• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.3
• /
• pp.218-226
• /
• 2013

The objective of this study is to estimate the optimal net twine thickness of drift net for yellow croaker. The filed experiments of the fishing performance were conducted with three kinds of drift net with different monofilament diameters (No.3=0.284mm, No.4=0.330mm, No.5=0.370mm) the total eight times in the southwest coastal sea of Korea. And the physical properties tests on the monofilaments of experimental net were carried out to estimated breaking load and softness in dry and wet conditions, respectively. From the results, the No.3 mono. was the strongest break load per unit area in dry and wet conditions. And the softness showed that the No. 3 mono. was the most soft than another experimental monofilaments. The fishing performance was; the No. 3 drift net showed the most catches. Conversely, the catches of No. 4 and No. 5 drift net showed the half on the catches of No. 3 drift net. Consequently, the diameter of monofilament in the drift net for yellow croaker should carefully choose to consider the economic sides such as the amount of catches and the cost of catches.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.4
• /
• pp.265-272
• /
• 2008

Biodegradable polybutylene succinate(PBS) is an environment friendly plastics for fisheries, because it can mitigate the ghost fishing problem caused by gill-net and trap fisheries. To evaluate photodegradability of PBS monofilament in comparison with polyamide(PA) and polyethylene(PE) monofilament, these 3 types of monofilaments were spun and exposed to ultraviolet light(UV) of weather-ometer for 900 hours, and then their modification, crystal structure, strength, and extensibility were analysed. PBS monofilament did not show any crack and maintained its crystal structure after 900 hour exposure to UV whereas PE monofilament began showing cracks and structure modification after 600 hour exposure. Under UV exposure, the strength and extensibility decreased more rapidly in PBS than in PA and PE. We estimate that gill nets made of PBS monofilament can endure for about 1 year. The breaking strength and elongation decreased linearly with the exposure time for the 3 types of monofilaments. The derived regression equations of the residual tenacity(RT, kg/$mm^2$) and the residual extensibility(RE, %) with the exposure time in year(Y) for each monofilament were; PBS : RT=48.598 - 8.6437Y($R^2=0.93$), RE=28.165 - 7.3233Y($R^2=0.98$), P A : RT=59.771 - 8.6437Y($R^2=0.98$), RE=32.198 - 5.2772Y($R^2=0.92$), P E : RT=60.898 - 5.6528Y($R^2=0.98$), RE=11.887 - 0.7188Y($R^2=0.98$).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.1
• /
• pp.94-101
• /
• 2015

The heat treatment machine based on immersion was developed to reduce temperature difference during netting process and appraised it performance compared current heat treatment machine using high pressure. It was also reviewed the optimum heat treatment procedures for PBSAT monofilament net in accordance with the immersion time and temperature. The procedure was based on physical measurement such as breaking load, elongation and angle of the mesh for PBSAT monofilament. The water temperature gap of the treatment machine based on immersion was less than $1^{\circ}C$. and the energy consumption was also increased in high temperature condition. It was identified that the optimum temperature was $75^{\circ}C$ and its optimum processing time was between 15 minutes and 20 minutes to get qualified physical properties.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.4
• /
• pp.281-290
• /
• 2007

This study was aimed not only to develop the gill net and trap made of biodegradable monofilaments in order to prevent a ghost fishing and to protect marine ecosystem, but also to analyze their spinning process and physical properties. Results showed that the spinning speed of biodegradable polybutylene succinate(PBS) monofilament was estimated to be approximately 100m/min when spinning temperature and cooling water temperature were adjusted at $180^{\circ}C$ and $3^{\circ}C$, respectively. The breaking loads of PBS monofilaments were estimated to be $35.3kg/mm^2$ at ${\phi}0.2mm$, $46.5kg/mm^2$ at ${\phi}0.3mm$, and $49.7kg/mm^2$ at ${\phi}0.4mm$ in the dry condition, respectively. However, its breaking loads in the wet condition were reduced by 2.4-5.5%, compared to those in the dry condition. The knotted strength of PBS monofilament at ${\phi}0.2mm$ was estimated to be 98.6% of PE in the dry condition. The breaking load of PBS monofilament at ${\phi}0.3mm$ was evaluated to be 81.8% of PA, and its softness showed 3 times less than that of PA in the wet condition. The breaking load of PBS monofilament at ${\phi}0.4mm$ was 95.3% of PA, and its softness showed 1.6 times less than that of PA in the wet state. However, the load elastic elongations of two kinds of monofilaments were estimated to be 1% higher than that of PA.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.4
• /
• pp.301-309
• /
• 2012

A net-assembling company for gill net fishing gears makes a design based on the size of nets provided and determines floats, types of weights, and numbers. In addition, through the accurate examination of net weights in the process of fishing gear designing, it can prevent an excessive use of designing costs. The weight of twine can be easily calculated by its thickness differences, but the weight of netting has errors to be calibrated since the weight of netting is not changing exponentially with the changes of number and size of meshes. This study aims to suggest and empirically analyze the methods for estimating the weights of netting in accordance with the changes of number, size and thickness of meshes for a sound management of netting and net-assembling companies. Results indicated that the method using the knots and legs of netting was not practically usable because the errors were increased as the number of mesh increased. However, the method using netting area shown its usage potentiality with the calibration of the increasing ratio of mesh numbers.

