of the present multibody methodology for this particular aerospace issue, two different software tools were employed in order to emphasize two different ways to simulate the crash-box, a particular component of the system used to cushion the impact. The results show the most important frames of the simulations so as to provide a general idea about how lander behaves in its descent and some trends of the main characteristics of the system. In conclusion, the success of the approach is demonstrated by highlighting that the results (crash-box shortening trend and lander's kinetic energy) are comparable between the two tools and that the stability is ensured.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.479-490
• /
• 2000

The microstructure of Ni-YSZ composite as an anode of SOFC was investigated as a function of Ni content(10-70 vol%) in order to examine the correlation between microstructural-and electrical property. Image analysis based on quantitative microscopy theory was performed to quantify the microstructural property. We could get the informations about the size and distribution, contiguity and interfacial area of each phase or between the phases from the image analysis. According to the image analysis, contiguity between the same phae was mainly dependent on the amount of the phase while the contiguity between different phases was additionally influenced by the microstructural changes, especailly by the coarsening of the Ni phase. The whole length of pores perimeter was increased as Ni content increased, which indicated the overall microstructural evolution was mostly related with the coarsening of Ni phase. Ni-Ni interfacial area was also gradually increased as Ni content increased but controlled by pore phase at low Ni content region and by YSZ phase at intermediate Ni content region. These quantified microstructural properties were used to characterize the electrical properties of Ni-YSZ composite.

• Elastomers and Composites
• /
• 제52권3호
• /
• pp.173-179
• /
• 2017

Side-chain liquid crystalline polymers having polysiloxane skeletons were synthesized by a thiol-ene reaction, using two kinds of mesogenic groups: a cholesteryl group for induction into a cholesteric liquid crystal phase and a triazomesogenic group for imparting light-sensitivity. All the synthesized polymers were crystalline, except the one with a single cholesteryl group. Crystallinity, glass transition temperature, and melt transition temperature increased with increasing content of the azomesogenic group. The polymer (P-C10A0) with a single cholesteryl group has a cholesteric phase, the one (P-C0A10) with a single azomesogenic group has a smectic phase, and those with both types of mesogenic groups showed both smectic and cholesteric phases. The temperature ranges of the two liquid crystalline phases in the co-polymers were independent of the contents of the two types of mesogenic groups. The rate of photoisomerization of the light-sensitive azobenzene group in the polymer decreased with increasing azobenzene content due to steric hindrance between the azomesogenic groups.

• 한국군사과학기술학회지
• /
• 제15권1호
• /
• pp.28-35
• /
• 2012

We propose the live fire test process model based on systems engineering which consists of 4 phases i.e., review, setup, conduct and result. We also suggest the 4 phases acquisition model consisting of planning, execution, evaluation and disposal for test infrastructure. CMMI, TMMi and PMBOK are referred and hierarchial analysis method are adopted in developing the models. Thus, the detailed sub-processes are designed after defining higher level processes first. The higher level processes are defined by extracting common areas of all the test types. The low level processes for each specific test are designed by tailoring the higher level processes. By applying the proposed test process models into collaboration tool and information system, effective and systematic test processes for weapon systems are established.

• 대한한방부인과학회지
• /
• 제23권2호
• /
• pp.124-130
• /
• 2010

Purpose: The aim of the study was to investigate menstrual cycle phase differences in Heart Rate Variability(HRV) in dysmenorrhea patients. Methods: 16 dysmenorrhea patients were enrolled. The severity of dysmenorrhea was measured by Visual Analog Scale(VAS). Recordings for HRV analysis were obtained during the two phases of the menstrual cycle (follicular phase 4~10 days and luteal phase 18~23 days from the start of bleeding). Results: No measure of HRV was significantly different between two menstrual cycle phases. Conclusion: We concluded that menstrual cycle was not significantly associated with changes in autonomic nervous system as measured by HRV in dysmenorrhea patients.

• 한국통신학회논문지
• /
• 제31권4C호
• /
• pp.364-370
• /
• 2006

TDMA 시스템에서 신호를 수신하기 위해서는 정확한 주파수 및 시간 동기가 필요하다. 본 논문에서는 QPSK 신호를 전송하는 TDMA 방식의 위성통신 시스템에서 훈련 신호 없이 주파수 편이를 추정하는 방법을 제안한다. 제안된 방법은 수신 신호의 두 부분에서 정확도가 높게 위상을 추정하고, 이 위상 차이로부터 주파수 편이를 추정함으로써 기존의 주파수 편이 추정 방법과 비슷한 성능을 보이면서 적은 연산량이 요구된다. 제안된 방법을 GSM을 기반으로 확장된 GMR 위성통신 시스템에 적용하고 시뮬레이션을 통해 성능을 검증한다.

