• Asian Pacific Journal of Cancer Prevention
• /
• 제14권12호
• /
• pp.7193-7196
• /
• 2013

Ovarian cancer patients need a surveillance program for the detection of tumor progression after completion of treatment. The methods generally consist of history taking, physical examination, tumor marker monitoring and imaging. However, the details of recurrence detection with each method are not well defined. To clarify this issue, ovarian cancer patients who achieved complete or partial responses and developed tumor progression at the follow up time between January 2004 and December 2010 in University Hospital Chiang Mai, Thailand, were reviewed. Clinical data, CA 125 level and imaging results at the tumor progression time were recorded and analyzed. There were 144 ovarian cancer patients meeting the inclusion criteria with the mean age of 51 years and 62.5% of them were in an advanced stage. Complete response was achieved in 89 patients (61.8%) after primary treatment. The median progression free survival and overall survival were 15.5 months and 37.5 months, respectively. Abnormal symptoms presented in 49.3% of the studied patients and 59.7% developed physical examination abnormalities. In addition, CA 125 was elevated in 89.6% while in 74.3% of tumor progression was identified by CT-scan. Short treatment time period and a high level of CA 125 were significant independent prognostic factors in these patients. In conclusion, careful history taking, physical examination and monitoring of CA 125 levels are important methods for tumor progression detection in a surveillance program for epithelial ovarian cancer patients.

• 비파괴검사학회지
• /
• 제32권3호
• /
• pp.269-275
• /
• 2012

Carbon-fiber reinforced plastic(CFRP) laminates made of nano-particle-coated carbon fibers and damaged by a simulated lightning strike were tested under compression-after-impact(CAI) mode, during which the damage progress due to compressive loading has been monitored by acoustic emission(AE). The impact damage was induced not by mechanical loading but by a simulated lightning strike. Conductive nano-particles were coated directly on the fibers, from which CFRP coupons were made. The coupon were subjected to the strikes with a high voltage/current impulse of 10~40 kA within a few ${\mu}s$. The effects of nano-particle coating and the degree of damage induced by the simulated lightning strikes on AE activities were examined, and the relationship between the compressive residual strength and AE behavior has been evaluated in terms of AE event counts and the onset of AE activity with the compressive loading. The degree of impact damage was also measured in terms of damage area by using ultrasonic C-scan images. The assessment during the CAI tests of damaged CFRP showed that AE monitoring appeared to be useful to differentiate the degree of damage hence the mechanical integrity of composite structures damaged by lightning strikes.

• 한국소음진동공학회논문집
• /
• 제16권5호
• /
• pp.514-520
• /
• 2006

In this study, the performance of a digital pile rebounding and penetration monitoring system (DPRMS) is evaluated and the measurement precision of the DPRMS is improved. The DPRMS is a high speed line-scanning camera system to measure the rebound and penetration of a pile in a construction work. A main problem in the DPRMS is a measurement error, which is caused by a shock or vibration due to a hammer impact. The measurement error is investigated by analyzing vibration signals of the DPRMS during the impact. Moreover, the frequency response functions of the DPRMS are also analyzed. As a result, it is found that the tripod height has an influence on the DPRMS performance and a shorter tripod is better. One more founding in this study is that the DPRMS should be placed with a appropriate distance from a pile for improving the measurement precision.

• Radiation Oncology Journal
• /
• 제32권2호
• /
• pp.84-94
• /
• 2014

Purpose: To quantify the cardiac dose reduction during breathing adapted radiotherapy using Real-time Position Management (RPM) system in the treatment of left-sided breast cancer. Materials and Methods: Twenty-two patients with left-sided breast cancer underwent CT scans during breathing maneuvers including free breathing (FB), deep inspiration breath-hold (DIBH), and end inspiration breath-hold (EIBH). The RPM system was used to monitor respiratory motion, and the in-house self respiration monitoring (SRM) system was used for visual feedback. For each scan, treatment plans were generated and dosimetric parameters from DIBH and EIBH plans were compared to those of FB plans. Results: All patients completed CT scans with different breathing maneuvers. When compared with FB plans, DIBH plans demonstrated significant reductions in irradiated heart volume and the heart $V_{25}$, with the relative reduction of 71% and 70%, respectively (p < 0.001). EIBH plans also resulted in significantly smaller irradiated heart volume and lower heart $V_{25}$ than FB plans, with the relative reduction of 39% and 37%, respectively (p = 0.002). Despite of significant expansion of lung volume using inspiration breath-hold, there were no significant differences in left lung $V_{25}$ among the three plans. Conclusion: In comparison with FB, both DIBH and EIBH plans demonstrated a significant reduction of radiation dose to the heart. In the training course, SRM system was useful and effective in terms of positional reproducibility and patient compliance.

