• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.132-137
• /
• 2002

The mold transformers have been widely used in underground substations in large building and have some advantages in comparison to oil-transformer, that is low fire risk, excellent environmental compatibility, compact size and high reliability. In addition, the application of mold transformer for outdoor is possible due to development of epoxy resin. The mold transformer generally has cooling duct between low voltage coil and high voltage coil. A mold transformer made by one body molding method has been developed for small size and low loss. The life of transformer is significantly dependent on the thermal behavior in windings. To analyse winding temperature rise, many transformer designer have calculated temperature distribution and hot spot point by finite element method(FEM). Recently, numerical analyses of transformer are studied for optimum design, that is electric field analysis, magnetic field, potential vibration, thermal distribution and thermal stress. In this paper, the temperature distribution of 50 kVA pole mold transformer for power distribution are investigated by FEM program and the temperature rise test of designed mold transformer carried out and test result is analyzed compare to simulation data. In this result, the designed mold transformer is satisfied to limit value of temperature and the other property is good such as voltage ratio, winding resistance, no-load loss, load loss, impedance voltage and percent regulation.

• The Korean Journal of Pesticide Science
• /
• v.21 no.1
• /
• pp.90-96
• /
• 2017

Gray mold disease, cause by Botrytis cinerea, occurs severe damage on varieties of fruit and vegetable production, and have no a critical control method. In case of chemicals control, it is a trigger emergence of drug resistance strains due to using them continuously. In addition, the pathogen is difficult to control naturally because it is possible to survive regardless of host status. In this study, microorganisms were isolated from tomato flower and hive samples and in order to select suitable microbial control agents for tomato gray mold disease. During six-months study, we isolated 1,004 isolates from flower and 925 isolates from pollinator hive samples. Among them, 6 strains were selected based on result of antifungal activity test. The selected strains showed not only strong antifungal activity against gray mold pathogen, but also cellulase and protease enzyme activities. The selected strains were identified as Paenibacillus polymyxa. In plant assay, P. polymyxa prevented the gray mold disease occurrence near 75%.

• Mycobiology
• /
• v.39 no.1
• /
• pp.52-53
• /
• 2011

Gray mold of blueberry caused by Botrytis sp. is reported for the first time in Korea. A detailed description of the fungus is given, along with its rDNA internal transcribed spacer sequence. The fungus was identified as Botrytis cinerea based on mycological characteristics and molecular data.

• Design & Manufacturing
• /
• v.17 no.1
• /
• pp.7-12
• /
• 2023

Recently, with the emergence of the 4th industrial revolution, the demand for smart factories and factory automation is increasing. In this study, a tool life prediction program was developed to select optimal machining conditions using CNC milling equipment, which is widely used in flexible production and automation. The equipment used in the experiment was Hwacheon Machine Tool's 5-axis machining equipment, and the tool used was a 17F2R tool. For the machining path, the down-milling cutting method was selected and long-term machining was performed. The analysis standard for side wear on the tool was set at 0.1 to 0.2 mm, and tool life data and wear data were obtained in the cutting experiment. The program was created through the data obtained from the experiment, and a prediction rate of over 90% was secured when comparing the experimental data and the predicted data.

• The Plant Pathology Journal
• /
• v.17 no.6
• /
• pp.370.3-370
• /
• 2001

• Journal of Mushroom
• /
• v.16 no.3
• /
• pp.170-174
• /
• 2018

This study aims to investigate the antifungal and protective effects of water- and 70% methyl alcohol-extracts from spent mushroom substrate (WESMS and MeOHSMS) of Lentinula edodes, on Botrytis cinerea- the causative agent for gray mold disease in ginseng. MeOHSMS inhibited mycelial growth and spore germination of Botrytis cinerea, by 75% and 95%, respectively. MeOHSMS could suppress gray mold disease of ginseng seedlings by 80% and effectively reduce the disease severity by 60%. Compared to the treatment of ginseng leaves with WESMS and DL-${\beta}$-aminobutyric acid (BABA), the MeOHSMS treatment increased the phenolic compounds in the leaves by 36% and 18%, respectively. These results suggest that the SMS extracts suppress gray mold disease in ginseng via dual functions: antifungal activity and increase in a plant defense factor-phenolic compounds.