• Ocean and Polar Research
• /
• 제23권2호
• /
• pp.97-107
• /
• 2001

The Sejong Formation of Late Paleocene to Eocene is a lower volcaniclastic sequence unconformably overlain by upper volcanic sequence, and distributed along the southern and southeastern cliffs of the Barton Peninsula. The Sejong Formation is divided into five sedimentary facies; disorganized matrix-supported conglomerate (Facies A), disorganized clast-supported conglomerate (Facies B), stratified clast-supported conglomerate (Facies C), thin-bedded sandstone (Facies D), and lapilli tuff (Facies E), based on sedimentary textures, primary sedimentary structures and bed geometries. Individual sedimentary facies is characterized by distinct sedimentary process such as gravel-bearing mudflows or muddy debris flows (Facies A), cohesionless debris flows (Facies B),unconfined or poorly confined hyperconcentrated flood flows and sheet floods (Facies C), subordinate streamflows (Facies D), and pyroclastic flows (Facies E). Deposition of the Sejong Formation was closely related to volcanic activity which occurred around the sedimentary basin. Four different phases of sediment filling were identified from constituting sedimentary facies. Thick conglomerate and sandstone were deposited during inter-eruptive phases (stages 1, 3 and 4), whereas lapilli tuff was formed by pyroclastic flows during active volcanism (stage 2). These records indicate that active volcanism occurred around the Barton Peninsula during Late Paleocene to Eocene.

• 열처리공학회지
• /
• 제28권4호
• /
• pp.190-199
• /
• 2015

The study is intended to investigate the effect of solution treatment on microstructure and corrosion behavior of AZ91(Mg-9%Al-1%Zn-0.3%Mn)-2%Ca casting alloy. In as-cast state, the AZ91-2%Ca alloy consisted of intermetallic ${\beta}(Mg_{17}Al_{12})$, $Al_8Mn_5$ and $Al_2Ca$ phases in ${\alpha}-(Mg)$ matrix. After the solution treatment, Al within the ${\alpha}-(Mg)$ matrix was distributed more homogeneously, along with the slight decrease in the total amount of intermetallic compounds. The corrosion resistance of the AZ91-2%Ca alloy was improved after the solution treatment. The microstructural examinations for the solution-treated samples revealed that the better corrosion resistance may well be related to the incorporation of more oxides and hydroxides such as $Al_2O_3$, $Al(OH)_3$, CaO and $Ca(OH)_2$ into the surface corrosion product without dissolution of the intermetallic phases along the grain boundaries.

• 한국BIM학회 논문집
• /
• 제1권1호
• /
• pp.26-31
• /
• 2011

국내에서 BIM의 실무 활용은 건축공사 중심으로 적용되고 있다. 건축공사의 부위별 객체 특성이 정형적, 수직적, 반복적인 형태를 갖는 반면에 토목공사의 객체 특성은 비정형적, 수평적, 비반복적인 형태를 갖으므로 3D객체 구성이 어렵기 때문이다. 본 연구에서는 토목공사의 기획단계부터 설계단계까지의 업무 및 정보관리의 문제점을 파악한 후 BIM기반에서의 적용 프로세스를 제안하며, 제시한 프로세스를 기반으로 BIM시스템을 구축하여 교량공사를 대상으로 실무 적용성을 검토한다.

• Journal of Magnetics
• /
• 제6권3호
• /
• pp.86-89
• /
• 2001

Microstructure modifications are investigated for annealed Co-based amorphous ribbon in vacuum and open air. X-ray diffraction (XRD) spectra for annealed sample in vacuum indicate atomic arrangements with initial nucleation of hcp-Co crystallite at 38$0^{\circ}C$ annealing temperature. However, the XRD spectra in samples with long annealing times of $t_a\geq300$ min demonstrate sharp and good developed surface crystalline hcp-, fcc- Co and $Co_2$Si phases. The giant magnetoimpedance (GMI) profile at 0.1 MHz displaying one-peak behavior in vacuum annealed samples at T = 38$0^{\circ}C$ irrespective of annealing time $t_a$ from 20 to 480 mim. For the annealed samples in an open air, the GMI profile shows two-peaks for $t_a$ = 20 min annealed sample. However, one of peaks disappears and an asymmetric GMI profile exhibits a drastic step-like change near zero field for $t_a\geq300$min. Such asymmetric GMI characteristics is related to the surface microstructures of fcc-Co, hop-Co and $Co_2$Si crystalline phases.