• 센서학회지
• /
• 제4권4호
• /
• pp.81-87
• /
• 1995

A novel biomaterial capable of incorporating biotinylated biomolecule has been synthesized. Our strategy is to biotinylate one-dimensional electroactive polymers and use a bridging streptavidin protein on Langmuir-Blodgett (LB) organized films. These copolymers are derivatized with long alkyl chains and biotin moieties to bind, respectively, to the hydrophobic surface and the biotinylated species, through the biotin and streptavidin complexation. We utilize the polymer assembly approach to attach a signal transducing biomolecule biotinylated phycoerythrin (B-PE) into this novel biomaterial by binding the unoccupied biotin binding sites on the bound streptavidin (4 sites total). The pressure-area isotherm of the protein injected monolayer showed area expansion. A characteristic fluorescent emission peak at 576nm was detected from the monolayer transferred onto a solid substrate. These observations demonstrated the promise of the organized thin polymer assemblies for their application to the sensor system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.305-308
• /
• 2002

Field emission from single-walled carbon nanotubes (SWNTs) aligned on a patterned gold surface is reported. The SWNTs emitters were prepared at room temperature by a self-assembly monolayer technique. SWNTs were cut into sub-micron length by sonication in an acidic solution. Cut SWNTs were attached on the gold surface by the reaction between the thiol groups and the gold surface. The field emission measurement showed that the turn-on field was 4.8 $V/{\mu}m$ at the emission current density of 10 ${\mu}A/cm^2$. The current density was 0.5 $mA/cm^2$ at 6.6 $V/{\mu}m$. This approach provides a novel route for fabricating CNT-based field emission displays.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.267.1-267.1
• /
• 2013

In modern science and technology, the organization of building blocks, such as spherical particles and zeolite, is important to form a nanostructure. So, it is essential to develop methods for organizing them into large scale for many precise applications. Up to now, reflux and stirring is widely used method for organization of colloidal particles. However, because this method is hard to organize building block with high coverage and uniform orientation, it is necessary to research another method. In this work, we synthesized spherical silica particles using St$\"{o}$ber method and organized them on the glass which is coated with 3-chloropropyltrimethoxysilane (CP-TMS) and polyethyleneimine (PEI) using Sonication method. Although spherical silica particles are difficult to attach on the glass due to their small attachment site, we improved this problem by coating PEI. We introduced two mode of reaction promotion, sonication (SO) and sonication with stacking between the bare glass (SS), and investigated degree of coverage (DOC) and degree of close packing (DCP).

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 춘계학술대회 논문집
• /
• pp.113-114
• /
• 2009

기존의 습식 및 건식 표면처리 공정의 단점을 극복하고, 마그네슘 합금의 가장 큰 문제점인 내식성개선을 위해 열화학기상증착(thermal Chemical Vapor Deposition)법을 이용하여 자기조직화 유기 단분자막(Self-Assembled organic Monolayer, SAM)을 제작하여 마그네슘 합금(AZ31)의 내식성을 검토하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2003년도 제25회 학술발표회 초록집
• /
• pp.90-90
• /
• 2003

• 한국진공학회지
• /
• 제15권2호
• /
• pp.145-151
• /
• 2006

p-iodo-phenyl octadecyl ether (I-POE)와 p-iodo-phenyl docosyl ether (I-PDE)의 분자의 흑연표면에서의 자기조립과 이 두 분자로 이루어진 혼합물의 자기조립을 주사 터널링 현미경을 이용하여 연구하였다. 각 분자 시스템은 흑연 표면에서 head-to-tail 배향의 안정된 단분자막으로 자기조립한다. 혼합물 시스템에서는 I-POE와 I-PDE 분자들은 표면에서 섞이지 않고, 고립된 단분자막 도메인을 형성한다. 특히 I-POE 분자는 흑연 표면에서 단분자막 구조를 우선적으로 형성하는데 이는 알킬 사슬 길이와 작용기를 가진 헤드 그룹의 효과에 기인한다.

