• 구강회복응용과학지
• /
• 제21권2호
• /
• pp.169-182
• /
• 2005

The purpose of this study was to compare the stress distribution around the surrounding bone according to the splinted and non-splinted conditions on the finite element models of the two implant crowns with the different vertical bone level. The finite element model was designed with the parallel placement of the two fixtures ($4.0mm{\times}11.5mm$) with reverse buttress thread on the mandibular 1st and 2nd molars. As the bone quality, the inner cancellous bone and the outer 2 mm cortical bone were designed, and the cortical and cancellous bone were assumed to be perfectly bonded to the implant fixture. The splinted model(Model 1) had 2 mm contact surface and the non-splinted model(Model 2) had $8{\mu}m$ gap between two implant crowns. Two group (Splinted and non-splinted) was loaded with 200 N magnitude in the vertical and oblique directions on the loading point position on the central position of the crown, the 2 mm and 4 mm buccal offset point from the central position. Von Mises stress value was recorded and compared in the fixture-bone interface in the bucco-lingual and mesio-distal sections. The results were as follows; 1. In the vertical loading condition of central position, the stress was distributed on the cortical bone and the cancellous bone around the thread of the fixture in the splinted and non-splinted models. In the oblique loading condition, the stress was concentrated toward the cortical bone of the fixture neck, and the neck portion of 2nd molar in the non-splinted model was concentrated higher than that of 1st molar compared to the splinted model. 2. In the 2 mm buccal offset position of the vertical loading compared to the central vertical loading, stress pattern was shifted from apical third portion of the fixture to upper third portion of that. In the oblique loading condition, the stress was distributed over the fixture-bone interface. 3. In the 4 mm buccal offset position of the vertical loading, stress pattern was concentrated on the cortical bone around the buccal side of the fixture thread and shifted from apical third portion of the fixture to upper third portion of that in the splinted and non-splinted models. In the oblique loading, stresses pattern was distributed to the outer position of the neck portion of the fixture thread on the mesio-distal section in the splinted and non-splinted models. Above the results, it was concluded that the direction of loading condition was a key factor to effect the pattern and magnitude of stress over the surrounding bone of the fixture under the vertical and oblique loading conditions, although the type with or without proximal contact did not effect to the stress distribution.

• Imaging Science in Dentistry
• /
• 제38권3호
• /
• pp.169-176
• /
• 2008

Purpose : To assess the diagnostic accuracy and value in an imaging technique field through the comparison of cone beam computed tomography and conventional panoramic radiography in assessing the topographic relationship between the mandibular canal and impacted third molars. Materials and Methods : Participants consisted of 100 patients offered the images through cone beam computed tomography and panoramic radiography. PSR-$9000^{TM}$ Dental CT system (Asahi Roentgen Ind. Co., Ltd, Japan) was used as the unit of cone beam computed tomography. CE-II (Asahi Roentgen Ind. Co., Ltd, Japan) and Pro Max (Planmeca Oy, Finland) were used as the unit of panoramic radiography. The images obtained through panoramic radiography were classified into 3 types according to the distance between mandibular canal and root of mandibular third molar. And they were classified into 4 types according to the proximity of radiographic feature. The images obtained through cone beam computed tomography based on the classification above were classified into 4 types according to the location between the mandibular canal and the root and were analyzed. And they were classified into buccal, inferior, lingual, and between roots, according to the location between mandibular canal and root. The data were statistically analyzed and estimated by $X^2$-test. Results : 1. There was no statistical significance according to 3 types (type I, type II, type III) through CBCT. 2. The results of 4 types (type A, type B, type C, type D) through CBCT were as high prevalence of CBCT 1 in type A, CBCT 2 in type B, CBCT 3 in type C, and CBCT1 in type D and those of which showed statistical significance (P value=0.03). 3. The results according to location between mandibular canal and root through CBCT recorded each 49, 25, 17, 9 as buccal, inferior, lingual, between roots. Conclusion : When estimating the mandibular canal and the roots through the panoramic radiography, it could be difficult to drive the views of which this estimation was considerable. Thus it is required to have an accurate diagnostic approaching through CBCT that could estimate the location between mandibular canal and roots.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제22권3호
• /
• pp.217-226
• /
• 2022

