• Journal of Korean Society of Steel Construction
• /
• v.22 no.1
• /
• pp.21-31
• /
• 2010

In this study, a technique that uses wireless impedance sensor nodes is proposed to monitor tensile force of structural cable. To achieve this goal, the following approaches were implemented. First, a wireless impedance sensor node was designed for automated and cost-efficient prestress-loss monitoring. Second, an impedance-based algorithm was embedded in the wireless impedance sensor node for autonomous structural health monitoring of structural cables. Third, a tensile force monitoring technique that uses an interface plate for structural cables was proposed to overcome the limitations of the wireless impedance sensor node such as its narrow-band measurable frequency ranges. Finally, the applicability of the wireless impedance sensor node and the technique that uses the interface washer were evaluated in a lab-scaled prestressed concrete (PSC) girder model with internal and external tendons for which several prestress-loss scenarios were experimentally monitored with the wireless impedance sensor nodes.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.4
• /
• pp.199-205
• /
• 2021

The distributing board in directly installed on the ground or the bottom surface of the building, and when vibrations such as earthquakes or external shocks occur, the possibility of damage or malfunction of electric components such as internal power devices, wiring, and protection relays increases. Recently, the need for a seismic type distributing board is increasing, and research and development of a distributing board having a vibration damping function and product launch are being conducted. In this paper, an IoT-based data collection device system capable of measuring vibration and environmental data of distributing board was designed and implemented. When vibration occurred on the distributing board, data was stored and visualized in the MySQL DB through Node-RED for monitoring and data storage using the MQTT protocol for reliable messaging transmission. The test was conducted by attaching the IoT device of the distributing board, and data was collected in real-time and monitored through Node-RED.

• Archives of Plastic Surgery
• /
• v.47 no.1
• /
• pp.42-48
• /
• 2020

Background Methods for identifying local lymph node metastasis in malignant melanoma include sentinel lymph node biopsy (SLNB) and lymph node dissection (LND). In particular, SLNB has been widely used in recent years. This study aimed to retrospectively confirm the adequacy of the current indication criteria for SLNB by applying those criteria to a mixed group of patients who previously received SLNB and LND. Methods This study included 77 patients with malignant melanoma of the extremities and trunk who were monitored for >24 months. The patients were classified according to whether the current indication criteria for SLNB were applicable. The sentinel lymph nodes were evaluated for each group. Patients for whom the indication criteria for SLNB and LND were applicable were analyzed according to whether SLNB or LND was performed. Finally, the outpatient records of these patients were reviewed to evaluate recurrence, metastasis, and prognosis. Results Of the 77 patients, SLNB was indicated according to the current criteria in 60 cases. Among the 60 patients for whom SLNB was indicated, 35 survived the follow-up period disease-free, 21 died during the follow-up period, and four experienced metastasis. The 17 patients for whom SLNB was not indicated had no recurrence or metastasis. Conclusions Patients for whom SLNB was not indicated had no recurrence or metastasis. In cases where SLNB is indicated, the possibility of metastasis and recurrence may be high even if SLNB is negative or LND is performed, so more aggressive treatment and careful follow-up are crucial.

• Journal of Sensor Science and Technology
• /
• v.16 no.2
• /
• pp.142-149
• /
• 2007

Wireless sensor network technology is an emerging technology consisting of small, low power, and low cost devices that integrate limited computation, sensing, and radio communication capabilities. An ad-hoc home network system based embedded system for home environment monitoring was fabricated and tested. The wireless sensor node consists of a MCU, RF transceiver and sensors (temperature, humidity and light). Wireless sensor nodes run application software for data sampling and wireless communication, that was developed using 'nesC language' which runs on TinyOS. In our tests, acquired sensors data were monitored on 6.4" TFT-LCD of base-station through IEEE802.15.4 standard wireless communication. Also, the sensor data can be monitored by client user at the terminal PC to monitor environmental status of home in real time.

• Journal of information and communication convergence engineering
• /
• v.8 no.2
• /
• pp.219-222
• /
• 2010

An ubiquitous sensor network (USN) system to monitor the bio information and the emergency of the elderly in the silver town is presented. The USN system consists of the sensor node platforms based on MCU of Atmage128L and RF Chip of CC2420 satisfying IEEE 802.15.4, which includes the bios sensor module such as the electrocardiogram (ECG) sensor and the temperature sensor. Additionally, when an emergency of the elderly is occurred in the silver town, the routing algorithm suitable to find and inform the location of the elderly is proposed, and the proposed routing algorithm is applied to the USN. To collect and manage the ECG data at the PC connected to the sink node, LabView software is used. The bio information and the emergency of the elderly can also be monitored at the client PC by TCP/IP networks in the USN system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.445-450
• /
• 2011

In this paper, we describe the implementation of an wireless sensor network testbed. We developed a web-based sensor network gateway and enhanced the Surge program which is used for sending and routing of packets in the sensor field. The developed program can transmit the source data of sensor nodes to the sink node via multi-hop routing, and deliver user commands to actuate sensor related equipments. Moreover, in this testbed, the data transport path from a node to the sink can be monitored. Thus we can approximate the network topology and the relative positions of sensor nodes. We also describe an application of the testbed that is used for controlling a remote robot.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.357-360
• /
• 2007