• 한국인터넷방송통신학회논문지
• /
• 제22권1호
• /
• pp.171-179
• /
• 2022

본 논문은 캠퍼스 내 건물별 출입구에 출입명부를 관리할 수 있는 장치를 설치하고, 수집된 데이터를 근거로 코로나19 확진자에 대한 감시 및 추적 시스템을 소개한다. 기존 QR 기반의 전자출입명부는 스마트폰으로 QR 코드를 인식해야 하는 불편함과 건물 내 출입자의 온도를 측정할 수 없다는 단점이 있다. 또한, 국가가 캠퍼스 내의 확진자와 접촉자 정보를 관리함에 있어, 구성원들에게 신속한 정보 공유와 추적이 쉽지 않다. 이는 확진자와 밀접 접촉한 이가 또 다른 확진자를 만드는 경우를 초래할 수 있다. 따라서, 본 논문에서는 이에 대응하기 위해 얼굴 인식 기능과 온도센서를 포함한 장치를 캠퍼스 내 건물 출입구에 설치하고, 관리자가 실시간으로 건물별 구성원들의 출입현황을 모니터링하여 신속하게 추적할 수 있는 기능을 소개한다.

• 핵의학기술
• /
• 제24권1호
• /
• pp.27-32
• /
• 2020

사구체 여과율은 신 기능의 평가와 신 질환의 경과 관찰에 중요한 지표다. 현재 임상에서 사구체 여과율을 측정하는 방법은 크게 혈청 크레아티닌 수치와 ^99mTc-DTPA을 이용해서 계산하는 검사가 유용하게 이용되고 있다. Gates 공식이 발표된 이후, ^99mTc-DTPA Renal Dynamic Scan 검사시 이를 적용해 GFR을 감마카메라 장비를 이용하여 측정하고 있다. 본 논문의 목적은 Gates 공식을 적용해 사구체 여과율을 측정할 때 동위원소의 용량 변화, Matrix Size 변경에 따른 사구체 여과율을 분석해 보고자 한다. 본원에서 ^99mTc-DTPA Renal Dynamic Scan 검사를 받은 성인 환자 5명 (환자나이 = 62 ± 5, 남자 3명, 여자 2명)의 결과를 분석하였다. ^99mTc-DTPA 15 mCi를 환자의 정맥에 순간 주사 후 21분간 동적 영상을 획득하였다. Activity, Matrix Size 변화에 따라 사구체 여과율을 평가하기 위해 2-3분 구간의 양쪽 신장과 조직에 관심 영역을 설정 후 총 계수를 측정하였다. Detector와 Table 간의 거리는 30cm로 유지하였고, 동위원소의 용량 변화 평가를 위해 Pre Syringe(PR)의 용량을 15, 20, 25, 30 mCi로 설정하였고, Post Syringe(PO)의 용량을 1, 5, 10, 15 mCi로 각각 설정하였다. 그리고 각각의 Matrix size를 32 × 32, 64 × 64, 128 × 128, 256 × 256, 512 × 512, 1024 × 1024로 변경하여 값을 비교 평가하였다. Matrix Size에서 동위원소의 용량이 증가할수록 사구체 여과율의 차이는 최대 52.95%에서 최소 16.67%로 점차 감소하였다. Matrix size 변화에 따른 사구체 여과율 값은 128에서 256, 256에서 512, 512에서 1024로 변경 시 2.4%, 0.2%, 0.2%로 유사하게 나타났으나, 32에서 64, 64에서 128로 변경 시 54.3 %, 39.43%로 GFR 값의 차이가 발생하였다. 마지막으로, 현재 사용 중인 256 Matrix, Pre syringe 15 mCi의 GFR 값을 기준으로 32 Matrix, Pre Syringe 15 mCi, Post Syringe 1 mCi 조건에서 82%로 가장 큰 차이가 발생하였고, 64 Matrix, Pre Syringe 30 mCi, Post Syringe 15 mCi의 조건에서 0.2%로 유사한 결과 값을 나타내었다. 본 논문을 통해 ^99mTc-DTPA Renal Dynamic Scan에서 Gates 공식을 이용해 사구체 여과율을 측정할 때, 동위원소의 용량과 Matrix Size 변화에 따라 사구체 여과율 측정에 영향이 있음을 확인하였다. 그러므로 각 병원에서 이를 적용해 GFR을 측정할 때 적절한 Parameter를 적용해서 검사의 유용성을 높아야 한다고 생각한다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.13-16
• /
• 2005

