• 제목/요약/키워드: Mono-Pulse Ratio

검색결과 5건 처리시간 0.02초

모노펄스 급전 구조를 갖는 Ka 대역 우회선 원편파 마이크로스트립 패치 배열 안테나 설계 및 제작 (Design and Fabrication of Right Hand Circular Polarization Microstrip Patch Array Antenna for Ka Band with Mono-Pulse Feed)

  • 배기형
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
    • /
    • pp.297-302
    • /
    • 2005
  • Right hand circularly polarized Ka band microstrip patch array antenna was designed, manufacture and measurement were carried out. In order to lower axial ratio performance sequential rotation array technique was used. With mono-pulse feed There are sum and delta channel. Waveguide to microstrip transition was used. The 512 array antenna was performed which axial ratio is about 1.ldB in the half power beam width and also 1.ldB at the normal direction. Directivity gain of designed antenna is 32dB.

  • PDF

항공용 안테나 하이브리드 모노펄스 레이다 시스템의 실용적 표적 방위각 추정 방법 (Practical Method to Extract Azimuth Angle of Target for Air-Borne Antenna Hybrid Mono-Pulse Radar System)

  • 김진우;윤재혁;노수현;이종은;전영범;옥재우;유응노;윤상호;신현익
    • 한국전자파학회논문지
    • /
    • 제29권9호
    • /
    • pp.735-738
    • /
    • 2018
  • 항공용 안테나 하이브리드 모노펄스 레이다 시스템을 이용하여 지상 이동표적 탐지 시, 표적의 방위각 정확도는 시스템 내 채널 간 위상 불균형에 따른 모노펄스 기울기 추정 정확도에 지배적으로 영향을 받는다. 본 논문에서는 안테나와 180도 하이브리드의 물리적 길이 차이에 의한 위상 불균형을 효과적으로 보상할 수 있는 방법을 제안 하였다. 비행시험을 통하여 제안된 방법의 성능을 검증한 결과, 보상 전보다 유의한 성능개선 효과를 확인할 수 있었다.

Rapid-Thermal Pulse 화학증착법에 의해 증착된 그래핀 박막에서 촉매금속 Ni의 두께 및 열처리 조건의 영향 (Effect of the Thickness and the Annealing Conditions of the Catalytic Ni Films on the Graphene Films Grown by a Rapid-Thermal Pulse CVD)

  • 나신혜;윤순길
    • 한국재료학회지
    • /
    • 제21권2호
    • /
    • pp.78-82
    • /
    • 2011
  • Mono- and few-layer graphenes were grown on Ni thin films by rapid-thermal pulse chemical vapor deposition technique. In the growth steps, the exposure step for 60 s in $H_2$ (a flow rate of 10 sccm (standard cubic centimeters per minute)) atmosphere after graphene growth was specially established to improve the quality of the graphenes. The graphene films grown by exposure alone without $H_2$ showed an intensity ratio of $I_G/I_{2D}$ = 0.47, compared with a value of 0.38 in the films grown by exposure in H2 ambient. The quality of the graphenes can be improved by exposure for 60 s in $H_2$ ambient after the growth of the graphene films. The physical properties of the graphene films were investigated for the graphene films grown on various Ni film thicknesses and on 260-nm thick Ni films annealed at 500 and $700^{\circ}C$. The graphene films grown on 260-nm thick Ni films at $900^{\circ}C$ showed the lowest $I_G/I_{2D}$ ratio, resulting in the fewest layers. The graphene films grown on Ni films annealed at $700^{\circ}C$ for 2 h showed a decrease of the number of layers. The graphene films were dependent on the thickness and the grain size of the Ni films.

Improved Current Source Design to Measure Induced Magnetic Flux Density Distributions in MREIT

  • Oh Tong-In;Cho Young;Hwang Yeon-Kyung;Oh Suk-Hoon;Woo Eung-Je;Lee Soo-Yeol
    • 대한의용생체공학회:의공학회지
    • /
    • 제27권1호
    • /
    • pp.30-37
    • /
    • 2006
  • Injecting currents into an electrically conducting subject, we may measure the induced magnetic flux density distributions using an MRI scanner. The measured data are utilized to reconstruct cross-sectional images of internal conductivity and current density distributions in Magnetic Resonance Electrical Impedance Tomography (MREIT). Injection currents are usually provided in a form of mono-polar or bi-polar pulses synchronized with an MR pulse sequence. Given an MRI scanner performing the MR phase imaging to extract the induced magnetic flux density data, the current source becomes one of the key parts determining the signal-to-noise ratio (SNR) of the measured data. Since this SNR is crucial in determining the quality of reconstructed MREIT images, special care must be given in the design and implementation of the current source. This paper describes a current source design for MREIT with features including interleaved current injection, arbitrary current waveform, electrode switching to discharge any stored charge from previous current injections, optical isolation from an MR spectrometer and PC, precise current injection timing control synchronized with any MR pulse sequence, and versatile PC control program. The performance of the current source was verified using a 3T MRI scanner and saline phantoms.

합/차/부엽 억제 채널을 갖는 모노펄스 보조 감시 레이더(용) 안테나 (Monopulse Secondary Surveillance Radar Antenna with Sum/Difference/SLS Channels)

  • 최종환;채희덕;박종국;나형기
    • 한국전자파학회논문지
    • /
    • 제22권7호
    • /
    • pp.720-728
    • /
    • 2011
  • 본 논문에서는 레이더 표적의 피아 식별을 위해 일반적으로 사용되는 모노펄스 보조 감시 레이더용 안테나의 개발 방안 및 결과를 제시하였다. 개발된 안테나는 수동 선형 배열 안테나로서 횡급전기와 다수의 배열 소자로 구성된다. 횡급전기는 포트별로 전력 및 위상비가 최적화된 합, 차 및 부엽 억제 채널을 제공하며, 19개의 배열 소자와 1개의 후방 배열 소자와 연결되어 방위각 방향으로 빔 패턴을 형성한다. 합 채널 빔 패턴의 방위각 최대 부엽 수준은 -20 dBc 이하이며, 부엽 억제 채널 빔 패턴은 합 채널 빔 패턴의 주 빔 이외의 전 영역에서 부엽을 덮도록 한다. 그리고 차 채널 빔 패턴은 방위각 방향의 탐지 정확도를 높이기 위한 모노펄스 기능에 사용된다. 한편, 배열 소자는 고각 방향으로 성형 빔(shaped-beam)을 형성하여 지면으로부터의 강한 클러터 영향 및 다중경로 효과를 억제할 수 있도록 하였다. 개발된 안테나는 산란계수 측정 및 원전계 빔 패턴 시험을 통해 주어진 개발 규격을 모두 잘 만족하는 것을 확인하였다.