• 대한치과보철학회지
• /
• 제58권1호
• /
• pp.67-76
• /
• 2020

컴퓨터 지원 설계 제조 기술(CAD/CAM)의 발전에 따라, 완전한 디지털 워크플로우를 구현하기 위한 첫번째 단계인 구내스캐너의 중요성이 높아지기 시작했다. CAD/CAM 이중스캔 기술은 임시 수복물의 외형을 복제하여 최종 수복물에 반영하도록 하는 방법이다. 이 증례에서는 비심미적인 전치부, 중증도의 마모, 수직 고경의 감소를 보이는 67세 남성을 치관 연장술과 수직고경 회복을 동반한 완전구강회복을 통해 치료했다. 임시 수복물은 구내스캐너와 CAD/CAM 이중스캔을 이용해 제작되었다. 적응 기간 후, 최종 단일 구조 지르코니아 수복물을 CAD/CAM 이중스캔을 이용해 임시 수복물을 반영해 제작되었다.

• The Journal of Advanced Prosthodontics
• /
• 제10권5호
• /
• pp.381-387
• /
• 2018

PURPOSE. Cement-retained implant prostheses can lack proper retrievability during repair, and residual cement can cause peri-implantitis. The purpose of this in vitro study was to evaluate the influence of abutment height and convergence angle on the retrievability of cement-retained implant prostheses with lingual slots, known as retrievable cement-type slots (RCS). MATERIALS AND METHODS. We fabricated six types of titanium abutments (10 of each type) with two different heights (4 mm and 6 mm), three different convergence angles ($8^{\circ}$, $10^{\circ}$, and $12^{\circ}$), a sloped shoulder margin (0.6 mm depth), a rectangular shape ($6mm{\times}6.5mm$) with rounded edges, and a rectangular ledge ($2mm{\times}1mm$) for the RCS. One monolithic zirconia crown was fabricated for each abutment using a dental computer-aided design/computer-aided manufacturing system. The abutments and crowns were permanently cemented together with dual-curing resin cement, followed by 24 hours in demineralized water at room temperature. Using a custom-made device with a slot driver and torque gauge, we recorded the torque ($N{\cdot}cm$) required to remove the crowns. Statistical analysis was conducted using multiple regression analysis and Mann-Whitney U tests (${\alpha}=.05$). RESULTS. Removal torques significantly decreased as convergence angles increased. Multiple regression analysis showed no significant interaction between the abutment height and the convergence angle (Durbin-Watson ratio: 2.186). CONCLUSION. Within the limitations of this in vitro study, we suggest that the retrievability of cement-retained implant prostheses with RCS can be maintained by adjusting the abutment height and convergence angle, even when they are permanently cemented together.

• 구강회복응용과학지
• /
• 제32권3호
• /
• pp.224-231
• /
• 2016

과도한 치아의 마모는 치아의 병적 변화, 교합 불균형, 기능 및 심미적 문제를 일으키며 악관절과 근육의 문제를 일으킬 수 있는 수직고경의 감소를 야기할 수도 있다. 수직고경의 감소가 발생한 경우, 전악보철수복을 통해 수직고경을 회복시켜 주기 위해서는 정확한 진단이 중요하다. 본 증례는 59세 남성으로 전반적인 치아의 마모와 파절로 인한 수직고경의 감소 및 비심미성을 해결하기 위해 전악 지르코니아 보철 수복을 시행하였다. 생리적 안정위, 견치간 거리 등을 분석하여 수직고경을 3 mm 거상하기로 하였고 전악 왁스업 후 임시치관을 제작하여 6개월동안 사용한 뒤 이를 이용하여 지르코니아 최종 보철을 완성하였다. 1년 6개월 경과 관찰하여 만족스러운 결과를 얻었기에 보고하는 바이다.

• The Journal of Advanced Prosthodontics
• /
• 제8권1호
• /
• pp.43-52
• /
• 2016

PURPOSE. This study was conducted to evaluate the effects of full-coverage all-ceramic zirconia, lithium disilicate glass-ceramic, leucite glass-ceramic, or stainless steel crowns on antagonistic primary tooth wear. MATERIALS AND METHODS. There were four study groups: the stainless steel (Steel) group, the leucite glass-ceramic (Leucite) group, the lithium disilicate glass-ceramic (Lithium) group, and the monolithic zirconia (Zirconia) group. Ten flat crown specimens were prepared per group; opposing teeth were prepared using primary canines. A wear test was conducted over 100,000 chewing cycles using a dual-axis chewing simulator and a 50 N masticating force, and wear losses of antagonistic teeth and restorative materials were calculated using a three-dimensional profiling system and an electronic scale, respectively. Statistical significance was determined using One-way ANOVA and Tukey's test (P<.05). RESULTS. The Leucite group ($2.670{\pm}1.471mm^3$) showed the greatest amount of antagonist tooth wear, followed by in decreasing order by the Lithium ($2.042{\pm}0.696mm^3$), Zirconia ($1.426{\pm}0.477mm^3$), and Steel groups ($0.397{\pm}0.192mm^3$). Mean volume losses in the Leucite and Lithium groups were significantly greater than in the Steel group (P<.05). No significant difference was observed between mean volume losses in the Zirconia and Steel groups (P>.05). CONCLUSION. Leucite glass-ceramic and lithium disilicate glass-ceramic cause more primary tooth wear than stainless steel or zirconia.