• Fisheries and Aquatic Sciences
• /
• v.14 no.2
• /
• pp.130-137
• /
• 2011

Visual stimuli of nets, which affect fishing selectivity, vary by twine diameter, color, and material under different light conditions and visual geometries. In this study, two cylindrical model codends of two mesh sizes, 28 and 43 mm, were made of high-contrast, dark brown polyethylene (PE) netting twine and low contrast, light-blue polyamid (PA) monofilament twine. Each model codend was filled with juvenile seabream and set in the water channel of a light-blue circular tank under a flow speed 0.8 m/s for 30 min. Light conditions were set to relatively bright, dim, and dark. The resulting retention rates of juvenile seabream were 15-35% lower for the low-contrast codend with PA monofilament than for the high contrast PE twine netting under bright and dim light conditions, while no difference was observed under dark conditions. The effects of mesh size and netting contrast on the retention rate were dependent on the light level, while the retention rate due to netting contrast was independent of mesh size. Therefore, low-contrast nets in the codend could help to reduce juvenile bycatch by disturbing the orderly optomotor response.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.4
• /
• pp.317-326
• /
• 2017

Comparative fishing experiments were conducted in the eastern coastal waters near Uljin, Korea from 2002 to 2004, using the experimental trammel nets to estimate the selectivity for spinyhead sculpin Dasycottus setiger. The inner panels of the nets were made of nylon monofilament with four mesh sizes (82.2, 89.4, 104.8, and 120.2 mm) while its two outer panels were made of twisted nylon multifilament with a mesh size of 510 mm. The SELECT (Share Each Length's Catch Total) procedure with maximum likelihood method was applied to obtain a master selection curve. The different functional models (normal, lognormal, bi-normal, and logistic model) were fitted to the catch data. The lognormal model with the fixed relative fishing intensity was chosen as the best-fitted selection curve through comparison of model deviance and AIC (Akaike's Information Criterion). The optimum relative length (the ratio of fish total length to mesh size) with the maximum relative efficiency was obtained as 2.492.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.2
• /
• pp.97-106
• /
• 2018

The objective of this study was to estimate physical properties and fishing performances of net twine with improved PBS copolymer resin (Bio-new), the existing PBS/PBAT blending resin (Bio-old) and commercial Nylon (Nylon). The tensile strength of Bio-new monofilament was equal to Bio-old and the elongation of Bio-new was about 6 % higher than that of Bio-old in wet condition. The physical properties tests were carried out to estimate breaking load and stiffness in dry and wet conditions, respectively. In the results, the breaking load of Nylon netting was the highest whereas the elongation of Bio-new was 1.4 times higher than that of Nylon netting in wet condition. The breaking load of Bio-old netting was about 9.2 % higher than that of Bio-new netting. However, the elongation of the Bio-new netting was about 3% higher than that of Bio-old. The stiffness of the Bio-new compared to Bio-old was improved about 34 % in dry condition and about 32 % in wet condition. The filed experiments of the fishing performance were conducted with three kinds of drift nets with different netting materials in the coastal sea of Jeju. The each experimental drift net made of different materials showed the similar fishing performance. Bio-old drift net yielded less catches of small sized yellow croaker than other drift nets. The netting materials affected the fishing performance and length distribution of catches in the drift nets.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.4
• /
• pp.281-289
• /
• 2016

Spinyhead sculpin Dasycottus setiger, a species of cold water fish, is distributed along the eastern coastal waters of Korea. A series of fishing experiments was carried out in the waters near Uljin from June, 2002 to November, 2004, using the experimental monofilament gill nets of different mesh sizes (82.2, 89.4, 104.8, and 120.2 mm) to describe the selectivity of the gill net for the fish. The SELECT (Share Each Length's Catch Total) analysis with maximum likelihood method was applied to fit the different functional models (normal, lognormal, and bi-normal models) for selection curves to the catch data. The bi-normal model with the fixed relative fishing intensity was selected as the best-fit selection curve by AIC (Akaike's Information Criterion) comparison. For the best-fit selection curve, the optimum relative length (the ratio of fish total length to mesh size) with the maximum efficiency and the selection range ($R_{50%,large}-R_{50%,small}$) of 50% retention were obtained as 2.363 and 0.851, respectively. The ratios of body girth to mesh perimeter at 100% retention where the selection curve of each mesh size represented the optimum total length were calculated as the range of 0.86 ~ 0.87.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.3
• /
• pp.274-283
• /
• 2014

Swelling of the heat-treated netting for gillnet was estimated through the netting height in square acrylic tank. Experimental Nylon netting and PBSAT netting were heat-treated by using the high-degree vacuum method in hot water after net making. Heat-treatment temperatures were conducted with Nylon netting $105^{\circ}C$ and PBSAT netting $62^{\circ}C$, $65^{\circ}C$, $66^{\circ}C$, $67^{\circ}C$. The swelling measurement method of a netting using the square tank was capable of the reduction measurement errors comparing with measurement methods of a mesh inner angle and the shortening rate of a mesh size. In addition, this method was available to comparison evaluation for each netting more easily. Wet type heat-treatment apparatus with high-degree vacuum was shown higher $7{\sim}8^{\circ}C$ inner side temperature than a setting temperature. The tensile strength and elongation of Nylon netting and PBSAT netting were shown higher wet condition than dry condition. The tensile strengths of PBSAT monofilaments in dry and wet condition were sharply decreased at heat-treatment temp. $75^{\circ}C$ than heat-treatment temp. $74^{\circ}C$.