• Journal of Radiation Protection and Research
• /
• 제41권1호
• /
• pp.71-79
• /
• 2016

연구배경: 생활주변방사선 안전관리법에 의한 가공제품의 방사선학적 안전성 평가를 위해서는 가공제품에 함유된 천연방사성핵종의 정량적 평가가 필요하다. 기존 분석법을 위한 파괴적 전처리는 높은 수준의 기술과 많은 시간이 소요되고, 측정 후 가공제품의 재사용을 불가능하게 하는 단점이 있다. 본 연구에서는 가공제품에 함유된 천연방사성핵종인 토륨계열의 방사능을 평가하기 위해 전처리 과정이 생략되거나 최소화된 방법인 간단/신속 분석법을 개발하였다. 재료 및 방법: 개발된 분석법은 감마분광분석 시스템을 이용하여 전처리 없이 가공제품의 방사능을 간단하고 신속하게 측정하고, 시료의 구성물질, 밀도, 기하학적 형태에 대한 보정을 통하여 방사능을 정확하게 평가할 수 있는 방법이다. 상기 요소에 대한 보정을 위해 변환상수 개념을 도입하였으며, 방사선수송 전산모사를 통해 변환상수를 도출하였다. 본 연구의 대상으로는 일반인이 흔하게 사용하고, 인체에 착용하거나 인체 접촉이 많은 가공제품, 즉 일반인에게 상대적으로 높은 피폭방사선량을 초래할 수 있는 대표적인 가공제품이 선정되었다. 본 연구에서 선정된 가공제품은 건강목걸이, 건강팔찌, 남성용 건강보조기구, 매트 형태의 가공제품에 장착된 타일이었다. 결과 및 고찰: 상기 제품에 대한 변환상수를 Monte Carlo N-Particle eXtended (MCNPX)를 이용하여 도출하였으며, 도출된 변환상수는 0.31-0.47의 범위에 분포하였다. 전처리 없이 가공제품 원형을 그대로 측정한 단순 측정 분석법의 경우 가공제품에 함유된 토륨계열의 방사능은 실제보다 약 2.8배까지 과대평가 되었다. 본 연구에서 개발한 간단/신속 분석법을 사용하는 경우에는 전처리를 통한 정밀분석법과 비교하여 그 차이가 3-24% 정도로 크게 줄어들었다. 결론: 본 연구에서 개발한 분석법은 향후 추가적인 가공제품의 재질 및 형태에 대한 변환상수의 개발을 통해 다양한 가공제품의 방사선학적 안정성 평가에 활용될 수 있을 것이다.

• 한국의학물리학회지:의학물리
• /
• 제28권3호
• /
• pp.77-82
• /
• 2017

We proposed the objective ROC analysis method based on the setting of threshold value for evaluation of single photon emission computed tomography (SPECT) image. This proposed ROC analysis method uses the quantification computational threshold value to each signal on the SPECT image. The SPECT images for this study were acquired by using Monte Carlo n-particle extended simulation code (MCNPX, Ver. 2.6.0, Los Alamos National Laboratory, USA). The basic SPECT detectors and specific water phantom were realized in the simulation, and we could get the simulation results by the simulation operation. We tried to analyze the reconstructed images using threshold value application based objective ROC method. We can get the accuracy information of reconstructed region in the image. This proposed ROC technique can be helpful when we have to evaluate the weak signal for the NM image. In this study, the proposed threshold value based computational ROC analysis method can provide better objectivity than the conventional ROC analysis method.

• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1259-1265
• /
• 2020

A beta ray scanner was proposed for in-situ discrimination of beta and gamma ray radioactivity. This scanner is based on the principle that gamma and beta rays experience different changes in detection efficiency in scintillators with different geometries, especially with regard to the scintillator thickness. The ratios of the counting rates of gamma rays (R_gamma), beta rays (R_beta), and sample measurements (R_total) in a thick scintillator to those in a thin one are reported. The parameter X_thick, which represents the counting rate contributed by beta rays to the total counting rate in the thick scintillator, was derived as a function of those ratios. The values of R_gamma and R_beta for ⁶⁰Co and ⁹⁰Sr sources were estimated as 3.2 ± 0.057 and 0.99 ± 0.0049, respectively. The estimated beta ray contributions had relative standard deviations of 2.05-4.96%. The estimated range of the beta rays emitted from ⁹⁰Sr was 19 mm as per the Monte Carlo N-Particle simulation, and this value was experimentally verified. Homogeneous and surface contaminations of ⁶⁰Co and ⁹⁰Sr-⁹⁰Y were simulated for application of the proposed method. The counting rate contributed by the beta rays was derived and found to be proportional to the concentration of ⁹⁰Sr-⁹⁰Y contamination.

