• 한국농공학회지
• /
• 제30권3호
• /
• pp.58-68
• /
• 1988

Most of the Korean watersheds are mountaineous and consist of various soil types and land uses And seldom watersheds are found to have long term hydrologic records. The SNUA, a hydrologic watershed model was developed to meet the unique characteristics of Korean watershed and simulate the storm hydrographs from a small mountaineous watershed. Also the applicability of the model was tested by comparing the simulated storm hydrographs and the observed from Dochuk watershed, Gwangjugun, Kyunggido The conclusions obtained in this study could be summarized as follows ; 1. The model includes the simulation of interception, evaporation and infiltration for land surface hydrologic cycle on the single storm basis and the flow routing features for both overland and channel systems. 2. Net rainfall is estimated from the continuous computation of water balance at the surface of interception storage accounting for the rainfall intensities and the evaporation losses at each time step. 3. Excess rainfall is calculated by the abstraction of infiltration loss estimated by the Green and Ainpt Model from the net rainfall. 4. A momentum equation in the form of kinematic wave representation is solved by the finite differential method to obtain the runoff rate at the exit of the watershed. 5. The developed SNUA Model is a type of distributed and event model that considers the spatial distribution of the watershed parameters and simulates the hydrograph on a single storm basis. 6. The results of verification test show that the simulated peak flows agree with the observed in the occurence time but have relative enors in the range of 5.4-40.6% in various flow rates and also show that the simulated total runoff have 6.9-32% of relative errors against the observed. 7. To improve the applicability of the model, it was thought that more studies like the application test to the other watersheds of various types or the addition of the other hydrologk components describing subsurface storages are needed.

• 대한기계학회논문집B
• /
• 제36권6호
• /
• pp.639-646
• /
• 2012

가열된 동축류 공기에서 일산화탄소/수소의 층류 제트에 대한 자발화된 부상화염의 특성을 조사하였다. 그 결과로 자발화가 발생하지 않는 영역에서는 제트속도의 증가에 따라 노즐부착화염에서 안정화된 층류 부상화염을 거치지 않고 바로 화염날림이 발생하였다. 자발화 영역에서, 질소 희석된 일산화탄소의 자발화된 부상화염은 산화제 내의 함유된 수분에 따른 점화지연시간의 변동으로 그 부상높이가 크게 영향을 받았다. 그리고 수소에 의한 저온 자발화 영역에서 자발화된 부상화염은 제트속도의 증가에 따라 부상높이가 감소하다가 증가하는 독특한 현상이 발생하였다. 점화지연시간에 의한 자발화된 층류 부상화염의 안정화 메커니즘을 기반으로, 그 부상높이의 거동은 점화 과정에서 발생하는 열손실의 영향뿐만 아니라 연료제트의 운동량과 질량의 선호 확산에 의하여 영향을 받을 수 있다는 것을 확인하였다.

• 대한기계학회논문집A
• /
• 제36권3호
• /
• pp.253-258
• /
• 2012

주조 유동 해석 분야에서 형상 고정 격자계(body-fitted coordinate; BFC)의 적용은 양질의 해석결과를 얻을 수 있음에도 불구하고 격자 생성의 어려움과 효율성으로 인해 많이 사용되지 않고 있다. 반면에 직교 격자계(Cartesian coordinate)는 상대적으로 격자 생성이 쉽고 빠르기 때문에 주조 공정에서 주로 사용되어 왔으나 이 역시 형상을 제대로 표현하지 못함으로써 발생하는 문제들로 인해 올바른 해석 결과를 얻을 수가 없다. 본 연구에서는 PCT(Partial Cell Treatment)를 기반으로 하는 Cut Cell 방법을 직교 격자계에 적용함으로써 이 격자계의 장점은 유지하면서도 정확한 유동 해석 결과를 얻을 수 있었다. Cut Cell 방법으로 간단한 형상의 테스트와 실제 주조 제품에 대한 적용을 해보았다.

