• 한국미생물·생명공학회지
• /
• 제16권2호
• /
• pp.85-91
• /
• 1988

Ruminococcus albus와 Ruminococcus flavefaciens 두 균주를 사용하여 기질 cellulose로부터 균체량과 생성물 형성에 대해서 available electron balance를 적응한 에너지 효율이 검토되었다. 실험 결과로부터 진정수율(true growth yield) 값인 η$_{max}$, η$^{max}_{th}$ 두 값과 유지 계수값인 m$_{e}$ 값이 이론적 접근으로부터 얻어진 값들과 비교 검토되어졌다. 실험치는 $Y^{max}_{ATP}$=10.5g cells/mole ATP 값을 적용한 이론치와 비슷하므로 Ruminococcus albus, Ruminococcus flavefaciens의 $Y^{max}_{ATP}$ 값은 10.5와 비슷한 값을 갖는 것으로 사료되어진다.

• 한국해양환경ㆍ에너지학회지
• /
• 제14권4호
• /
• pp.257-263
• /
• 2011

SBM을 이용하여 2006년 가막만의 담수, 염분, 영양염 등 물질 수지를 산정하였다. 담수유출량은 $-174.2{\sim}72.5{\times}10^3m^3/day$로 나타났으며 개방경계에서의 해수 교환에 의한 mixing volume은 $-2.4{\times}10^7\sim4.9{\times}10^7m^3/day$로 만 내외의 염분차이에 의해 크게 좌우 받았다. 육상기인 DIP와 DIN의 유입 flux의 범위는 397.0~1158 mole/day 및 1750~8328 mole/day의 범위로 다른 지역에 비해 낮았다. DIP의 소실 또는 생성은 물수지의 변동에 의해 크게 좌우 되는 특징을 보였으며, 또한, 물질체류시간에 의해 물질수지가 크게 좌우되어 NEM도 크게 달라지는 결과를 보였다.

• 대한화학회지
• /
• 제16권3호
• /
• pp.157-165
• /
• 1972

Ammonium metavanadate의 熱分解過程을 spring balance와 示差熱分析에 의하여 調査하였다. 分解는 $180^{\circ}C{\sim}220^{\circ}C$와 $310^{\circ}C{\sim}330^{\circ}C$이 두 溫度範圍에서 일어나며 最終生成物은 $V_2O_5(orange yellow)$임을 알았다. 第一段階分解는 $NH_3$와 $H_2O$가 2:1의 比로 放出되는 過程임을 $NH_3$의 定量, omegatron mass spectrometer에 의하여 알았으며, 第二段階의 分解는 $NH_3,\;H_2$)外에 N2도 放出된다는 것을 gas chromatography, omegatron mass spectrometer에 의하여 認知하였다. 分解生成物을 X-ray 回折에 의하여 分析한 結果는 空氣中에서의 分解生成物은 $V_2O_5$의 組成을 가진 것이 生成되었음을 確認하였다. 또한 $NH_4VO_3$ 熱分解에 있어서의 活性化에너지는 各各 41.4 kcal/mole 64.4 kcal/mole의 값을 갖었음을 알았다.

• 한국산학기술학회논문지
• /
• 제3권2호
• /
• pp.141-145
• /
• 2002

이온교환수지탑으로 유입된 이온은 연속적인 이온교환 평형을 이루면서 수지층을 통과한다는 가정하에 질량작용법칙과 몰 균형식을 조합하여 연속이은교환평형 칼럼모델을 개발하였다. 연속이온교환평형 칼럼모델을 이용하여 원자력발전소 복수탈염설비 탈염기의 성능을 평가한 결과, Na/sup +/및 Cl/sup -/누출 농도는 수지의 재생효율에 따라 다르며, 특정이온의 유입수 및 유출수에서 농도 비율은 용액 및 수지의 상태에 따라 달라짐을 확인하였다. 본 모델은 수지농도를 보정하여 국부 불완전 평형을 고려할 수 있고, 다성분 존재하의 경쟁적 이온교환을 묘사할 수 있는 장점을 가지고 있다.

• 공업화학
• /
• 제10권3호
• /
• pp.432-437
• /
• 1999

폴리에틸렌 열분해실험을 반응기 크기가 $10cm^3$인 스테인레스 스틸 반응기에서 수행하였으며 이때 반응온도는 $390{\sim}450^{\circ}C$이었다. 열분해생성물인 반응생성물과 기체생성물을 분리하여 채취하였고 각 생성물의 분자량분포는 HPLC-GPC와 GC분석을 통해 얻었다. 열분해반응의 개시-종료, 전파-비전파반응, 즉 수소탈취반응, 사슬절단, 고분자물질과 라디칼과의 결합반응 등을 설명할 수 있는 random, specific 생성물의 분자랑분포에 대한 distribution balance식을 제안하였다. 말단절단 과정에 의해 저분자량의 비응축성 기체생성물 (C1~C5)이 생성되었으며 이 기체생성물의 평균분자량은 38이었다. 무작위절단과 말단절단의 속도매개변수 중의 하나인 활성화에너지는 각각 35, 17 kcal/mole 이었다.