The mechanical properties of composite materials may degrade severely in the presence of damage. Especially, the high-velocity impact such as bird strike, a hailstorm, and a small piece of tire or stone during high taxing, can cause sever damage to the structures and sub-system in spite of a very small mass. However, it is not easy to detect the damage in composite plates using a single technique or any conventional methods. In this paper, the PYDF(polyvinylidene fluoride) film sensors and strain gages were used for monitoring impact damage initiation and propagation in composite laminates. The WT(wavelet transform) and STFT(short time Fourier transform) are used to decompose the sensor signals. A ultrasonic C-scan and a digital microscope are also used to examine the extent of the damage in each case. This research demonstrate how various sensing techniques, PVDF sensor in particular, can be used to characterize high-velocity impact damage in advanced composites.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2006년도 추계학술발표회
• /
• pp.201-204
• /
• 2006

태풍의 경우, 주요 자연재해 중의 하나로 태풍의 상황을 정확하게 파악하는 것은 기상예측의 정도를 높이고, 재해를 방지하는데 중요한 역할을 할 수 있다. 일반적으로 태풍의 동향을 감시하는데 있어, MTSAT 등의 기상위성이 주로 활용되고 있다. 근년 인공위성의 원격탐사를 이용하여 광범위의 해양에 대한 해상풍과 파랑의 관측이 가능하게 되었다. 본 연구에서는, 2000년 QuickSCAT위성에 의한 해상풍의 월변동 특성을 조사하고, 7월에 한반도에 영향을 준 태풍 카이탁내의 해상풍을 검토하였다. 추가로 2005 년 8월 30일의 태풍 탈림에 대해서 ENVISAT ASAR Scan SAR에 의한 해상풍 추출을 시도하였다. QuickSCAT 에 의한 풍향을 이용한 방법과 SAR 자체의 패턴을 이용한 방법이 비교되었다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.190-194
• /
• 2003

Two different types of nondestructive evaluation (NDE) techniques were employed to investigate the tensile behavior of ceramic matrix composites (CMCs). Two NDE methods, ultrasonic testing (UT) and infrared (IR) thermography, were used to assess defects and/or damage evolution before and during mechanical testing. Prior to tensile testing, a UTC-scan and a xenon flash method were performed to obtain initial defect information in light of UT C-scans and thermal diffusivity maps, respectively. An IR camera was used for in-situ monitoring of progressive damages. The IR camera measured temperature changes during tensile testing. This paper has presented the feasibility of using NDE techniques to interpret structural performance of CMCs.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.27-30
• /
• 2005

This paper studied the PVDF(polyvinylidene fluoride) and Acoustic Emission sensors characteristics of the laminated composite panels under the low velocity impact. The various impact test by changing impact height is performed on the instrumented drop weight impact tester. The STFT(short time Fourier transform) and WT(wavelet transform) are used to decompose the each sensor signals. A ultrasonic C-scan and digital scope are used to define damaged area in each case. The test result indicated that the individual sensor signals involve the damage initiation and development.