• 한국재료학회지
• /
• 제19권8호
• /
• pp.437-442
• /
• 2009

This paper describes an improved strategy for controlling the adhesion force using both the antiadhesion and adhesion layers for a successful large-area transfer process. An MPTMS (3-mercaptopropyltrimethoxysilane) monolayer as an adhesion layer for Au/Pd thin films was deposited on Si substrates by vapor self assembly monolayer (VSAM) method. Contact angle, surface energy, film thickness, friction force, and roughness were considered for finding the optimized conditions. The sputtered Au/Pd ($\sim$17 nm) layer on the PDMS stamp without the anti-adhesion layer showed poor transfer results due to the high adhesion between sputtered Au/Pd and PDMS. In order to reduce the adhesion between Au/Pd and PDMS, an anti-adhesion monolayer was coated on the PDMS stamp using FOTS (perfluorooctyltrichlorosilane) after $O_2$ plasma treatment. The transfer process with the anti-adhesion layer gave good transfer results over a large area (20 mm $\times$ 20 mm) without pattern loss or distortion. To investigate the applied pressure effect, the PDMS stamp was sandwiched after 90$^{\circ}$ rotation on the MPTMS-coated patterned Si substrate with 1-${\mu}m$ depth. The sputtered Au/Pd was transferred onto the contact area, making square metal patterns on the top of the patterned Si structures. Applying low pressure helped to remove voids and to make conformal contact; however, high pressure yielded irregular transfer results due to PDMS stamp deformation. One of key parameters to success of this transfer process is the controllability of the adhesion force between the stamp and the target substrate. This technique offers high reliability during the transfer process, which suggests a potential building method for future functional structures.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2281-2284
• /
• 2014

Polystyrene beads (PS beads) with narrow size distribution were synthesized, and their diameter was controlled from 1.2 to $5{\mu}m$ by varying the injection rate of a styrene solution containing initiator and the concentration of reactant, such as initiator and capping material. The diameter of the PS beads increased with increasing in the injection rates and the initiator concentration or decreasing the capping material concentration. Then, we used the PS beads as building block, and organized them into a hexagonally close-packed monolayer on substrate with template-assisted manual assembly. We showed perfect hexagonally close-packed organization of the PS beads with various sizes in large-scale area. And we demonstrated the superiority of the dry manual assembly over the wet self-assembly in terms of simplicity, speed, perfect ordering, and large scale.

• Journal of Ceramic Processing Research
• /
• 제19권6호
• /
• pp.525-529
• /
• 2018

The antireflective (AR) coated poly methyl methacrylate (PMMA) substrate was deposited by atomic layer deposition (ALD) on a self-assembled monolayer (SAM) to improve hydrophobicity and mechano-chemical properties of organic thin films. The water contact angles (WCA) were tested to characterize the surface wettability of SAM octadecyltrichlorosilane (OTS) films. Results showed that a contact angle of $105.9^{\circ}$ was obtained for the SAM films with an annealing process, and the highest WCA of $120^{\circ}$ was achieved for the films prepared by the SAM and ALD multi-process. The surface morphology of the SAM films with different assembly times and varying number of ALD cycles was obtained by atomic force microscopy (AFM). The maximum light transmittance for the SAM films on the PMMA substrate reached 99.9% at a wavelength of 450 nm. It was found that the SAM surfaces were not affected at all by the ALD process.

• 한국세라믹학회지
• /
• 제39권10호
• /
• pp.981-987
• /
• 2002

$St\"{o}ber$ process를 이용하여 단분산 콜로이드 실리카를 제조하였다. 초기물질인 TEOS(Tetraethylorthosilicate)와 $NH_4OH$, 에탄올 및 증류수의 함유량을 조절하여 100 nm급, 200 nm급, 300 nm급 크기의 단분산 실리카 입자를 제조할 수 있었고, 제조된 실리카 입자는 Scanning Electron Microscope(SEM) 및 laser scattering particle analyzer를 통해 관찰하였다. Dipcoating 공정을 이용하여 제조된 300 nm 크기의 콜로이드 실리카의 자기 배열성(self-assembly) 형성에 관한 연구를 진행하였다. 다양한 코팅 공정 변수(표면장력, 표면전하, 입자의 함유량)의 조절을 통하여 dip coating시에 자기 배열성 단층막(monolayer)을 형성해 낼 수 있는 조건을 최적화하였고, SEM으로 관찰해 본 결과, 최적 조건 상태에서 비교적 넓은 영역 (1.5 mm ${\times}$ 1.5 mm)에서 hexagonally ordered packing된 콜로이드 입자 결정 단층막을 얻을 수 있었다.