• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.5
• /
• pp.442-446
• /
• 2015

As electricity consumption is increasing rapidly these days, an urgent. need exists to minimize consumption through smart and intelligent ways in order to prevent a future energy crisis. For this purpose, development of an intelligent peak power management system should be required. As the number of appliances and consumer electrical devices increase, power consumption in unit business tends to grow. Generally, electricity consumption can be minimized using a peak power management system capable of. effectively controlling the load power by continuously monitoring the power. In this work, a peak power management system which consists of arduino microprocessor equipped with ethernet and Zigbee shield is presented. To verify the feasibility of the proposed scheme, laboratory-scale experiments are carried out.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.1
• /
• pp.1-10
• /
• 2020

This paper is a IoT-based radon meter control system and a radon meter control method using it. The IoT-based radon meter control system is control system for controlling a radon meter by network-connecting radon meter and a user terminal. The radon measuring device may be provided with a radon sensor to measure a radon value of a preset management target area, it collect and store numerical data. The radon meter control system monitors the condition of the radon meter, it includes control center configured to deliver radon meter management information generated to a user terminal. Also radon measurements to determine the exact amount of radon gas. Therefore, the situation-specific actions based on radon numbers can be promptly implemented to ensure adequate protection for those who are vulnerable to radon and those who live in the area. Condition monitoring allows the radon meter to respond quickly to failure or failure of the radon meter. In addition, it is possible to secure a baseline of radon's influence and to obtain research data to cope with radon by establishing big data with radon measurements.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.56.2-56.2
• /
• 2012

Clinically-favored materials for bone regeneration are mainly based on bioceramics due to their chemical similarity to the mineral phase of bone. A successful scaffold in bone regeneration should have a 3D interconnected pore structure with the proper biodegradability, biocompatibility, bioactivity, and mechanical property. The pore architecture and mechanical properties mainly dependent on the fabrication process. Bioceramics scaffolds are fabricated by polymer sponge method, freeze drying, and melt molding process in general. However, these typical processes have some shortcomings in both the structure and interconnectivity of pores and in controlling the mechanical stability. To overcome this limitation, the rapid prototyping (RP) technique have newly proposed. Researchers have suggested RP system in fabricating bioceramics scaffolds for bone tissue regeneration using selective laser sintering, powder printing with an organic binder to form green bodies prior to sintering. Meanwhile, sintering process in high temperature leads to bad cost performance, unexpected crystallization, unstable mechanical property, and low bio-functional performance. The development of RP process without high thermal treatment is especially important to enhance biofunctional performance of scaffold. The purpose of this study is development of new process to fabricate ceramic scaffold at room temperature. The structural properties of the scaffolds were analyzed by XRD, FE-SEM and TEM studies. The biological performance of the scaffolds was also evaluated by monitoring the cellular activity.

• Journal of Family Relations
• /
• v.21 no.3
• /
• pp.95-122
• /
• 2016

Objectives: The purpose of this study was to find out the moderating effect of gender between parenting attitude and anger expression of adolescent. Particularly, to ensure that the anger of emotion is common nature, this study was conducted on the middle class adolescent of stable economic status. Method: The subjects of this study were 357 students, first grade from 3 high schools in Seoul. Data was analyzed by descriptive statistics, t-test, correlation, and hierarchial regression, using the SPSS 18.0 program. Results: The main results were as follows: First, in parenting attitude the perception of monitoring and affection was less important for boys than girls, but more important in over expectation and neglect. Second, in anger expression the level of anger-control appeared higher than anger-in and anger-out, no significant gender difference in subfactors. Third, the effect of gender moderated the relationships between parenting attitude and anger expression of adolescent. Conclusions: The results indicated the need to recognize gender difference in controlling anger of adolescent and to improve dysfunctional parenting attitude in middle class. Furthermore, the implications were discussed in enhancing parent-adolescent communication, developing emotional education programs, and preventing juvenile delinquency.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.6
• /
• pp.482-490
• /
• 2023

With the advent of the Fourth Industrial Revolution, many companies are developing Smart Ships to enable autonomous navigation, unmanned operation, and cost-effective shipping. In order to facilitate the operation of these Smart Ships, significant emphasis is being placed on improving external communication capabilities and developing autonomous navigation systems. Moreover, unmanned ship operation necessitates replacing of all visually observed conditions with sensors, leading to an inevitable increase in the number of sensors and actuators compared to traditional methods. However, in South Korea, the communication network for sensors and actuators primarily relies on the conventional 1:1 hardwired wiring, with the use of higher-level communication networks when necessary. Therefore, in this paper, we introduce the AS-Interface protocol, which is used for monitoring and controlling sensors and actuators, with the expectation that it will greatly contribute to the development of future Smart Ships by reducing production time, costs, and maintenance duration.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.477-480
• /
• 2008

