• 한국농공학회지
• /
• 제44권4호
• /
• pp.123-128
• /
• 2002

This study was performed to use fiber mixed soil which has clayey soil or sandy soil with fibrillated fiber or monofilament fiber on purpose of construction materials, filling materials, and back filling materials. In addition, this study was conducted to analyze strength properties and fiber reinforcing effect with fiber mixed soil by direct-shear test. In case of fibrillated fiber mixed soil, the more quantity of fiber was in both cohesive soil and sandy soil, the larger shear stress was in respective step of normal load. The respective mixed soil at 0.5% and 0.1% mixing ratio of monofilament fiber mixed soil showed maximum shear stress. According to unconfined compression or direct-shear test, making specimen of the monofilament fiber mixed soil, it is required to be careful and stable mixing method, while it is expected that monofilament fiber mixed soil doesn't increase strength.

• 한국세라믹학회지
• /
• 제27권8호
• /
• pp.1043-1049
• /
• 1990

In this work, strength of ceramic fibers and monofilament composites were evaluated on the basis of Weibull's theory. The fibers used were β-SiC and γ-Al2O3 monofilament composites was fabricated by coating Al on the fiber surface by the use of vacuum evaporation method. Average tensile strength of ceramic fibers showed the tendency to linearly decrease with increasing gauge length. Also, Weibull moduli of ceramic fibers were decreased with increasing gauge length, Weibull modulus of β-SiC was 3.5 for 6-50mm, 2.8 for 100-200mm. Weibull modulus of γ-Al2O3 was 6.5 for 20-50mm, 6 for 100mm. Fibers in monofilament retained their original as-produced strength to exposure temperature of 400℃. However, tensile strength of both monofilament composites approved to remarkably degrade due to interfacial reaction-induced flaws on the fiber surface after thermal exposure of 600℃. In this case, Weibull modulus of monofilament composites was 2.7 for β-SiC and 5.2 for γ-Al2O3 respectively.

• 한국농공학회지
• /
• 제44권6호
• /
• pp.115-123
• /
• 2002

This study was performed to provide basic data for development and construction of reinforced soil wall that mixed with reinforcements such as calcium carbonate, monofilament fiber. In order to determine proper moisture content and mixing ratio by weight of reinforcement, Poisson's ratio and compressive strength tests for sandy soil had been conducted. Model tests for long-term behavior of reinforced soil wall were carried out to investigate the effect of reinforcement during loads and under static loads. The results of creep and model tests for sandy soil compared with clayey soil. Reinforced sandy soil mixed with calcium carbonate and cement showed brittle rupture by shear but that of mixed with monofilament fiber showed ductile rupture due to the tension force of fiber. It was shown that when age increased, creep strain of reinforced soil under sustained load approached constant values.

• 한국해양공학회지
• /
• 제22권4호
• /
• pp.51-58
• /
• 2008

The objective of this study was to investigate the mechanical characteristics of fiber-reinforced lightweight soil using waste fishing net or monofilament for recycling both dredged soils and bottom ash. Reinforced lightweight soil consists of dredged soil, cement, air foam, and bottom ash. Waste fishing net or monoiament was added the mixture in order to increase the shear strength of the lightweight soil. Test specimens were fabricated with various mixing conditions, including waste fishing net content and monofilament content. Several series of unconfined compression tests and direct shear tests were carried out. From the experimental results, it was found that the unconfined compressive strength, as well as the stress-strain behavior of reinforced lightweight soil was strongly influenced by mixing conditions. In this study, the maximum increase in shear strength was obtained with either a 0.5% content of monofilament or 0.25% waste fishing net. The unconfined compressive strength of reinforced lightweight soil with monofilament was greater than that of reinforced lightweight soil with waste fishing net.

• 한국안전학회지
• /
• 제12권4호
• /
• pp.230-240
• /
• 1997

본 연구에서는 폴리프로필렌 섬유보강 콘크리트의 파괴특성을 알아보기 위해 Monofilament 섬유와 Fibrillated 섬유의 두 종류 폴리프로필렌 섬유를 선택하여 10$\times$10$\times$50 cm 보 시편을 만들었는데, 이때 사용된 두 종류의 섬유 길이는 19 mm이고, 섬유 혼입량은 0%, 1%, 2%, 3%로 하였으며, 초기균열 깊이의 영향을 알아보기 위해 초기 균열길이를 각 섬유 혼입량에 따라 1.5cm, 3.0cm, 4.5cm로 하여 실험을 수행하였다. 또한, 본 연구에서는 폴리프로필렌 섬유보강 콘크리트의 파괴특성을 규명하기 위해 보 시편에 대한 4 점 하중 휨시험을 통해 하중-하중점 변위 곡선을 각 시편에 대해 측정하였고, 이때 COD 게이지를 이용하여 하중-CMOD 곡선도 측정할 수 있었다. 이러한 실험결과를 통해, 섬유혼입량과 초기 균열 깊이에 따른 압축강도, 휨강도 및 휨인성, 응력확대계수, 파괴에너지 등이 규명되었다. 이러한 결과에 대한 분석으로부터 Fibrillated 폴리프로필렌 섬유가 Monofilament 섬유보다 연성 효과가 큰 것을 알 수 있었으며, 특히 하중-CMOD 곡선으로부터 계산되는 파괴에너지인 Jc가 믿을만한 파괴특성 인자임을 알 수 있었다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1992년도 제2차 학술발표초록집
• /
• pp.78-79
• /
• 1992

• Steel and Composite Structures
• /
• 제22권1호
• /
• pp.13-24
• /
• 2016

In the present paper, glass fibers are substituted partially with monofilament fishnet and polyester matrix for making the composites. The composite specimens were prepared in accordance with ASTM for analyzing the flexural strength and dynamic mechanical properties. Furthermore, machinability revealed the interaction of glass fiber and partial substituted monofilament fishnet fiber with the matrix. Fiber pullouts on the fractured specimen during the physical testing of the composites are also investigated by COSLAB microscope. The results reveal that the fishnet based composites have appreciably higher flexural properties. Furthermore, the glass fiber, woven roving and fishnet composite has more storage modulus and significant mechanical damping. The composite specimens were fabricated by hand lay-up method. Hence, these composites are the possible applications to develop the value added products. The results of this study are presented.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2000년도 봄 한국섬유공학회 학술발표회 논문집(Proceedings of the Korean Textile Conference)
• /
• pp.141-144
• /
• 2000

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2000년도 봄 한국섬유공학회 학술발표회 논문집(Proceedings of the Korean Textile Conference)
• /
• pp.343-346
• /
• 2000

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.189-193
• /
• 1999

Glass fiber의 국내ㆍ외 현황은 최종 용도에 따라 여러 가지 유리섬유를 선별, 적절히 그의 물성을 이용하는데 있으며 아울러 꾸준히 이용도를 넓히고 개척하는데 있다고 할 수 있다. 따라서 유리섬유의 종류도 최고 10여가지가 개발되어 사용하고 있는데 국내는 아직 E-glass fiber만 생산하고 있는 실정이다. 이런 이유는 여러 가지가 있겠지만 시장성 및 활용도가 외국에 미치지 못해 섬유 종류의 다변화가 요구되지 못하며 방사기술의 낙후성도 문제가 있지 않나 추론하고 있다. 특히 spinning system 차이로 인해 현재는 multi-PCB용 유리섬유는 전량 수입하고 있는 실정이다. (중략)