• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.1
• /
• pp.24-34
• /
• 2008

To mitigate the climate change and global warming, various technologies have been internationally proposed for reducing greenhouse gas emissions. Especially, in recent, carbon dioxide capture and storage (CCS) technology is regarded as one of the most promising emission reduction options that $CO_2$ be captured from major point sources (eg., power plant) and transported for storage into the marine geological structure such as deep sea saline aquifer. The purpose of this paper is to review the latest progress on the development of technologies for $CO_2$ storage in marine geological structure and its perspective in republic of Korea. To develop the technologies for $CO_2$ storage in marine geological structure, we carried out relevant R&D project, which cover the initial survey of potentially suitable marine geological structure fur $CO_2$ storage site and monitoring of the stored $CO_2$ behavior, basic design for $CO_2$ transport and storage process including onshore/offshore plant and assessment of potential environmental risk related to $CO_2$ storage in geological structure in republic of Korea. By using the results of the present researches, we can contribute to understanding not only how commercial scale (about 1 $MtCO_2$) deployment of $CO_2$ storage in the marine geological structure of East Sea, Korea, is realized but also how more reliable and safe CCS is achieved. The present study also suggests that it is possible to reduce environmental cost (about 2 trillion Won per year) with developed technology for $CO_2$ storage in marine geological structure until 2050.

• Journal of Animal Science and Technology
• /
• v.54 no.5
• /
• pp.363-368
• /
• 2012

This study was conducted to investigate the effects of dietary garlic and may flower powder on $CO_2$ and $CH_4$ emission by Hanwoo cows fed TMR (Total Mixed Ration) based diet. Animals were housed in a hood-type respiration chamber and the environmental temperature was maintained at $20^{\circ}C$. Gases were measured for 24 hours using the multi-detector instrument gas monitoring system (Mamos-300, Australia). The treatments composed of groups with no intake of garlic and may flower powder (Control), with intake of garlic at 0.5% of DM (T1), with intake of garlic at 1% of DM (T2), with intake of may flower at 0.5% of DM (T3), with intake of may flower at 1% of DM (T4), with intake of garlic and may flower at 0.5% of DM (T5) and with intake of garlic and may flower at 1% of DM (T6). The results indicated that $CO_2$ emission in T3 was 53% lower than that of control (p<0.05), and $CH_4$ emissions was 57% lower than control (p<0.05). Also, the hourly pattern of $CO_2$ and $CH_4$ emissions in T3 showed the least difference with all treatments. Gas emissions pattern peaked after 1 hour of feeding and this gap was wider in the afternoon than in the morning hours.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.2
• /
• pp.183-191
• /
• 2020

This study monitored the rheological properties of jams manufactured using the black ginseng and black garlic. The conditions for mixing black jam were black ginseng (X₁, 30-54 g), black garlic (X₂, 75-135 g), pectin 4.5 g, apple paste 270 g, and fructo-oligosaccharide 360 g. The response surface analysis was performed with springiness, cohesiveness, chewiness, brittleness and gumminess. The R²s of the regression equation for springiness, cohesiveness, chewiness, brittleness and gumminess were recognized at a significant level of 5 to 10 %, with 0.8948, 0.9103, 0.9032, 0.9097, and 0.8561, respectively. The combination conditions of black ginseng and black garlic with the highest springiness of black jam were found to be 194.39% (springiness) with black ginseng 54.00 g and black garlic 105.83 g, while the conditions of black ginseng and black garlic mixing with the lowest springiness were found to be 164.11% with black ginseng 31.48 g and black garlic 119.43 g. The mixing conditions of black ginseng and black garlic with the highest cohesiveness of black jam and its consistency were 40.96% (cohesiveness) with black ginseng 48.85 g and black garlic 129.62 g, while black ginseng and black garlic combination conditions with the lowest cohesiveness were found to be 32.96% with black ginseng 50.06 g and black garlic 82.77 g. Black ginseng and black garlic mixing conditions, which have the highest chewiness of black jam, was 43.19 g (chewiness) from black ginseng 42.95 g and black garlic 106.83 g. Black ginseng and black garlic mixing conditions and their brittleness were found to be the highest in black ginseng 32.10 g and black garlic 88.04 g to 16,874 g. Black ginseng and black garlic mixing conditions and their brittleness were found to be 678 g from black ginseng 50.53 g and black garlic 83.91 g. Black ginseng and black garlic mixing conditions and their gumminess were 14.06 g with black ginseng content of 32.91 g and black garlic content of 124.60 g. By examining the relationship between black ginseng/black garlic ratio and the rheological property of black jam from above results, it is believed that black jam can be produced for anyone to enjoy using health function material.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.4
• /
• pp.333-340
• /
• 2010