• 한국연소학회지
• /
• 제7권2호
• /
• pp.1-6
• /
• 2002

Characteristics of laminar lifted flames of propane highly-diluted with nitrogen have been investigated at various temperatures of coflow air. At various fuel mole fractions, the base of laminar lifted flames has the structure of tribrachial (or triple) flame. The liftoff heights are correlated well with the stoichiometric laminar burning velocity considering initial temperature at a given coflow velocity. It shows that lifted flames are stabilized on the basis of the balance mechanism between local flow velocity and the propagation speed of tribrachial flame, regardless of the temperature of coflow and fuel mole fraction. Lifted flames exist for a jet velocity even smaller than the stoichiometric laminar burning velocity, and liftoff velocity increases more rapidly than stoichiometric laminar burning velocity as coflow temperature increases. These can be attributed to the buoyancy effect due to the density difference.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제20회 KOSCO SYMPOSIUM 논문집
• /
• pp.9-15
• /
• 2000

Characteristics of lifted flames for highly diluted propane and methane with nitrogen in coflowing air is experimentally investigated. In case of propane, for various fuel mole fractions and jet velocities, three distinctive types of flames are observed; nozzle attached flames, stationary lifted flames, and oscillating lifted flames. When fuel jet velocity is much smaller than coflow velocity, the base of nozzle attached flame has a tribrachial structure unlike usual coflow difusion flames. Based on the balance mechanism of the propagation speed of tribrachial flame with flow velocity, jet velocity is scaled with stoichiometric laminar burning velocity. Results show that there exists two distinctive lifted flame stabilization; stabilization in the developing region and in the developed region of jets depending on initial fuel mole fraction. It has been found that lifted flame can be stabilized for fuel velocity even smaller than stoichiometric laminar burning velocity. This can be attributed to the buoyancy effect and flow visualization supports it. Lifted flames are also observed for methane diluted with nitrogen. The lifted flames only exist in the developing region of jet.

• 자원리싸이클링
• /
• 제12권3호
• /
• pp.38-45
• /
• 2003

화학평형, 물질수지 및 전기적 중성식을 고려하고 Bromley식으로 용질들의 활동도계수를 구하여 염산용액에서 염화니켈의 이온평형을 해석하였다. 본 연구에서 고려한 조성범위에서 니켈을 함유한 화학종의 대부분은 $Ni^{2+}$ 와 $NiCl^{+}$ 로 존재하고 니켈수산화물의 농도분율은 매우 낮으나, 용액의 pH가 증가함에 따라 $Ni_4$ $(OH)_{4}^{4+}$ 의 농도분율은 급격히 증가하였다. $NiCl_2$ $-HCl-NaOH-H_2$O 계에 대해 전해질의 농도를 변화시키며 $25^{\circ}C$에서 측정한 pH값과 계산값은 이온강도 9.4m정도의 범위까지 서로 잘 일치하였다.

• Journal of Biosystems Engineering
• /
• 제2권1호
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

• Current Research on Agriculture and Life Sciences
• /
• 제32권4호
• /
• pp.199-202
• /
• 2014

The bioconversion of cellulosic biomass hydrolyzates consisting mainly of glucose and xylose requires the use of engineered Saccharomyces cerevisiae expressing a heterologous xylose pathway. However, there is concern that a fungal xylose pathway consisting of NADPH-specific xylose reductase (XR) and $NAD^+$-specific xylitol dehydrogenase (XDH) may result in a cellular redox imbalance. However, the glycerol biosynthesis and glycerol degradation pathways of S. cerevisiae, termed here as the glycerol cycle, has the potential to balance the cofactor requirements for xylose metabolism, as it produces NADPH by consuming NADH at the expense of one mole of ATP. Therefore, this study tested if the glycerol cycle could improve the xylose metabolism of engineered S. cerevisiae by cofactor balancing, as predicted by an in-silico analysis using elementary flux mode (EFM). When the GPD1 gene, the first step of the glycerol cycle, was overexpressed in the XR/XDH-expressing S. cerevisiae, the glycerol production significantly increased, while the xylitol and ethanol yields became negligible. The reduced xylitol yield suggests that enough $NAD^+$ was supplied for XDH by the glycerol cycle. However, the GPD1 overexpression completely shifted the carbon flux from ethanol to glycerol. Thus, moderate expression of GPD1 may be necessary to achieve improved ethanol production through the cofactor balancing.