• Resources Recycling
• /
• v.18 no.3
• /
• pp.62-68
• /
• 2009

Continuous operation for 24h was carried out to establish the optimum condition at the magnesium fused salt electrolysis using a self made 150 ampere mono-polar type cell. An electrolyte composition of $MgCl_2$ 25%, NaCl 55%, $CaCl_2$ 19%, $CaF_2$ 1% was electrolyzed with applied voltage 7V, cathode current density $0.7-0.75A/cm^2$, electrode distance 6cm at $720{\sim}740^{\circ}C$ for 24 hours. Changes of applied current, composition of the electrolyte, current efficiency were investigated. Through the experiments, there were not any operating troubles with the self-made electrolytic cell. Purity of the electrolyzed magnesium metal was above 99%, and 89% of current efficiency was achieved. Some basic data for scale-up of the magnesium electrolysis equipment which would be necessary for commercialization were obtained.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.85-87
• /
• 1998

In the industrial field, the necessity for the linear motion is increasing. Because of the motion converting mechanism there exist many losses. So the application of linear machines instead of rotating machines is increasing. As compared with a mono-polar type linear DC motor, it is possible for a multi-polar type linear BC motor to have a longer stroke and more thrust with thin shape. However, there are thrust ripple on multi-polar type one. In this paper, a design to multi-polarize of the linear DC motor is discussed. In order to make a smoother thrust on multi-polar type linear BC motor. a method is proposed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.599-602
• /
• 2005

This paper describes a experimental study determining the effects of the type and loudness of introducing sounds on the amenity and the masking degree of background noise. 132 relative test sounds with 11 types of introducing sounds and 3 steps of road traffic noise were presented to 29 subjects through headphone in the laboratory experiment. Seven scale of polar adjective such as 'Strong Weak', 'Pleasant Unpleasant', 'Clear Unclear', 'Suitable Unsuitable', 'Comfortable-Discomfortable' was employed for the evaluation of amenity. And Seven scale of mono polar adjective such as 'Very-Not at all' was employed for the evaluation of masking degree against road traffic noise. The results are as follows; Green music was evaluated the highest amenity among test sounds and murmurs of a stream, signal music, song of a bird, crying of insect was showed the amenity rank of order. The softer and weaker introducing sound was evaluated more suitable and comfortable under the road traffic noise. So adequate level of introducing sounds was considered for the desirable urban soundscape. Also the louder sounds compared to background noises had greater masking effects. But similar levels of introducing sounds were recommended considering both good amenity and masking effects.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.384-385
• /
• 2005

Monolayers of lipids on a water surface have attracted much interest as models of biological membranes, but also as precursors of multilayer systems promising many technical applications. Until now, many methodologies have been developed in order to gain a better understanding of the relationship between the structure and function of the monolayers. Maxwell displacement current (MDC) measurement has been employed to study the dielectric property of Langmuir-films. MDC flowing across monolayers is analyzed using a rod-like molecular model. It is revealed that the dielectric relaxation time $\tau$ of mono layers in the isotropic polar orientational phase is determined using a liner relationship between the monolayer compression speed a and the molecular area $A_m$. Compression speed a was about 30, 40, 50mm/min. also, LB layers of Arachidic acid deposited by LB method were deposited onto slide glass as Y-type film. The structure of manufactured device is Au/Arachidic acid/Al, the number of accumulated layers are 9 ~ 21 and we then examined of the Metal-Insulator-Metal(MIM) device by means of I-V.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.1
• /
• pp.82-91
• /
• 2021

This study was conducted to investigate the effect of initial pH, current density, and electrolysis time on process performance in terms of decolorization and chemical oxygen demand (COD) removal from disperse dyebath wastewater (DDW) by mono-polar parallel laboratory scale electrocoagulation (EC) process. COD reduction of 51.3% and decolorization of 92.8% were obtained with operating cost of 0.19 €/㎥ treated wastewater for Al-Al electrode pair, while 90.5% of decolorization and 49.2% of COD reduction were obtained with operating cost of 0.20 €/㎥ treated wastewater for an Fe-Fe electrode pair. The amount of sludge production were highly related to type of the electrode materials. At the optimum conditions, the amount of sludge produced were 0.18 kg/㎥ and 0.28 kg/㎥ for Al-Al and Fe-Fe electrode pairs, respectively. High decolorization can be explained by the hydrophobic nature of the disperse dye, while limited COD removal was observed due to the high dissolved organic matter of the DDW based on auxiliary chemicals. Energy, electrode, and chemical consumptions and sludge handling were considered as major cost items to find a cost-effective and sustainable solution for EC. The contribution of each cost items on operating cost were determined as 10.0%, 51.1%, 30.5% and 8.4% for Al-Al, and they were also determined as 9.0%, 38.0%, 40.5% and 12.5% for Fe-Fe, respectively. COD reduction and decolorization were fitted to first-order kinetic rule.