The Korean Dendropanax lacquer, made from a natural resinous sap from Dendropanax orbifera Lev., was used as a golden and transparent varnish for the traditional artifacts (armor uits, helmets, arrowheads, etc.) to make them be brilliant golden color. The cured film of the acquer has excellent protective properties such as weatherability, water resistance, and nticorrosive. But, one of disadvantages is that takes a long time and much energy to fulfill curing the lacquer. The chemical constituents of the lacquer contained conjugated diene compounds s the photopolymerizable monomers. These monomers easily polymerized in sunlight to form olden-colored, hard-coating films in a short time. Photooxidation may be one of the most mportant reactions in the chemistry of the lacquer. Although the Korean Dendropanax Lacquer hould be dried to a thoroughly dry stage to achieve optimal film properties, curing with elevated emperatures may be required for the protracted curing time at atmospheric temperature. So we ntended to accelerate the curing rate of the lacquer by dual curing of thermal and radiation uring. The effect of thermal initiator on the thermal curing reaction was evaluated by monitoring he changes in double bond peak with FT-IR. Then the curing rate of the lacquer blended with hermal initiator and photoinitiator together was measured during dual curing using a RPT with V spot curing machine. Thermal initiator not only accelerated the curing rate but also improved he physical property. And the curing rate of the Korean Dendropanax lacquer was improved by ual curing method of thermal and UV curing. According to these results, the application area of he Korean Dendropanax lacquer could be expanded to surface coatings for electronic devices uch as mobile phones or electronics.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.3
• /
• pp.216-224
• /
• 1998

The objective of this study was to investigate the effect of sesame monoculture and sesame in rotation (SR) with maize. soybean. barley or rye on reduction of injury by continous cropping in sesame. Field studies were conducted for 3-years (1995~1997) at the experimental field of the Crop Experiment Station. Compared to CS (continuous sesame). SR treatments turned out to keep more organic matter and higher exchangeable cation concentrations in soils. BS (barley and sesame in a 1-year rotation) and RS (rye and sesame in a 1-yea r rotation) treatments had significantly greater available $P_2O_5$ contents in soils than CS, MS (maize and sesame in a 3-year rotation) and SbS (soybean a nd sesame in a 3-year rotation). The pH of the soils under different treatments were not significantly different. SR treatments exhibited significantly lower bulk density and higher pore space than CS. Soil microbial biomass C (SMBC) and N (SMBN) were determined by the chloroform fumigation-extraction method. SMBC and SMBN were significantly higher in soils under BS and RS than those under CS, but only during the 1 year of monitoring. MS and SbS treatments resulted in higher SMBC and SMBN than CS. The occurrence of injury by disease of sesame is the important primary factor of injury by continous cropping, but the disease occurrence with rotation did not decrease in th is experiment. Under CS treatment, the growth and grain of sesame was significantly lower than those under other treatments. Compared to CS, the increments of grain yield of sesame were 68, 63, 57 and 51% for MS, RS, SbS and BS, respectively in the first harvest. In the second harvest, they were 24% for MS, 28% for RS, 20% for SbS and 19% for BS. The average increase ratios during the two years were 41, 41, 34, and 33% for MS, RS, SbS and BS, respectively.

• Journal of Bio-Environment Control
• /
• v.23 no.2
• /
• pp.158-166
• /
• 2014

This experiment has investigated suitable methods to improve precision water content monitoring of coconut coir substrates to control irrigation by frequency domain reflectometry(FDR) sensors. Specifically, water content changes and variations were observed at different sensing distances and positions from the irrigation dripper location, and different spaces between the FDR sensors with or without noise filters. Commercial coconut coir substrates containing different ratios of dust and chips(10:0, 7:3, 5:5, 3:7) were used. On the upper side and the side of the substrates, a FDR sensor was used at 5, 10, 20, 30cm distances respectively from the irrigation dripper point, and water content was measured by time after the irrigation. In the glass beads, sensors were installed with or without noise filtering. Closer sensing distance had a higher water content increasing rate, regardless of different coir substrate ratios. There were no differencies of water content increasing rates in 10:0 and 3:7 substrates between the upper side and the side. Whereas, 7:3 and 5:5 substrates showed higher increasing rates on the upper side measurements. Substrates with higher ratios of chip(3:7) had lower increasing rates than others. And, with noise filters, the exatitude of measurement was improved because the variation and deviation were reduced. Therefore, in coconut coir with FDR sensors, an efficient water content measurment to control irrigations can be achieved by installing sensors closer to an irrigation point and upper side of substrates with noise filters.

• Korean Journal of Food Science and Technology
• /
• v.28 no.5
• /
• pp.928-934
• /
• 1996