Background: Intraosseous anesthesia is the process by which an anesthetic solution, after penetration of the cortical bone, is directly injected into the spongiosa of the alveolar bone supporting the tooth. This study aimed to compare the effectiveness of the traditional inferior alveolar nerve block (IANB) and computerized intraosseous anesthesia in the surgical extraction of impacted lower third molars, compare their side effects systemically by monitoring heart rate, and assess patients' a posteriori preference of one technique over the other. Methods: Thirty-nine patients with bilaterally impacted third molars participated in this study. Each patient in the sample was both a case and control, where the conventional technique was randomly assigned to one side (group 1) and the alternative method to the contralateral side (group 2). Results: The traditional technique was faster in execution than anesthesia delivered via electronic syringe, which took 3 min to be administered. However, it was necessary to wait for an average of 6 ± 4 min from the execution to achieve the onset of IANB, while the latency of intraosseous anesthesia was zero. Vincent's sign and lingual nerve anesthesia occurred in 100% of cases in group 1. In group 2, Vincent's sign was recorded in 13% of cases and lingual anesthesia in four cases. The average duration of the perceived anesthetic effect was 192 ± 68 min in group 1 and 127 ± 75 min in group 2 (P < 0.001). The difference between the heart rate of group 1 and group 2 was statistically significant. During infiltration in group 1, heartbeat frequency increased by 5 ± 13 beats per minute, while in group 2, it increased by 22 ± 10 beats per minute (P < 0.001). No postoperative complications were reported for either technique. Patients showed a preference of 67% for the alternative technique and 20% for the traditional, and 13% of patients were indifferent. Conclusion: The results identified intraosseous anesthesia as a valid alternative to conventional anesthesia in impacted lower third molar extraction.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제16권2호
• /
• pp.131-136
• /
• 2016

Background: This study aimed to evaluate the patient's pain and quality of life after suture removal at either 3 or 7 days following the bilateral surgical extraction of impacted lower third molars. Methods: This study was a prospective, randomized controlled clinical trial carried out in 30 patients, who acted as their own control. Each patient required the bilaterally impacted mandibular third molars to be extracted. The impacted teeth were removed and the wound margins were approximated and sutured with black braided silk. The suture material was removed on day 3 on one side and on day 7 on the other. Each participant was asked to complete a questionnaire after the removal of the suture material on each designated day. Results: Regarding overall clinical symptoms, the mean VAS scores of male and female participants on day 3 were not significantly different from those on day 7. A significant difference was found in female participants, in that overall daily activity was better on day 7. There were significant differences in the ability to smile and laugh in both sexes and the ability to chew in the male participants was better on day 7. Conclusions: There were no significant differences in the patient's pain and quality of life between suture removal on day 3 or on day 7 following surgery to remove impacted lower third molars.

• 대한치과교정학회지
• /
• 제31권6호
• /
• pp.559-566
• /
• 2001

본 연구는 설측 이소맹출된 하악 제2대구치의 협측 반대교합을 개선하기 위해 사용되는 mandibular posterior crossbite appliance에 의해 하악 제2대구치의 치근단과 그 주위의 치조골에 발생되는 응력분포를 알아보기 위해 광탄성법을 이용하여 분석하였다. 하악의 치조골을 재현하기 위해 PL-3 형의 epoxy resin과 PL-3 보다 경질인 레진치아를 사용하여 설측 이소맹출된 하악 제2대구치를 광탄성모형으로 재현하였다. 광탄성 모현상에 mandibular posterior crossbite appliance를 적용하고 힘을 가하기 전과후의 응력 분포를 알아보기 위해 원형편광기 를 사용하여 모형의 전후방에서 관찰하였다. 이상의 연구를 통해 얻어진 결과는 다음과 같다. 1. 하악 제2대구치의 협측면에 힘을 가한 경우, 설측 치조정과 치근첨 부위에 응력이 집중되어 나타났고 회전중심이 치근 협측면의 중간 1/3부위와 치근첨 부위에 발생하였으며 이로 인해 제 2대구치에 협측으로의 비조절성 경사이동 및 회전력이 발생하였다. 2. 하악 제2대구치의 설측면에 힘을 가한 경우에는 협측면에 힘을 가한 경우 보다 치근첨에 더 많은 응력이 발생하였다. 또한 치근하방의 치조골 부위에 응력이 증가하였으며 치근의 협측면과 치근첨 부위의 회전중심도 없어져 이로 인한 협측으로의 조절성 경사 이동 및 함입력이 관찰되었다. 3. 하악 제2대구치의 협측이나 설측에 힘을 가한 경우, 고정원인 제1대구치의 치근첨 부위는 힘을 가하기 전의 초기 응력상태와 비교할 때 응력의 증가는 보이지 않아 구치부 협측 반대 교합의 개선시 하악의 설측 호선은 효과적인 고정원으로 사용될 수 있다. 이상의 연구 결과는 설측 이소맹출된 하악 제2대구치의 구치부 협측 반대교합을 개선하기 위해 사용되는 mandibular posterior crossbite appliance를 적용할 때, 제2대구치의 협측면보다는 설측면에서 힘을 부여하는 것이 교합장애를 야기시킬 수 있는 비조절성 경사이동과 구치의 회전을 피하면서 협측으로의 조절성 경사이동 및 함입력을 적용시킬 수 있음을 의미한다.

