• Journal of Industrial Technology
• /
• v.6
• /
• pp.3-7
• /
• 1986

Multicharacteristic quality control is concerned with monitering production processes and inspecting the quality of a lot when the state of a process or the quality of an item is determined by a number of quality characteristics. This paper reviews procedures currently available for multicharacteristic quality control when the quality characteristics are either variables or attributes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.375-383
• /
• 2011

Recent advances in digital technology and diversified internet services have resulted in a rapid growth of research on monitering systems using embedded web servers in USN systems. In designing USN systems equipped with wireless sensor modules requiring extra power for heating sensors for their appropriate operations, excessive power consumption introduces inefficiency to the entire system. In this paper, using embedded systems in web environment, we develop a remote-monitoring system with VOC (Volatile Organic Compounds) sensor signal, and propose a real time method of processing sensor-data streams by way of the serial bus from the sensor module in the USN system. The proposed system has an advantage of monitering the harmful gases on real-time basis and can be used semi-permanently by providing the sensor module with power through the serial bus. The harmful gas to be detected by the VOC sensor module is Toluene and the sensor module is composed of TGS-2602 VOC(Volatile Organic Compounds) sensors of FIGARO. The detected signal is transferred to the embedded web server using the RS-485 serial communication device. The proposed remote VOC monitering system is designed to coordinate in such a way that the VOC sensor module and embedded web server (EMPOS-II) work together effectively for real time monitering of harmful gases on the web at any places where the internet is connected.

• Korean Journal of Environment and Ecology
• /
• v.31 no.1
• /
• pp.93-103
• /
• 2017

The purpose of this study is to assess the recovery rate of vegetation structure after restoration works at the damaged Nogodan area in Jirisan National Park. Fourteen monitoring plots were set up at restoring work area and twelve control plots were set up at natural forest near monitoring plots. Flora, Relative Importance Percentage and Similarity Index were analyzed. Mean Similarity Index between monitering plot and control plot near helliport area showed thirty five point two percent and height of shrub layer recovered up to twenty percent, approxomately durindg twenty three years after experimental restoration works. Mean Similarity Index between monitering plot and control plot around Nogodan peak area showed seventeen point six percent but height of shrub layer recovered up to twenty percent, approxomately during ninteen years after restoration works. Mean similarity index between monitering plot and control plot on transfered millitary area showed thirty four point three percent but coverage of shrub layer showed twenty percent,approxomately during seven years after restoration works. Long term monitering shall be necessary for developing assessment criteria of ecologial restoration and ecological restoration technology.

• Journal of Industrial Convergence
• /
• v.13 no.3
• /
• pp.57-76
• /
• 2015

The purpose of this paper is to examine the moderate effects of self monitoring and the ways of thinking on the relationships and the moderate effects of brand credibility and brand attachment on the relationships between the negative information about a brand and the customer attitude holistic and analytic on the relationships between the negative information about a brand and customer attitude. To accomplish these purposes, this research divided negative information about a brand into corporate ability and corporate social responsibility. In addition, research also divided product type into functional product and symbolic product. participants are classified as having Low or High self monitoring. and the ways of thinking divided into holistic and analytic on the relationships between the negative information about a brand and customer attitude. The following are the summary of hypothesis test: (1)the consumers with low(high) level of self monitering are more likely to reveal high level of preference for negative information of corporate ability. (2)the consumers with analytic(holistic) ways of thinking are more likely to reveal high level of preference for negative information of corporate ability. (3)the consumers with low(high) level of self monitering are more likely to reveal high level of preference for functional product. (4)the consumers with analytic(holistic) ways of thinking aren't more likely to reveal high level of preference for functional(symbolic) product.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.7
• /
• pp.671-676
• /
• 2016

This study is about design for the Rotational Instrument of the Industry factory which is used management safety and maintenance. We developed the multichannel vibration monitering system of the self-diagnosis for middle level CMS(Condition Monitoring System) market, and that system are new features to the expandability and flexibility. Normally one channel is used for treating one signal, but developed instrument can treat four channel with one signal processing card. One rack have redundant power supply and displace and it can check vibration measurement value in field without computer. Bearing fault detection is fundamental of vibration surveillance, but sometimes can not check with vibration velocity and acceleration. So it need the filtering and the amplitude modulation on the acceleration enveloping technology when irregular vibration is happened. We developed the vibration analysis instrument which is applied such technology. And the development prototype shows activated within the vibration error limit.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.8
• /
• pp.1581-1586
• /
• 2016

In this paper, we propose a central disaster monitoring system of the forest fire. This system provides the safe-zone and detection to reduce the suppression efforts. In existing system, it has a few providing the predicting of wildfire spread model and speed through topography, weather, fuel factor. This paper focus on the forest fire diffusion model and predictions of the path identified to ensure the safe zone. Also we have considering the forest fire of moving direction and speed for fire suppression and monitering. The proposed algorithm could provide the technique to analyze the attribute information that temperature, wind, smoke measured over time. This proposed central observing monitoring system could provide the moving direction of spred out forecast wildfire. This observing and monitering system analyze and simulation for the moving speed and direction forest fire, it could be able to predict and training the forest fire fighters in a given environment.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1547-1549
• /
• 1994

In recent years, fiberoptic technology is becoming indispensable in establishing communication networks due to its low loss, high capacity and non-inductive properties. In the power industry as well, the technology is being required to cable and facility monitering, and control system. But, duct in the manhole and space in the culvert are required to fiberoptic cable that is separated from power cable. Therefore, some cable makers and R&D has been studying the composite fiber/power cables. This report introduces the outline of ABF system, construction and properties of optical composite power cable that used ABF technology.

• Journal of Drive and Control
• /
• v.17 no.4
• /
• pp.15-22
• /
• 2020

With the need for efficient maintenance technology to reduce maintenance costs for steel bridges, repainting robots are being developed to automate the work in narrow and poor bridge spaces. The repainting robot is equipped with a blasting module to remove paint layers and contaminants. This study developed a prototype monitoring module to be mounted on the repainting robot. The monitoring module analyzes the condition of the painting surface through a camera installed in the front, guides the direction of movement of the robot, and provides the operator with a video to check the working status after blasting through a camera installed in the back. Various image visibility enhancement technologies were applied to the monitoring module to overcome worksite challenges where incomplete lighting and dust occurs.

• Journal of Advanced Navigation Technology
• /
• v.14 no.6
• /
• pp.824-830
• /
• 2010

PLC_Zigbee system, implemented in a previous study, uses ZigBee Node based on PLC (Power Line Communication). The weak point of the system is that the long distance powerline communication and PLC is impossible to use in the areas where the powerline is not installed. In this paper, we added CDMA (Code Division Multiple Access) module using a data transfer method of SMS (Short Message Service) and XBee of WSN (Wireless Sensor Network) module to the previous system, and got around the restriction of place and environment of PLC system through the interfacing of each communication media. We, thus, implemented a wide range of real monitoring system.

• Journal of Drive and Control
• /
• v.19 no.1
• /
• pp.1-7
• /
• 2022

Recently, a re-painting robot was developed to semi-automatically conduct blasting work in bridge spaces to improve work productivity and worker safety. In this study, a vision sensor-based monitoring module was developed to automatically move the re-painting robot along the path. The monitoring module provides direction information to the robot by analyzing the boundary between the painting surface and the metal surface. To stably measure images in unstable environments, various techniques for improving image visibility were applied in this study. Then, the driving performance was verified in a similar environment.