In this paper, we design the TCP-Light protocol for directly connecting a sensor network with Internet. When we are monitoring the data and controlling of the sensor node, the sensor network must be connected to Internet. But TCP in wireless networks has a number of performance problems which is high bit-error rates and a hardware constraint. Moreover, the end-to-end acknowledgment and retransmission scheme employed by TCP causes expensive retransmissions along every hop of the path between the sender and the receiver. This paper introduces The TCP-Light protocol which increases TCP performance in wireless sensor networks, decreases the number of end-to-end retransmissions and decreases memory consumption.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.12
• /
• pp.1231-1236
• /
• 2016

Paris Agreement signed in January 2015 is a new rule that will replace the existing Kyoto Protocol. The new agreement needs new demands and challenges to minimize carbon emissions. Especially, even though agricultural sector occupies only 1.8% in the national energy consumption, the portion of the energy being occupied in agricultural production costs very high. Although renewable energy and energy-saving facilities is being developed and disseminated for replacing fossil fuel energy and saving energy, the installation-rate is not enough high. Thus, this paper developed Korean-style smart farm system, and carried out the experiment to show the performance of energy savings through analyzing proper environment in domestic situation.

• Journal of the Korean Ceramic Society
• /
• v.41 no.2
• /
• pp.97-101
• /
• 2004

W $O_{x}$-based semiconductor type thin film gas sensor was fabricated for the detection of N $O_{x}$ by reactive d.c. sputtering method. The relative oxidation state of the deposited W $O_{x}$ films was approximately compared by the calculation of the difference of the binding energy between Ols to W4 $f_{7}$2/ core level XPS spectra in the standard W $O_3$ powder of known composition. As the annealing temperature increased from 500 to 80$0^{\circ}C$, relative oxygen contents and grain size of the sputtered films were gradually increased. As the results of sensitivity ( $R_{gas}$/ $R_{air}$) measurements for the 5 ppm N $O_2$ gas, the sensitivity was 110 and the sensor showed recovery time as fast as 200 s. The other sensor properties were examined in terms of surface microstructure, annealing temperature, and relative oxygen contents. These results indicated that the W $O_3$ thin film with well controlled structure is a good candidate for monitoring and controlling of automobile exhaust.haust.t.t.t.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.885-890
• /
• 1988

This is a successive study of the development and application of an electronic safeguard system for elderly men (senile dementia patients) who wander without purpose because of declined mental capability, while retaining their physical ability. The new safeguard system is designed with some additional functions on the basis of the previously developed system. Firstly, alarms are designed not to disturb other patients at night, so that informations about doors from which the patients go out may be transmitted to helpers individually by radio paging system. Secondly, the system hardware can be set up anywhere without laying particular signal transmission cables, provided that there exist AC power distribution lines for the utilization as a transmission line of signals to alarm indicators. Thirdly, it is possible to have a grasp of the whole states of the safeguard systems at the center of operation by monitoring the operational state of each system with a necessary data acquisition according to its instruction through telecommunication network. Thus, each safeguard system can be economically supplied to the special nursing homes and the helpers are ensured more released from physical and psychological burdens so that they can devote themselves to the care of senile elderly men, thereby improving their patients' comfort and human dignity.

• International Journal of Quality Innovation
• /
• v.6 no.3
• /
• pp.70-94
• /
• 2005

The IC packaging industry heavily relies on shop floor information, necessitating the development of a model to flexibly define shop floor information and timely handle manufacturing data. This study presents a novel data model of product manufacturing flow to define shop floor information to effectively respond to accelerated developments in IC package industry. The proposed data model consists of four modules: operation template setup, general process setup, enhanced bill of manufacture (EBOMfr) setup, and work-order process setup. The data model can flexibly define the required shop floor information and decision rules for shop floor product manufacturing flow, allowing one to easily adopt changes of the product and on the shop floor. However, to handle floor dynamics of the IC packaging industry, this work also proposes a WIP (i.e. work-in-process) system for monitoring and controlling the product manufacturing flow on the shop floor. The WIP system integrates the data model with a WIP execution module. Furthermore, an illustrative example, the MIRL WIP System, developed by Mechanical Industrial Research Laboratories of Industrial Technology Research Institute, demonstrates the effectiveness of the proposed model.