• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.4
• /
• pp.403-415
• /
• 2014

Recently, the temperature rise in the summer due to climate change, power usage is increasing rapidly. As a result, power generation facilities have been newly completed and the need for ultra-high-voltage transmission line for power transmission of electricity to the urban area has increased. The mechanized tunnelling method using a shield TBM have an advantage that it can minimize vibrations transmitted to the ground and ground subsidence as compared with the conventional tunnelling method. Despite the popularity of shield TBM for cable tunnel construction, study on the mechanical behavior of cable tunnel driven by shield TBM is insufficient. Thus, in this study, the effect of fractured zone ahead of tunnel face on the mechanical behavior of the shield TBM cable tunnel is investigated. In addition, it is intended to compare the behavior characteristics of the fractured zone with continuous model and applying the interface elements. Tunnelling with shield TBM is simulated using 3D FEM. According to the change of the direction and magnitude of the fractured zone, Sectional forces such as axial force, shear force and bending moment are monitored and vertical displacement at the ground surface is measured. Based on the stability analysis with the results obtained from the numerical analysis, it is possible to predict fractured zone ahead of the shield TBM and ensure the stability of the tunnel structure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.11
• /
• pp.924-933
• /
• 2013

In this paper, we propose a modeling of the broadcasting in the IEEE 802.11p MAC protocol for the VANET(Vehicular Ad hoc Networks). Due to the fact that the beacon message which is needed for the safety services is shared via broadcasting, the analytical modeling of the broadcasting is crucial for the optimum design of the services. Two characteristics specific to the IEEE 802.11p are reflected in the modeling; the time limited CCH interval caused by the channel switching between the CCH and SCH, and no retransmission of the broadcasted messages. In the proposal, we assumed no restriction on the moment of generation of the beacon messages. We allow the messages to be generated and broadcasted within the whole CCH interval. Simulation results prove the accuracy of the proposed modeling. Noticeable improvements are also observed in terms of the performance indices such as the successful delivery ratio, transmission delay, and the variation of the delay.

• Journal of the Korea Convergence Society
• /
• v.6 no.4
• /
• pp.243-248
• /
• 2015

U-Healthcare is a convergence service with medical care and IT which enables to examine, manage and maintain the patient's health any time and any place. For communication conducted in U-Healthcare service, the transmission methods are used that patient's medical checkup analysis results or emergency data are transmitted to hospital server using wireless communication method. At this moment when the attacker who executes the malicious access makes DRDoS(Distributed Reflection DoS) attack to U-Healthcare devices or BS(Base Station), various damages occur that contextual information of urgent patients are not transmitted to hospital server. In order to deal with this problem, this study suggests DRDoS attack scenario and countermeasures against DRDoS and converges with Big Data which could process large amount of packets. When the attacker attacks U-Healthcare devices or BS(Base Station), DB is interconnected and the attack is prevented if it is coincident. This study analyzes the attack method that could occur in U-Healthcare devices or BS which are remote medical service and suggests countermeasures against the security threat using Big Data.

• Journal of Nutrition and Health
• /
• v.36 no.3
• /
• pp.255-261
• /
• 2003

Food irradiation has been steadily increasing in many countries in line with increasing international trade and concerns about naturally occurring harmful contaminants in food. Although irradiation provides an excellent safeguard for the consumer by destroying almost 100% of harmful bacteria, it is necessary to ensure the safety of irradiated foods. This study was performed to investigate the effect of an irradiated diet on lipid peroxidation in the plasma, liver, small intestinal mucosa, and lymphocyte DNA damage in mice. Eight-week old ICR mice were assigned to two groups to receive either non-irradiated or irradiated (10 kGy) diets containing 20.38% fish powder and 6.06% sesame seeds for 4 weeks. The resulting changes in the degrees of lipid peroxidation were evaluated based on the level of plasma and liver thiobarbituric acid reactive substance (TBARS), transmission electron micrograph of jejunal mucosa, and free radical-induced oxidative DNA damage in lymphocytes, as measured by alkaline comet assay (single cell gel electrophoresis). The peroxide values of the gamma irradiated diet were measured every week, and the sample for comet assay was taken at the end of the four week experimental period. There was no significant difference in food efficiency ratio between the two groups. The peroxide values of the diet were immediately increased to 35.5% after gamma irradiation and kept on increasing during storage. After 4 weeks, no differences in tissue or plasma TBARS value were observed between the two groups, but epithelial cells of jejumum showed osmiophillic laminated membranous structures, considered as myelin figures,. The oxidative DNA damage expressed as tail moment (TM) increased 30% in the blood lymphocytes of the mice fed the irradiated diet. In conclusion, the comet assay sensitively detected differences in lymphocyte DNA damage after feeding with the irradiated diet for 4 weeks. However, in order to ensure the safety of irradiated foods, it would be more useful to conduct a long-term feeding regimen using an irradiated diet and examine the level of lipid peroxidation and the state of oxidative stress in a greater range of organs.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.505-513
• /
• 2007