Rice bran, treated with heat or ${\gamma}-radiation$, was stored at $-15^{\circ}C,\;4^{\circ}C,\;37^{\circ}C$ and room temperature to determine its lipid stability by monitoring the changes in moisture, free fatty acids (FFA) and peroxide value (POV). Initial moisture content of rice bran was 14% and decreased with time. The higher storage temperature, the more moisture loss. The moisture content became 9% after 80 days of storage at $37^{\circ}C$. The initial FFA of rice bran was 2.5% which increased with time except the samples stored at $-15^{\circ}C$. The higher storage temperature, the more FFA was produced, by 9 times the initial FAA after 80 days of storage at $37^{\circ}C$. POV increased about twice the initial value after 80 days of storage at $-15^{\circ}C,\;4^{\circ}C$, and room temperature, and 5 times at $37^{\circ}C$. Rice bran was treated with heat at $70^{\circ}C,\;90^{\circ}C\;or\;105^{\circ}C$ and stored for 2 weeks at $30^{\circ}C$: The higher the heat treatment temperature and the longer the heat treatment time, the more moisture was lost. The not show any significant changes. Irradiation at $1{\sim}30\;kGy$ and subsequent storage for 4 weeks at $5^{\circ}C\;or\;30^{\circ}C$ caused negligible changes in moisture content. The FFA contents of rice bran irradiated up to 10 kGy were almost similar to these of nonirradiated one when measured just after irradiation. The samples irradiated at 30 kGy were 1.5 times higher in the FFA contents than nonirradiated ones. But there was little influence of irradiation doses on the FFA contents during storage. Irradiation caused the increase in POV of rice bran. resulting in 4 times increase in case of 30 kGy irradiated sample. During the storage, however, the POV of irradiated rice bran decreased significantly.

• Korean Journal of Food Science and Technology
• /
• v.45 no.2
• /
• pp.148-155
• /
• 2013

Sulfoxaflor is a new active ingredient within the sulfoximine insecticide class that acts via a unique interaction with the nicotinic receptor. The MRLs (maximun residue limit) of sulfoxaflor in apple and pear are set at 0.4 mg/kg and that in pepper is set at 0.5 mg/kg. The purpose of this study was to develop an analytical method for the determination of sulfoxaflor residues in agricultural commodities using HPLC-UVD and LC-MS. The analysis of sulfoxaflor was performed by reverse phase-HPLC using an UV detector. Acetone and methanol were used for the extraction and aminopropyl ($NH_2$) cartridge was used for the clean-up in the samples. Recovery experiments were conducted on 7 representative agricultural products to validate the analytical method. The recoveries of the proposed method ranged from 82.8% to 108.2% and relative standard deviations were less than 10%. Finally, LC-MS with selected ion monitoring was also applied to confirm the suspected residues of sulfoxaflor in agricultural commodities.

• Korean Journal of Food Science and Technology
• /
• v.45 no.2
• /
• pp.241-247
• /
• 2013

AOAC Mouse Bioassay Analysis (MBA) has been the gold standard for the analysis of paralytic shellfish poisoning toxin (PSP toxin) for more than 50 years. However, this method has inaccurate limit of quantification and cannot be used to determine toxic profiles. An HPLC method (PCOX) was optimized for Korean shellfish to establish an alternative or supplementary method for PSP analysis and was intended to be used for the official monitoring and regulation of food. The recovery rate of the PCOX method was 83.5-112.1% and the limit of quantification for total toxin was about $8.6{\mu}g$/100 g. A long-term comparison study showed a good correlation of the PCOX results with the AOAC MBA results: the correlation factors were 0.9534 and 0.9109 for oyster and mussel matrices, respectively. The PCOX method may be used as an alternative or supplementary method for AOAC MBA to monitor the occurrence of PSP and to analyze PSP toxin profile in oysters and mussels.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.126-130
• /
• 2012

Purpose : Methode an effective block was investigated to deal with volatile radioactive gas, short lived radioactive waste generated as a result of the routinely produced radiopharmaceuticals FDG (2-deoxy-2-[$^{18}F$]fluoro-D-glucose) and compound with $^{11}C$. Materials and Methods : All components of the radiation stack monitoring and data management system for continuous radioactive gas detection in the air extract system purchase from fixed noble gas monitor of Berthold company. TEDLAR gas sampling bags purchase from the Dongbanghitech company. TEDLAR gas sampling bags (volume: 10 L) connected via paraflex or PTFE tubing and Teflon 3 way stopcock. When installing TEDLAR gas sampling bags in Hot cell on the inside and not radioactive gas concentrations were compared. According to whether the Hot cell inside a activated carbon filter installed, compare the difference in concentration of the radioactive gas $^{18}F$. Comparison of radiation emission concentration difference of module a FASTlab and TRACElab. Results : Activated carbon filter are installed in the Hot cell, a measure of the concentration of radioactive gas was 8 $Bq/m^3$. Without activated carbone filter in the hot cell was 300 $Bq/m^3$. Tedlar bag prior to installation of the radioactive gases a measure of the concentration was 3,500 $Bq/m^3$, $^{11}C$ synthesis of the measured concentration was 27,000 $Bq/m^3$. After installed a Tedlar bag and a measure concentration of the radioactive gases was 300 $Bq/m^3$ and $^{11}C$ synthesis was 1,000$Bq/m^3$. Conclusion : $^{11}C$ radioactive gas that was ejected out of the Hot cell, with the use of a Tedlar gas sampling bag stored inside. A compound of 11C is not absorbed onto activated carbon filter. But can block the release out by storing in a Tedlar gas sampling bag. We was able to reduce the radiation exposure of the worker by efficient radiation protection.