• 대한산업공학회지
• /
• 제32권3호
• /
• pp.236-241
• /
• 2006

Monitor height is one of the key factors in the VDT workstation design. Most of the previous studies have focused on traditional VDT workplace where the operators performed data entry or word processing tasks using single monitor. This study aimed to suggest proper monitor height when the main task was monitoring information from different number of information sources. Twelve male students participated in three experiments: single information source (one monitor), two information sources (one monitor and one CCTV), and three information sources (one monitor, one CCTV and a window). Subjects performed monitoring tasks for 10 minutes with 3 different monitor center heights : 89.0 cm (Low), 111.3 cm (Middle), and 124.8 cm (High). Surface EMG signals of five neck muscles, subjective discomfort ratings, preference, and working postures were recorded. Results indicated that the middle height was proper for one monitor condition, but the low monitor height was recommended for more than two information sources.

• International Journal of Safety
• /
• 제7권1호
• /
• pp.35-38
• /
• 2008

The purpose of this study is to extract typical body shape of Korean VDT workers based on the three-dimensional Korean shape data and recommendation supported by Korea Occupational Safety & Health Agency during VDT task. Desirable desk heights and chair heights for the selection of the VDT working posture is proposed by analyzing moment, compression and joint shear for lumbar and spine of Korean adult(male and female). The desirable heights for desk and chair can be selected by the least load method during VDT tasks. In the current work the figures of Korean 50th percentile offered by CATIA-HUMAN are used as the average body type of the grown-ups and this research is accomplished with the recommended size of all working attitude such as the height of a monitor except for the height of desk and chair and the degree of watching the monitor.

• 대한임베디드공학회논문지
• /
• 제6권2호
• /
• pp.76-85
• /
• 2011

In conventional methods for measuring snow height, a graduated pole is installed on ground in an area of interest and the snow height is manually read from the pole. Recently, automated snow height measurement systems have been introduced to improve the conventional methods. The automated measurement systems, however, are quite expensive since they use the reflection of ultrasonic waves or laser beams. In addition, it is not easy to move the location of the automated measure systems. This paper proposes a snow height measurement system equipped with image sensors and wireless communication capability via a USN and the Internet. The proposed system has a resolution of 5 cm and easy to deploy without difficulties, which can be usefully used to monitor unforseen local snowfalls.

• PNF and Movement
• /
• 제8권3호
• /
• pp.39-47
• /
• 2010

Purpose : The purpose of this study was to investigate the correlations between clinical balance scales and Balance Performance Monitor parameters in patient with adolescent idiopathic scoliosis (AIS). Methods : Twenty AIS subjects (age, $14.26{\pm}1.93yrs$; height, $160.56{\pm}7.98cm$; weight, $47.54{\pm}6.94kg$)were participated in this study. Postural sway(mean balance, sway angle, sway area, sway path, maximal sway velocity) were were evaluated by balance performance monitor. Measurements for clinical balance scales were Functional reach test (both side), the Lateral reach test (both side) and One leg standing test (both legs). Results : The results were as follows. There were positive strong correlation between major curve direction and left-right sway angle, sway path, maximal sway velocity. There were negative strong correlation between the functional reach and left-right sway angle, sway area, sway path, maximal sway velocity. And the lateral reach were also showed negative strong correlation parameters of balance performance monitor. One leg standing were negatively correlated with left-right sway angle, sway path, maximal sway velocity. Conclusion : The clinical balance scales will be useful tools for balance measurements, and basic tools for clinical setting for patient with AIS.

• 한국직업건강간호학회지
• /
• 제12권2호
• /
• pp.134-145
• /
• 2003

Purpose: The present study examines symptoms of VDT syndrome perceived by those nurses reviewing the application of health insurance at hospitals. This study also investigates those factor influencing on the experience of VDT syndrome among those nurses. Method: Data were collected through mail questionnaire survey in April, 2003. Of the 250 questionnaires disseminated, 214 questionnaires were finally analyzed using descriptive statistics and multiple regression analysis through SPSS/PC version 10.0. Result: Of the VDT syndrome, the musculoskeletal symptom score was highest, followed by ophthalmologic symptoms. The musculoskeletal symptoms were higher among younger nurses, having smaller space under the desk, and feeling uncomfortableness of the chair. The ophthalmologic symptoms were higher among those with a bachelor's degree, younger nurses, and those having a light reflection on the computer monitor, and those maintaining less than 40cm between eyes and the monitor. Higher dermatologic symptoms were observed among younger nurses and those using unclear monitor. The psychological symptoms were higher among younger nurses, those having a light reflection on the monitor, those unable to control the height of their chair, and those using uncomfortable chair. The overall symptoms were higher among younger nurses, those having a light reflection on the monitor, and those smaller space under the desk. Conclusion: Primary intervention should be given to those nurses with symptoms of VDT syndrome in order to regain health and prevent further aggravation of the symptoms. In particular, self-care behaviors of the nurses using VDT should be promoted with administrative support.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.229-234
• /
• 2006