• 농촌의학ㆍ지역보건
• /
• 제38권1호
• /
• pp.14-24
• /
• 2013

이 연구는 건강보험공단으로부터 획득한 2001년부터 2008년까지 전국 232개 시군구 지역의 분만 및 합병증 청구 자료를 바탕으로 산모가 자신의 거주 지역 내 외에서 출산하는 비율과 산과적 합병증과의 관련성을 밝히기 위한 생태학적 연구이다. 산모가 본인의 거주 지역 밖에서 출산하는 비율인 관외분만율은 정도에 따라 저도 관외분만율 지역, 중등도 관외분만율 지역, 고도 관외분만율 지역으로 범주화하였으며, 산과적 합병증은 '유산, 자궁외 임신 및 기태임신에 따른 합병증율', '유산율', '자간증율'을 구하였다. 관외분만율에 따른 산과적 합병증의 일원배치 분산분석에서 저도 및 중등도 관외분만율 지역보다 고도 관외분만율 지역이 '유산, 자궁외 임신 및 기태임신에 따른 합병증율'과 '자간증율'이 통계적으로 의미있게 증가하는 경향을 보였고(p<0.05), 산과적 합병증 각각을 종속변수로 한 다중선형회귀분석에서 '유산, 자궁외 임신 및 기태임신에 따른 합병증율'은 고도 관외분만율 지역(분만서비스 접근 취약지역)이 기타 지역보다 유의하게 높은 것으로 나타났으며(p<0.01), '자간증율'은 고도 관외분만율 지역에서 그리고 1인당 지방세납입액이 낮은 지역에서 더 높은 것으로 나타났다(p<0.01). 이 연구를 통해 분만서비스 접근 취약지역에 거주하는 산모에서 산과적 합병증이 높음을 나타냈고 따라서 이에 대한 적절한 대책이 세워져야 할 필요성을 시사하고 있다. 특히 응급 대응 및 산전관리의 충실성을 높이기 위한 체계적인 대안이 정책적으로 고려되어야 함을 보여주고 있다. 한편 이 연구는 시군구를 분석 단위로 한 생태학적 연구이므로 산전관리 수진 및 산과적 합병증 발생에 영향을 미치는 개인수준에서의 요인들까지 고려되지 못한 점은 이 연구의 한계점으로 가지고 있다. 따라서 추후 산전관리 및 산과적 합병증에 영향을 미치는 산모 개인수준에서의 요인들까지 고려한 후속연구가 필요하겠다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권6호
• /
• pp.657-664
• /
• 2008

Purposes: The aim of this study was to evaluate pulp healing, periodontal healing, root development of autotransplantation of immature third molars and show its viability in treatment of early loss of tooth in young patients Materials and methods: In this article we performed a retrospective study with 41 transplanted teeth in 36 patients. The Mean age at the time of surgery was 17 years(range $13{\sim}24$ years) and mean postoperative follow up period was 2.4 years(range $1{\sim}6$ years) We evaluated the survival rate, pulp healing, periodontal healing, root development of the above teeth Results: At the last examination 40 teeth among 41 transplants were still present so survival rate was 97.6%. The pulpal healing was found in 38 teeth of 41 transplants. The periodontal healing was found in 38 transplants. The continuous root development was seen in 38 transplants. Conclusions: From the above results, the autotransplantation of immature third molars was found to be a useful and reliable treatment method for early loss of teeth in adolescents and young adults.