• 한국해양공학회지
• /
• 제25권2호
• /
• pp.7-14
• /
• 2011

Numerical simulations were performed for the evaluation of wave and current loads on a fixed cylindrical substructure model for an ocean wind turbine using the ANSYS-CFX package. The numerical wave tank was actualized by specifying the velocity at the inlet and applying momentum loss as a wave damper at the end of the wave tank. The Volume-Of-Fluid (VOF) scheme was adopted to capture the air-water interface. An accuracy validation of the numerical wave tank with a truncated vertical circular cylinder was accomplished by comparing the CFD results with Morison's formula, experimental results, and potential flow solutions using the higher-order boundary element method (HOBEM). A parametric study was carried out by alternately varying the length and amplitude of the wave. As a meaningful engineering application, in the present study, three kinds of conditions were considered, i.e., cases with current, waves, and a combination of current and progressive waves, passing through a cylindrical substructure model. It was found that the CFD results showed reasonable agreement with the results of the HOBEM and Morison's formula when only progressive waves were considered. However, when a current was included, CFD gave a smaller load than Morison's formula.

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.1040-1047
• /
• 1999

The characteristics of flame propagation in inert particle-laden $H_2$/Air premixed gas are numerically investigated on this study. The 2nd order TVD scheme is applied to numerical analysis of governing equations and multi-step chemical reaction model and detailed transport properties are sued to solve chemical reaction terms. Radiation heat transfer is computed by applying the finite volume method to a radiative transfer equation. The burning velocities against the mole fractions of hydrogen agree well with results performed by different workers. The inert particles play significant roles in the flame propagation on account of momentum and heat transfer between gas and particles. Gas temperature, pressure and flame propagation speed are decreased as the loading ratio of particle is increased. Also the products behind flame zone contain lots of water vapor whose absorption coefficient is much larger than that of unburned gas. Thus, the radiation effect of gas and particles must be considered simultaneously for the flame propagation in a mixture of $H_2$/Air and inert particles. As a result, it is founded that because the water vapor emits much radiation and this emitted radiation is released at boundaries as radiant heat loss as well as reabsorbed by gas and particles, flame propagation speed and flame structure are altered with radiation effect.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권1호
• /
• pp.96-101
• /
• 2011

본 연구에서는 수평축 조류발전용 터빈 블레이드 설계 및 성능평가가 가능하도록 블레이드 끝단 손실모델을 고려한 블레이드요소 운동량 이론을 적용하여 설계를 수행함으로써 관련 설계기법을 확립하였고 최종적으로 설계 및 성능평가를 위한 국산 소프트웨어의 개발을 완료하였다. 개발된 성능평가 소프트웨어인 MCT-Blade V2.0을 통해 2MW급 블레이드 설계 및 성능평가를 수행하였으며, ANSYS FLUENT 상용코드를 이용하여 BEMT에 의한 성능평가 결과의 타당성을 검증하였다. 2.5m/s 정격유속에서 BEMT에 의한 기계적 출력은 2,121kW로써 전기적 출력을 만족하였지만, CFD에 의한 기계적 출력은 1,901kW로써 목표출력에 다소 부족한 결과를 보였다.

• 한국항공우주학회지
• /
• 제35권10호
• /
• pp.891-898
• /
• 2007

피치 제어형 수평축 풍력터빈에 대한 공력최적 설계 형상과 피치 변화에 따른 공력 성능 특성을 수치적으로 계산하였다. 수치적 방법은 날개 요소이론을 적용하였으며, Prandtl의 팁 손실 효과, 에어포일의 분포 효과, 후류의 회전 효과 등을 고려하였다. 블레이드 설계에는 총 6개의 서로 다른 에어포일을 사용하였으며, 구조적 강성을 갖기 위해서 허브 측에는 최대 40% 두께비의 에어포일을 분포시켰다. 최적 설계에서 얻어진 비선형 코드 길이는 제작성과 무게 등을 고려하여 선형화 시켰고, 선형화에 따른 공력성능 변화는 무시할만하다는 결과를 얻어내었다. 피치각 변화에 따른 동력성능, 추력성능, 토크 성능 곡선을 비교한 결과 $3^{\circ}$의 피치각 변화에도 민감한 공력 값의 변동이 생김을 알 수 있었고, 정밀한 피치 제어를 위한 각도 제어는 증분이 $3^{\circ}$보다 작은 값으로 피치 제어 알고리즘과 피치 구동 장치가 필요함을 알 수 있었다. 또한 최대 토크는 설계속도비보다 작은 속도비에서 발생되는 결과를 보여주었다.