• The Plant Pathology Journal
• /
• v.19 no.5
• /
• pp.266-268
• /
• 2003

In 2002, sooty mold was observed on persimmon (Diopyros kald) from the Jinju Agricultural Products Wholesale Market in Gyeongnam, Korea. The lesion of the sooty mold usually appeared as scars or wounds formed on the surface of the fruits. The symptom started with water soaking lesion, then the fruit softened rapidly. Colony of the causal pathogenic fungus was dark green in color on potato dextrose agar. The diameter of growing hyphae was 1-2 $\mu\textrm{m}$. The mostly one-celled conidia were ovoid, lemon or cylinder in shape, blastophores, and sized 46-132 $\mu\textrm{m}$. Erected conidiophores were long-branched chains and their lengths varied from 24 to 346 $\mu\textrm{m}$ with 2-5 $\mu\textrm{m}$ width. The optimum temperature for mycelial growth was about 2$0^{\circ}C$. Based on their mycological characteristics, the fungus was identified as Cladosporium cladosporioides. This is the first report in Korea of the sooty mold of persimmon caused by the said fungus.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.3
• /
• pp.348-352
• /
• 2004

The mold transformers have been widely used in underground substations in large building and have some advantages in comparison to oil-transformer, that is low fire risk, excellent environmental compatibility, compact size and high reliability. In addition, the application of mold transformer for outdoor is possible due to development of epoxy resin. The mold transformer generally has cooling duct between low voltage coil and high voltage coil. A mold transformer made by one body molding method has been developed for small size and ow loss, but it needs some cooling method because heat radiation between each winding is difficult. The life of transformer is significantly dependent on the thermal behavior in windings. Many transformer designers have calculated temperature distribution and hot spot point by finite element method(FEM) to analyze winding temperature rise. In this paper, The thermal analysis of pole mount mold transformer with one body molding by duct condition is investigated and the test result of temperature rise is compared with simulation data.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.6
• /
• pp.36-42
• /
• 2012

The empty fruit bunch fibers(EFB) of oil palm were examined for optimal utilization of the EFB fibers. The EFB fibers were obtained by shredding EFB, followe by removal of fines. The surface properties of the fibers were modified with various pre-treatments, such as hot water extraction, the soaking treatments with NaOH, $ClO_2$ and n-hexane. The changes in the fiber surface were examined with FT-IR method, which showed the changes in chemical compositions such as pectin, lignin, and etc. according to the pre-treatment methods. And the z-directional tensile testing of the fiber mold made of the treated EFB fibers showed the changes in the bonding strength by the pre-treatments. The fiber mold made of EFB fibers treated with $ClO_2$ showed the greater increase in the tensile energy absorption although the NaOH treatment resulted in the severer impact on the EFB fibers.

• Research in Plant Disease
• /
• v.20 no.3
• /
• pp.182-188
• /
• 2014

Because bacterial isolates from only a few genera have been developed commercially as biopesticides, discovery and characterization of novel bacterial strains will be a key to market expansion. Our previous screen using plant bioassays identified 24 novel biocontrol isolates representing 12 different genera. In this study, we characterized the 3 isolates showing the best biocontrol activities. The isolates were Pantoea dispersa WCU35, Proteus myxofaciens WCU244, and Exiguobacterium acetylicum WCU292 based on 16S rRNA sequence analysis. The isolates showed differential production of extracellular enzymes, antimicrobial activity against various fungal or bacterial plant pathogens, and induced systemic resistance activity against tomato gray mold disease caused by Botrytis cinerea. E. acetylicum WCU292 lacked strong in vitro antimicrobial activity against plant pathogens, but induced systemic resistance against tomato gray mold disease. These results confirm that the trait of biological control is found in a wide variety of bacterial genera.