• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.1
• /
• pp.83-92
• /
• 2001

In this paper, the monopulse channel receiver which can be matched between channels through a wide bandwidth has been proposed. The effects of the gain and phase imbalance between channels on the slope of monopulse error signal were analyzed. Also, the matching method between channels in a wide bandwidth was proposed, by which monopulse slope could be stabilized. Using the implemented monopulse radar system the monopulse slope was measured in the anechoic chamber which include the moving horn antenna and the target signal generator. The results show that the wide band matching method is useful and applicable to various channel receivers

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.3-9
• /
• 2015

In this paper, we propose the operation procedures of the 1-channel monopulse receiver which achieves the new configuration. Also, we analyzed the monopulse ratio and the target angle accuracy of the fabricated receiver by using the monopulse signal generator developed for verifying the proposal equipment. As a result, it is apparent that the monopulse ratio of the proposal receiver is equal to that of the 3-channel monopulse receiver. Also, the fabricated receiver exhibits the target angle accuracy with fewer than 0.1 RMS. The proposal receiver achieves the simple receiver configuration and the simple tracking procedures, as contrasted with the 3-channel monopulse receiver. Also, the proposal receiver has advantages in terms of size, weight, cost and power. Because the proposal monopulse receiver requires 1-channel receiver and needs not the signal processor in comparison with 3-channel monopulse receiver which requires 3-channel receiver and need the signal processor.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.7
• /
• pp.500-507
• /
• 2018

A three-channel radio frequency (RF) monopulse receiver using a data signal with a maximum transmission rate of 274 Mbps was designed. A monopulse receiver using a broadband communication signal was designed to operate in the Ku band, and it consists of a down-conversion module and a signal-processing module. To satisfy the performance of the proposed RF monopulse receiver, a signal-processing function less than the reception sensitivity for each transmission rate according to the adaptive transmission rate is required. To minimize signal reception and mutual frequency interference of various bandwidths, two RF filters were applied. To verify the satisfaction of system requirements, an AWR Corp. simulation tool was used.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.5
• /
• pp.582-589
• /
• 2016

Multi-mode monopulse system is widely used for satellite terminal like UAV because of high tracking accuracy and low size/weight profile. In order to calculate tracking error, Multi-mode monopulse system utilizes high-order mode signal, and it should have enough C/N(carrier to noise) level therefore tracking system needs narrow band filtering of received satellite beacon signal as much as possible. However, UAV suffers for beacon frequency drift derived from Doppler effect due to satellite figure 8 movement and UAV maneuvering. Therefore wideband signal processing needs to be considered in advance for exact doppler compensation and consequent time delay. In this paper, we propose the multi-stage Digital Signal processing system for beacon signal, which could minimize the signal delay under high Doppler and low C/N condition.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.71-76
• /
• 2014

In this paper, we proposed the 1-channel monopulse receiver which has the new configuration and described the operation procedures. Also, we compared and analyzed the proposal receiver and the general 3-channel monopulse receiver. As a result, it is apparent that the monopulse ratio of the proposal receiver is equal to that of the 3-channel monopulse receiver. The proposal receiver achieve the simple receiver configuration and the simple tracking procedures, as contrasted with the 3-channel monopulse receiver. Also, the proposal receiver has advantages in terms of size, weight, cost and power. Because the proposal monopulse receiver require 1-channel receiver and need not the signal processor in comparison with 3-channel monopulse receiver which require 3-channel receiver and need the signal processor.

• Journal of electromagnetic engineering and science
• /
• v.17 no.3
• /
• pp.120-125
• /
• 2017

A satellite communication (Satcom) antenna mounted on a moving platform provides a controlled heading that enables a geosynchronous satellite to communicate with the ground. A monopulse tracking method is effective for antenna control on a vehicle when it vibrates severely. However, this method has unexpected obstacles and its control performance is insufficient. To improve its control performance, the control command and monopulse error, the signal delay, and the radome effect are evaluated through tests. The authors then propose a method to transform the antenna error from 3D coordinates to 2D antenna coordinates. As a result, the antenna control performance is improved. As indicated in this study, examining antenna systems using the monopulse method on moving platforms is possible by understanding the antenna test process.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.2
• /
• pp.272-278
• /
• 2017

In this paper, we consider a single-channel amplitude comparison monopulse system(SCACMS). The monopulse ratio curve(MR-C) of the SCACMS can be controlled by an amplitude difference between sum and different signal, a phase difference and the coefficient of the signal processor. We first propose the SCACMS with multiple variables, and then apply a genetic algorithm to optimize the multiple variables in terms of minimizing a root mean square error. The simulation results show that when three variables of the SCACMS are jointly optimized, the linear region of the MR-C can be extended approximately 187 % compared to that of two variables.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.5
• /
• pp.35-43
• /
• 2014

In this paper, we propose a performance enhancement method of the target tracking system for communication signal using the monopulse and the ${\alpha}{\beta}$ filter to keep the connection of the communication system between the airplane and the ground. We suggest the minimum distance measurement method for tracking error angle of the monopulse signal instead of the generally used method of MR(Monopulse Ratio) curve, and the ${\alpha}{\beta}$ filter with variable gain for enhancement of the tracking accuracy and the probability of re-tracking the monopulse signal under the disconnection of link. We show the performance enhancement of the proposed method of monopulse system using the measured MR Curve results of the prototype system. And also, the comparison of simulation results between the ${\alpha}{\beta}$ filter with variable gain and the ${\alpha}{\beta}$ filter with fixed gain shows the performance enhancement of the proposed ${\alpha}{\beta}$ filter. Using the proposed methods, we expect the enhanced performance of the existing target tracking system for communication signal only by changing the algorithm without hardware changes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.884-891
• /
• 2001

In this paper, We use Antipodal signal for data modulation of Ultra Wideband(UWB) system. This has maximum Euclidean distance and -1 or 0 of correlation values. With adapting this signal to M-ary that and time hopped pattern, We designed multiple access system. UWB Antipodal signal employes Gaussian monopulse and Rayleigh monopulse. Using these signals, we analysis and compare error probability, the number of user and data rate of the two systems under the AWGN.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.10
• /
• pp.900-908
• /
• 2016

In this paper, we have studied the tracking system with a single channel monopulse receiver that has a comparative advantage of costs, size, weight, and power consumption over the general 3-channel monopulse receivers. After the single channel monopulse system was composed of an antenna, a monopulse receiver, a servo unit, a RF signal processor unit and a power supply unit, we analyzed the basic tracking performance of the tracking error angle and the pointing loss. And we proved the tracking performance to a moving target in the outdoor environment. On the Analysis of the tracking test results, the single channel monopulse system shows a equal or higher performance over the general 3-channel monopulse system and also has advantages of the system implementation. Also, it is concluded that this study is useful to apply a single channel monopulse receiver with benefits of production price and miniaturization when the monopulse tracking systems will be developed in the future.