• 한국건축시공학회지
• /
• 제20권2호
• /
• pp.129-135
• /
• 2020

핵 및 방사능전 상황에서 방사선에 의한 인명피해를 줄이기 위한 방안으로서 유개호에 자철석이 포함된 중량 콘크리트의 적용 가능성을 확인해보았다. 이에 본 연구에서는 자철광 콘크리트의 방사선 차폐효과를 분석하기 위하여 감마선원을 사용하여 차폐실험을 진행하였고 실험조건과 동일한 몬테칼로 모델링도 하였다. 그 결과 자철광의 함량이 증가할수록 감마선에 대한 차폐효과가 향상됨을 확인할 수 있었다. 향후 자철광 콘크리트가 군사적 목적의 시설물에 적용될 경우 방사선 차폐 측면에서 효과를 얻을 수 있을 것이라 기대한다.

• Nuclear Engineering and Technology
• /
• 제49권4호
• /
• pp.734-743
• /
• 2017

In order to investigate the swelling behavior and fuel-cladding interaction mechanism of U-10Zr alloy metallic fuel at very low burnup, an irradiation experiment was concisely designed and conducted on the China Mianyang Research Reactor. Two types of irradiation samples were designed for studying free swelling without restraint and the fuel-cladding interaction mechanism. A new bonding material, namely, pure aluminum powder, was used to fill the gap between the fuel slug and sample shell for reducing thermal resistance and allowing the expansion of the fuel slug. In this paper, the concise irradiation rig design is introduced, and the neutronic and thermal-hydraulic analyses, which were carried out mainly using MCNP (Monte Carlo N-Particle) and FLUENT codes, are presented. Out-of-pile tests were conducted prior to irradiation to verify the manufacturing quality and hydraulic performance of the rig. Nondestructive postirradiation examinations using cold neutron radiography technology were conducted to check fuel cladding integrity and swelling behavior. The results of the preliminary examinations confirmed the safety and effectiveness of the design.

• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.1-5
• /
• 2017

The heavy water zero power reactor (HWZPR), which is a critical assembly with a maximum power of 100 W, can be used in different lattice pitches. The last change of core configuration was from a lattice pitch of 18-20 cm. Based on regulations, prior to the first operation of the reactor, a new core was simulated with MCNP (Monte Carlo N-Particle)-4C and WIMS (Winfrith Improved Multigroup Scheme)-CITATON codes. To investigate the criticality of this core, the effective multiplication factor ($K_{eff}$) versus heavy water level, and the critical water level were calculated. Then, for safety considerations, the reactivity worth of $D_2O$, the reactivity worth of safety and control rods, and temperature reactivity coefficients for the fuel and the moderator, were calculated. The results show that the relevant criteria in the safety analysis report were satisfied in the new core. Therefore, with the permission of the reactor safety committee, the first criticality operation was conducted, and important physical parameters were measured experimentally. The results were compared with the corresponding values in the original core.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1289-1296
• /
• 2021

In this study, an electron-scattering device was fabricated to practically use the ultra-high dose rate electron beams for the FLASH preclinical research in Dongnam Institute of Radiological and Medical Sciences. The Dongnam Institute of Radiological and Medical Sciences has been involved in the investigation of linear accelerators for preclinical research and has recently implemented FLASH electron beams. To determine the geometry of the scattering device for the FLASH preclinical research with a 6-MeV linear accelerator, the Monte Carlo N-particle transport code was exploited. By employing the fabricated scattering device, the off-axis and depth dose distributions were measured with radiochromic films. The generated mean energy of electron beams via the scattering device was 4.3 MeV, and the symmetry and flatness of the off-axis dose distribution were 0.11% and 2.33%, respectively. Finally, the doses per pulse were obtained as a function of the source to surface distance (SSD); the measured dose per pulse varied from 4.0 to 0.2 Gy/pulse at an SSD range of 20-90 cm. At an SSD of 30 cm with a 100-Hz repetition rate, the dose rate was 180 Gy/s, which is sufficient for the preclinical FLASH studies.

• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.4137-4141
• /
• 2021

As NPPs continue to operate, liquid waste continues to be generated, and containers are needed to store and transport them at low cost and high capacity. To transport and store liquid phase very low-level radioactive waste (VLLW), a container is designed by considering related regulations. The design was constructed based on the existing container design, which easily transports and stores liquid waste. The radiation shielding calculation was performed according to the composition change of barium sulfate (BaSO₄) using the Monte Carlo N-Particle (MCNP) code. High-density polyethylene (HDPE) without mixing the additional BaSO₄, represented the maximum dose of 1.03 mSv/hr (<2 mSv/hr) and 0.048 mSv/hr (<0.1 mSv/hr) at the surface of the inner container and at 2 m away from the surface, respectively, for a 10 Bq/g of ⁶⁰Co source. It was confirmed that the dose from the inner container with the VLLW content satisfied the domestic dose standard both on the surface of the container and 2 m from the surface. Although it satisfies the dose standard without adding BaSO₄, a shielding material, the inner container was designed with BaSO₄ added to increase radiation safety.

• Journal of Radiation Protection and Research
• /
• 제48권4호
• /
• pp.184-196
• /
• 2023

Background: Radiation protection is crucial in various fields due to the harmful effects of radiation. Shielding is used to reduce radiation exposure, but gamma radiation poses challenges due to its high energy and penetration capabilities. Materials and Methods: This work investigates the radiation shielding properties of polyvinylidene fluoride (PVDF) samples containing different weight fraction of tungsten carbide (WC), tungsten trioxide (WO₃), and tungsten disulfide (WS₂). Parameters such as the mass attenuation coefficient (MAC), half-value layer (HVL), mean free path (MFP), effective atomic number (Z_eff), and macroscopic effective removal cross-section for fast neutrons (Σ_R) were calculated using the Phy-X/PSD software. EpiXS simulations were conducted for MAC validation. Results and Discussion: Increasing the weight fraction of the additives resulted in higher MAC values, indicating improved radiation shielding. PVDF-xWC showed the highest percentage increase in MAC values. MFP results indicated that PVDF-0.20WC has the lowest values, suggesting superior shielding properties compared to PVDF-0.20WO₃ and PVDF-0.20WS₂. PVDF-0.20WC also exhibited the highest Z_eff values, while PVDF-0.20WS₂ showed a slightly higher increase in Z_eff at energies of 0.662 and 1.333 MeV. PVDF-0.20WC has demonstrated the highest Σ_R value, indicating effective shielding against fast neutrons, while PVDF-0.20WS₂ had the lowest Σ_R value. The Monte Carlo N-Particle Transport version 5 (MCNP5) simulations showed that PVDF-xWC attenuates gamma radiation more than pure PVDF, significantly decreasing the dose equivalent rate. Conclusion: Overall, this research provides insights into the radiation shielding properties of PVDF mixtures, with PVDF-xWC showing the most promising results.

• Journal of Radiation Protection and Research
• /
• 제21권1호
• /
• pp.41-50
• /
• 1996

중성자 및 전자 그리고 광자 수송코드인 MCNP 4A코드를 이 용하여 ANSI N13.32에 제안된 말단팬텀과 한국원자력연구소 제작한 말단팬텀 각각에 대하여 감마선량당량환산인자를 커마근사법에 근거하여 계산하였다. 본 계산은 $15keV{\sim}1.5MeV$ 에너지영역에 대해 단일광자에너지 선원을 고려하였으며 이러한 단일광자에너지함수로서 계산한 공기커마에 대한 선량당량의 비로서 선량당량환산인자를 이론적으로 도출하였다. 본 연구에서 이론적 방법으로 도출한 ANSI와 KAERI의 말단팬텀 각각에 대한 광자선량당량환산인자를 ANSI N13.32의 실험적 방법에 의해 제시된 값들과 비교한 결과 50keV 이상의 단일 광자에너지영역에서는 실험적 방법에 의한 값들과 최대차이 5.7% 내에서 잘 일치함을 보였다. 그러나 40 keV 이하의 에너지영역에서는 본 연구의 계산 결과가 최대 13.6%까지 낮게 평가됨을 알 수 있었으며, 이러한 차이는 낮은 에너지영역에서 두드러지는 단일에너지의 생성과 관련된 실험의 불확실성과 MCNP코드에서 모사한 Geometry의 영향에 기인하는 것으로 사료된다.