• 상하수도학회지
• /
• 제23권3호
• /
• pp.345-352
• /
• 2009

The purpose of inlet baffle is to distribute the flow uniformly over the entire cross-sectional area of the sedimentation basin. The goal when designing this baffle is to achieve some head loss while keeping the velocity gradients through the ports equal to the velocity gradient in the end of the flocculator, so as to not break up the flocs. Sedimentation tank performance is strongly influenced by hydrodynamic and physical effects such as inlet design. This study was conducted to evaluate the effect of open ratio of the inlet baffle on hydraulic behavior within a rectangular sedimentation basin using CFD simulation and ADV technique. In order to verify the CFD simulation, we measured the factual velocity at 18 points in the full-scale sedimentation basin at Y water treatment plant. Good agreement was obtained between the CFD predictions and the experimentally measured data. From the simulation results of the existing basin with 7.4 % open ratio, it was investigated that extreme decrease in velocity occurred in the middle of basin. Since then, flow features was unstable. The region which the velocity decrease rapidly moved forward to the flow direction in proportion to the increase of inflow velocity. Also, it was investigated that the flow characteristic of 6.0 % open ratio was significantly different from 7.4 % open ratio at the same configuration condition. These results are a clear indication that inflow momentum and open ratio are the parameters affecting the characteristics of hydraulic patterns. The influence of these parameters on the sedimentation performance requires further study.

• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1611-1625
• /
• 2020

We propose a scaled-down experimental model of vertical air-natural convection channels by applying the modified Ishii-Kataoka scaling method with the assistance of numerical analyses to the Reactor Vault Cooling System (RVCS) of the Proto-type Gen-IV Sodium-cooled fast reactor (PGSFR) being developed in Korea. Two major non-dimensional numbers (modified Richardson and Friction number) from the momentum equation and Stanton number from the energy balance equation were identified to design the scaled-down experimental model to assimilate thermal-hydraulic behaviors of the natural convective air-cooling channel of RVCS. The ratios of the design parameters in the PGSFR RVCS between the prototype and the scaled-down model were determined by setting Richardson and Stanton number to be unity. The friction number which cannot be determined by the Ishii-Kataoka method was estimated by numerical analyses using the MARS-KS system code. The numerical analyses showed that the friction number with the form loss coefficient of 2.0 in the scale-down model would result in an acceptable prediction of the thermal-hydraulic behavior in RVCS. We also performed experimental benchmarking using the scaled-down model with the MARS-KS simulations to verify the appropriateness of the scale-down model, which demonstrated that the temperature rises and the average air flow velocity measured in the scale-down model.

• 한국항공우주학회지
• /
• 제46권5호
• /
• pp.359-367
• /
• 2018

회전익기가 하강 비행 시 발생하는 와류 고리 상태는 회전면 근처에 도넛 모양의 순환유동을 발생시키며, 추력 상실로 인한 기체의 추락을 유발한다. 본 논문에서는 무인 비행체의 종류 중 하나인 쿼드콥터의 와류 고리 상태에서의 유동장을 물리적으로 규명하였다. 한국항공우주연구원 1m 아음속 풍동에서 쿼드콥터의 하강 비행을 모사했으며, 유동장 계측을 위해 입자 영상 유속계(PIV)를 이용했다. 정지 비행 상태의 유도 속도를 운동량이론을 이용하여 추정하고, 이를 통해 와류 고리 상태를 유발할 수 있는 하강 속도의 범위에서 시험을 수행하였다. 또한 하강률에 따른 유동장 계측뿐만 아니라 프로펠러 간의 간격을 달리 주어서도 와류 고리의 발달 및 진행방향을 확인하였다. 더불어 본 연구 결과는 쿼드콥터 주변의 유속 측정을 통해서도 와류 고리 상태를 예측할 수 있다는 것을 보여준다.