An asset tracking using wireless sensor network is concerned with geographical locations of sensor nodes. The limited size of sensor nodes makes them attractable for tracking service, at the same time their size causes power restrictions, limited computation power, and storage restrictions. Due to such constrained capabilities, the wireless sensor network basically assumes the failure of sensor nodes. This causes a set of concerns in designing asset tracking system on wireless sensor network and one of the most critical factors is location uncertainty of sensor nodes. In this paper, we classify the location uncertainty problem in asset tracking system into following cases. First, sensor node isn't read at all because of sensor node failure, leading to misunderstanding that asset is not present. Second, incorrect location is read due to interference of RSSI, providing unreliable location of asset. We implemented and installed our asset tracking system in a real environment and continuously monitored the status of asset and measured error rate of location of sensor nodes. We present experimental results that demonstrate the location uncertainty problem in asset tracking system using wireless sensor network.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.5
• /
• pp.3-11
• /
• 2018

Since the tensegrity structure is flexible and variable, the study on the mobility to the tensegrity has been conducted. However, it is difficult to apply the tensegrity to the architecture field due to several limits. This paper describes the methodology for the analysis of the shape change process of single prism tensegrity structure as an initial study. To apply the tensegrity structure to the architectural field, the assemblage and mathematical formulation procedures of the single prism tensegrity structures are carried out. And single prism tensegrity are presented to the computational strategies for simulate the shape change of those structures. Next, the investigation of structural behaviors through various cases of target displacements is described. Also, the summary of these methods in algorithms is illustrated. As a result it is confirmed that the single prism tensegrity structure model converges 99% on average to a given target node by using the proposed algorithm. Therefore, it is confirmed that the proposed algorithm and program are suitable for shape change analysis of single prism tensegrity structure model.

• Journal of Communications and Networks
• /
• v.11 no.6
• /
• pp.589-598
• /
• 2009

In wireless sensor networks, a node that reports information gathered from adjacent assets should relay packets appropriately so that its location context is kept private, and thereby helping ensure the security of the assets that are being monitored. Unfortunately, existing routing methods that counter the local eavesdropping-based tracing deal with a single asset, and most of them suffer from the packet-delivery latency as they prefer to take a separate path of many hops for each packet being sent. In this paper, we propose a routing method, greedy perimeter stateless routing-based source-location privacy with crew size w (GSLP-w), that enhances location privacy of the packet-originating node (i.e., active source) in the presence of multiple assets. GSLP-w is a hybrid method, in which the next-hop node is chosen in one of four modes, namely greedy, random, perimeter, and retreat modes. Random forwarding brings the path diversity, while greedy forwarding refrains from taking an excessively long path and leads to convergence to the destination. Perimeter routing makes detours that avoid the nodes near assets so that they cannot be located by an adversary tracing up the route path. We study the performance of GSLP-w with respect to crew size w (the number of packets being sent per path) and the number of sources. GSLP-w is compared with phantom routing-single path (PR-SP), which is a notable routing method for source-location privacy and our simulation results show that improvements from the point of the ratio of safety period and delivery latency become significant as the number of source nodes increases.

• Journal of Ecology and Environment
• /
• v.41 no.9
• /
• pp.256-264
• /
• 2017

Background: The aim of this study was to clarify the relationship between the sexual reproduction and the resource allocation in a natural Polygonatum humile population grown in a temperate mixed forest gap. For this aim, the plant size, the node which flower was formed, the fruiting rate, and the dry weight of each organ were monitored from June 2014 to August 2015. Results: Firstly, in 3-13-leaf plants, plants with leaves ${\leq}8$ did not have flowers and in plants with over 9 leaves the flowering rate increased with the number of leaves. Among plants with the same number of leaves, the total leaf area and dry weight of flowering plants were larger than those of non-flowering plants. The minimum leaf area and dry weight of flowering plants were $100cm^2$ and 200 mg, respectively. Secondary, the flowers were formed at the 3rd~8th nodes, and the flowering rate was highest at the 5th node. Thirdly, cumulative values of leaf properties from the last leaf (the top leaf on a stem) to the same leaf rank were greater in a plant with a reproductive organ than in a plant without a reproductive organ. Fourthly, fruit set was 6.1% and faithful fruit was 2.6% of total flowers. Biomasses of new rhizomes produced per milligram dry weight of leaf were $0.397{\pm}190mg$ in plants that set fruit and $0.520{\pm}0.263mg$ in plants that did not, and the difference between the 2 plant groups was significant at the 0.1% level. Conclusions: P. humile showed that the 1st flower formed on the 3rd node from the shoot's base. And P. humile showed the minimum plant size needed in fruiting, and fruiting restricted the growth of new rhizomes. However, the fruiting rate was very low. Thus, it was thought that the low fruiting rate caused more energy to invest in the rhizomes, leading to a longer rhizome. A longer rhizome was thought to be more advantageous than a short one to avoid the shading.