Vertical handoff is a new type of handoff in wireless networks. It is issued when a mobile node moves over overlapping wireless networks with each proving a different access bandwidth, transmission latency, and coverage. By issuing the vertical handoff, the mobile node can obtain better network bandwidth. In the sense of TCP throughput, however, the vertical handoff does not always produce positive performance gain, so sometimes it is better for the mobile node to stay at lower bandwidth providing network rather than to select and move to higher bandwidth providing network. In this paper, we analyze TCP throughput for vertical handoff, and propose a new handoff decision scheme which can estimate TCP throughput at the moment of vertical handoff. Based on the estimation, a mobile node can decide to issue vertical handoff to produce better TCP throughput, and we verify the results by simulations.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.3
• /
• pp.149-157
• /
• 2020

Regarding previously-developed drone simulators, it was easy to check their flight stability or controlling functions based on the condition that their weight was fixed from the design. However, the drone is largely classified into two types that is the one with the fixed weight whose purpose is recording video with camera and racing and another is whole weight-variable during flight with loading the articles for delivery and spraying pesticide though the weight of airframe is fixed. The purpose of this thesis is to analyze the structure of drone and its flight principle, suggest dynamics-model-based simulator that is capable of simulating weight-variable drone and develop the simulator that can be used for designing main control board, motor and transmission along the application of weight-variable drone. Weight-variable simulator was developed by using various calculation to apply flying method of drone to the simulator. First, ground coordinate system and airframe-fixing coordinate system were established and switching matrix of those two coordinates were made. Then, dynamics model of drone was established using the law of Newton and moment balance principle. Dynamics model was established in Simulink platform and simulation experiment was carried out by changing the weight of drone. In order to evaluate the validity of developed weight-variable simulator, it was compared to the results of clean flight public simulator against existing weight-fixed drone. Lastly, simulation test was performed with the developed weight-variable simulation by changing the weight of drone. It was found out that dynamics model controlled various flying positions of drone well from simulation and the possibility of securing the optimum condition of weight-variable drone that has flying stability and easiness of controlling.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.1
• /
• pp.51-57
• /
• 2010

In this paper, It propose methods compressing BTC image utilizing data hiding technique. BTC is used to compress general digital image into binary image and applied into application such as printer. Additional information, transferred with binary image, is as big as the size of binary image. Therefore, we wish to reduce the total transmission bandwidth by decreasing the additional information with sustaining the small image degradation. Because typical BTC image doesn't have enough space for data hiding, we adopt Adaptive AMBTC (Absolute Moment BTC) algorithm to produce the binary image, and calculate virtual histogram from created binary image and modify this histogram for reducing the additional information. The proposed algorithm can reduce about 6-11 % of the image file size, compared with the existing BTC algorithm, without making perceptible image degradation.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.2
• /
• pp.101-114
• /
• 2002

The real multimedia application in wide area communication needs the guaranteed performance of communication service. Therefore, the resource is reserved at the moment of traffic burst and the region of connection admission possibility is widened at the basis of maximum cell rate. This of study shows that the end-to-end traffic delay to the traffic of burst state is guaranteed when the total of maximum transmission rate is higher than link speed by using the region of deterministic delay. The network load rate of connection admission can be improved by the inducement of delay bounds consideration each traffic characteristic to guarantee the end-to-end delay of network from single switch. This suggested buffering system using deterministic service do not give any influence to service quality and can guarantee the bounds of end-to-end delay. And it can also reduce the load of network even if the delay is increased according to the burst traffic characteristic. The above suggested system can be applied effectively to the various kinds of general network specification which admit both real time trafnc service and non-real time traffic service.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.143-152
• /
• 2001

A method for miniaturization of microstrip patch antenna without degrading its radiation characteristics is investigated in this paper. It involves perforating the patch to form a microstrip square-ring antenna, and it's BW enhancement is investigated numerically and experimentally. A ring geometry introduces additional parameters to the antenna, and those are used to control impedances, resonance frequencies, and bandwidths. For a single square ring antenna, an increase of the size of perforation increases its input impedance, decreases the resonance frequency, and bandwidths. But it affects little on directivity of the antenna. To match the antenna to a transmission line and also enhance its bandwidth, the ring is stacked by a square patch or another square ring. Also numerically simulated results by the IE3D, and experimental data are compared for proof.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6160-6168
• /
• 2015

Hand hygiene(HH)of the health care personnels(HCPs) was the most effective method to prevent the transmission of healthcare associated infections. This study was conducted to measure and analysis the status of the HH compliance of HCPs. Data were collected by the direct observation methods of the World Health Organizations(WHO) using WHO's HH monitoring tool kits from 25th October to 31th December, 2010. Data were analyzed by descriptive statistics, cross analysis, multiple logistic analysis using the SPSS/PC 21 program. A total of 8,644 opportunities for HH were observed, and the overall HH compliance rate was 94.1%. HH rates of physicians was lowest(83.4%; OR: 0.209, 95%CI:0.174-0.252). HH rates were statistically different by the job titles(p<0.001), WHO's 5 moments(p<0.001). HH rates in registered nurses(p=0.003), and medical technicians(p<0.001) were statistically different by the WHO 5Moments. Jobs specific HH strategies and WHO 5Moments should be developed to increase the HH compliances of the HCPs.