There are still some key problems having to be solved in theory and technique applications when GPS is used to monitor the vertical deformation of ground with high precision. Utilizing the GPS technology to monitor the deformation of the land subsidence and ground fissure in Xi'an, this paper puts forward advice that the datum frame of GPS network has significant influence on the precision and accuracy of the vertical deformation results by some research. The co-authors make some theoretical study of the datum error and practice by establishing the datum error models, especially the influence of scale and azimuth datum errors on GPS monitoring network. Then the datum frame design methods and arithmetic of GPS monitoring network are presented and have taken a good effect.

• Fashion, Industry and Education
• /
• 제15권2호
• /
• pp.1-10
• /
• 2017

The purposes of this study were to explore (1) how fit reviews differ among height groups and (2) how overall numerical ratings differ depending on height groups and ifferent types of fit reviews. Content analysis was used to analyze systematically sampled online consumer reviews (OCRs) of formalwear dresses rented online. In part 1, 201 OCRs were analyzed to develop the coding scheme, which included three aspects of fit (physical, aesthetic, and functional), valence (negative, neutral, positive), and overall numerical rating. In part 2, 600 OCRs were coded and statistically analyzed. Differences in frequency were not found among height groups for any types of mentions (negative, neutral, and positive) in terms of the three aspects of fit in the OCRs. Differences in overall mean ratings were not found among height groups. Interestingly, valence of each aspect of fit reviews affected mean numeric ratings. This study is new in examining relationships among textual information (i.e., fit reviews), numerical information (i.e., numerical rating), and reviewer's characteristic (i.e., height). The results of this study offered practical implications for etailers and marketers that they should pay attention to the three aspects of fit reviews and monitor garments with negative fit evaluations for lower ratings. They may attempt to increase ratings by providing customers recommendations to get a better fit.

• 대한정형도수물리치료학회지
• /
• 제22권2호
• /
• pp.29-33
• /
• 2016

Background: The purpose of this study was to investigate the difference of height cognition ability according to dominant or non-dominant eye. Methods: Forty one healthy adults (male: 19, female: 22, 22-43 years) participated in this study. Hole in the card test was performed to identify dominant eye. To figure out height cognition ability between dominant and non-dominant eye, we had subjects answer which point is higher or even on the monitor. Results: The Right answer on dominant eye was $8.15{\pm}1.44$ point and the right answer on non-dominant eye was $7.56{\pm}1.55$ point. There was a statistically significant difference between dominant eye group and non-dominant eye group (p<.05). Conclusion: We think that the dominant eye may be used for reliable diagnosis. In future study, investigate on relation between dominant hand and dominant eye and the difference of dominant eye and non-dominant eye when to palpation are required.

• 대한원격탐사학회지
• /
• 제28권3호
• /
• pp.307-318
• /
• 2012

To understand forest structures, the Geoscience Laser Altimeter System (GLAS) instrument have been employed to measure and monitor forest canopy with feasibility of acquiring three dimensional canopy structure information. This study tried to examine the potential of GLAS dataset in measuring forest canopy structures, particularly maximum canopy height estimation. To estimate maximum canopy height using feasible GLAS dataset, we simply used difference between signal start and ground peak derived from Gaussian decomposition method. After estimation procedure, maximum canopy height was derived from airborne Light Detection and Ranging (LiDAR) data and it was applied to evaluate the accuracy of that of GLAS estimation. In addition, several influences, such as topographical and biophysical factors, were analyzed and discussed to explain error sources of direct maximum canopy height estimation using GLAS data. In the result of estimation using direct method, a root mean square error (RMSE) was estimated at 8.15 m. The estimation tended to be overestimated when comparing to derivations of airborne LiDAR. According to the result of error occurrences analysis, we need to consider these error sources, particularly terrain slope within GLAS footprint, and to apply statistical regression approach based on various parameters from a Gaussian decomposition for accurate and reliable maximum canopy height estimation.

• 대한임베디드공학회논문지
• /
• 제6권5호
• /
• pp.273-280
• /
• 2011

In this paper, we describe the structural reinforcement approach of the throwing-type firefighter assistance robot which can be thrown into a fire site to monitor inside the place and search trapped people while ensuring a firefighter's safety. The reinforcement design is focused on high strength with low weight for the robot. The in-depth structural analysis of the platform is carried out to track down the weakest part, especially with the 1.8m height of drop test. The analysis is verified by comparing with the 1.8m height of the drop test of the throwing-type firefighter assistance robot. The optimal approach for improving the strength of the weakest part aims at topological equivalent and equivalently stress distributed shape.