• 대한치과의사협회지
• /
• 제47권4호
• /
• pp.211-224
• /
• 2009

This retrospective study was to analyze the inferior alveolar nerve and lingual nerve damage after the removal of mandibular third molars. In this questionnaire study, the subjects chosen for this study were 2472 dentists who answered the questionnaire about numbness after the extraction of lower third molars. The data collected by E-mail and web site included the incidence of removal of the lower third molars, the incidence and the experience of numbness of the inferior alveolar nerve and lingual nerve, rate and duration of recovery, the influence in day life after the long-term sensory loss, the period and amount of the indemnity in the case of medical dispute. The results are summarized as follows. 1. The experience rate and the incidence rate of the inferior alveolar nerve numbness by oral surgeons in the past year were19.9% and 0.14%. Those of the lingual nerve by oral surgeon were 7.7% and 0.05%.2. The experience rate and the incidence rate of the inferior alveolar nerve numbness by the dentists except oral surgeons in the past year were 9.7% and 0.19%. Those of the lingual nerve by the dentists except oral surgeons were 5.5% and 0.11%.3. The recovery rate of the inferior alveolar nerve after 1 year and 2 years were 85.6% and 91.3%. The recovery rate of the lingual nerve after 1 year and 2 years were 84.8% and 89.3%.In conclusion, most of numbness may be recovered within 2 years. However the possibility of long term and persistent numbness should not be neglected. Therefore practitioner must inform the possibility of nerve injury and include this possibility in the consent forms.

• 대한치과마취과학회지
• /
• 제4권1호
• /
• pp.13-16
• /
• 2004

Background: Articaine, a new amide-type local anesthetic, was recently commercially available in Korea. The purpose of this study was to compare the anesthetic efficacy between articaine HCl and lidocaine HCl for the surgical extraction of bilateral mandibular impacted third molars. Patients and Methods: Forty young and healthy patients with bilateral impacted third molars were selected with permission. Randomly, one side of impacted third molar was operated under local anesthesia using 4% articaine and the other side under 2% lidocaine after 1 or 2 week recovery time. Intraoperative pain was evaluated via 0-10 cm visual analog scale (VAS) by both the patient and operator immediately after the operation. After 1 day and 7 days, the complications of local anesthesia were checked. Results: The pain VAS scores in articaine group, evaluated by both the patient and operator, were lower than those in lidocaine group, but they were not statistically significant (P = 0.44 and 0.54, respectively). The incidence of complications of local anesthesia between articaine and lidocaine was similar. Conclusion: In this study, articaine showed at least equal efficacy compared to lidocaine. The further dose-controlled study with more pharmacokinetic parameters will be needed.

• Imaging Science in Dentistry
• /
• 제47권3호
• /
• pp.149-155
• /
• 2017

Purpose: The classification of impacted maxillary third molars(IMTMs) facilitates interdisciplinary communication and helps estimate the degree of surgical difficulty. Thus, this study aimed to develop a 3-dimensional classification of the position and depth of impaction of IMTMs and to estimate their prevalence with respect to gender and age. Materials and Methods: This cross-sectional retrospective study analyzed images in sagittal and coronal cone-beam computed tomography (CBCT) sections of 300 maxillary third molars. The proposed classification was based on 3 criteria: buccolingual position (buccal, lingual, or central), mesial-distal position (mesioangular, vertical, or distoangular), and depth of impaction (low, medium, or high). CBCT images of IMTMs were classified, and the associations of the classifications with gender and age were examined using analysis of variance with the Scheffe post-hoc test. To determine the associations among the 3 classifications, the chi-square test was used (P<.05). Results: No significant association of the classifications with gender was observed. Age showed a significant relationship with depth of impaction (P=.0001) and mesial-distal position (P=.005). The most common positions were buccal(n=222), vertical(n=184), and low (n=124). Significant associations among the 3 tested classifications were observed. Conclusion: CBCT enabled the evaluation of IMTMs in a 3-dimensional format, and we developed a proposal for a new classification of the position and depth of impaction of IMTMs.