• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.167-168
• /
• 2014

It is difficult to expect the service improvements such as increased number of sailing and making new ship due to financial difficulty this is caused by deterioration of island dwellers. In addition, the safety of ship operation is also a problem with the supply of good sailors difficult problem of low wages and lack of safety working environment. T It is necessary to ensure the introduction of public operating system in coastal passenger shipping business to secure the public and safety. There are many practical constraints but if we obtain public sea ways, it will be possible to improve the operating system through the implementation from a subsidized line and taking off business licenses of an insolvent enterprise by enhancing safety control.

• Journal of Navigation and Port Research
• /
• v.34 no.1
• /
• pp.59-64
• /
• 2010

This study is to determine an optimal marina's construction location candidate among many alternative candidates in order to obtain the maximized efficiency under the natural conditions. To deal with marina's construction location, the optimal construction location is selected using 10 important factor analysis for 10 candidates in Yeosu city. In this paper, the new model to assign the most reasonable alternative is introduced using 0-1 integer programming. This proposed model has not been applied in the optimal marina's facility candidate selection problem yet. This paper will contribute to determine the most reasonable alternative. Also, this proposal model can be applied to other marina's facility candidate selection problem in other regions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.157-164
• /
• 2024

In 2020, 24,000 TEU ultra-large container ships began arriving at the Busan New Port. In this study, the wind pressure and hydraulic force acting on the hull were calculated to obtain the horsepower required for the tugboats for safe berthing and unberthing of a 24,000 TEU ultra-large container ship at the Busan New Port. When the wind speed is 10 m/s (20 kts), 13,000 TEU container ships meet the tug horsepower standard of the current Busan port tugboat operation rules, but 16,000 TEU and 24,000 TEU container ships do not satisfy the regulations. Therefore, it was proposed to raise the standards for tugboat use by dividing the size of ships of "G/T 150,000 tons or more," which is the largest vessel under the current tugboat use standards, into two stages. Because 140,000 tons requires 12,100 horsepower, 170,000 tons requires 14,500 horsepower, and 230,000 tons requires 18,000 horsepower, the study proposed 16,000 horsepower for 150,000 to less than 200,000 tons and 18,000 horsepower for 200,000 tons or more for the use of tugboats.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.21-26
• /
• 2005

The work of VLCC SPM mainly is accomplished on the open sea On the open sea as a result of meteorological condition and the ocean wave influence, When the weather condition is get bed, peremptorily moving to the safety place, because of the gale and the billow, almost happened frequently, the pilot is unable to go on board and the tug is also unable to be used Now bemuse of the bad weather the VLCC SPM moving to the other safety place frequently happened in the ulsan port. the construction of new harbor, it constructed many break water around SPM. So that it is necessary to propose the new standard about how to maneuvering area actually. Now our country is at the blank stage about the establishment of SPM research Most of the situations are refer to overseas standard But these standards lack of consistency and clarity. So when moving to the other safety place from SPM, we must carry through the researching and study on the ships using by sailing data of AIS. we must put forward a new standard about maneuvering area of ship in moving at SPM.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.279-283
• /
• 2005

Fisheries Surveillance System (FSS) is to protect fishing farms a thief. To implement the FSS a speacial test system which can be operate at any natural environments in the practical farm fields is needed. This paper describes some up coming results for the implementation of Radar Car as the special test system which consists of small van-type car, commercial Radar system, Radar Scan Converter(RSC) and, computer system. This Radar Car is designed to test the influences of sea clutter according to the height of Radar Scanner and to verify some effects of side-lobe suppression by special materials attached at each side of the Radar scanner. The post digital signal processing of digital radar signal comes from Radar Scan Converter(RSC) is also discussed, then designed and developed a new RSC in this study.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.6
• /
• pp.1081-1088
• /
• 2020

In this paper, the method of detecting sea fog through CCTV image is proposed based on convolutional neural networks. The study data randomly extracted 1,0004 images, sea-fog and not sea-fog, from a total of 11 ports or beaches (Busan Port, Busan New Port, Pyeongtaek Port, Incheon Port, Gunsan Port, Daesan Port, Mokpo Port, Yeosu Gwangyang Port, Ulsan Port, Pohang Port, and Haeundae Beach) based on 1km of visibility. 80% of the total 1,0004 datasets were extracted and used for learning the convolutional neural network model. The model has 16 convolutional layers and 3 fully connected layers, and a convolutional neural network that performs Softmax classification in the last fully connected layer is used. Model accuracy evaluation was performed using the remaining 20%, and the accuracy evaluation result showed a classification accuracy of about 96%.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.3
• /
• pp.235-249
• /
• 2018

The Artificial Neural Network (ANN) model has been known as one of the most effective theories for automatic ship berthing, as it has learning ability and mimics the actions of the human brain when performing the stages of ship berthing. However, existing ANN controllers can only bring a ship into a berth in a certain port, where the inputs of the ANN are the same as those of the teaching data. This means that those ANN controllers must be retrained when the ship arrives to a new port, which is time-consuming and costly. In this research, by using the head-up coordinate system, which includes the relative bearing and distance from the ship to the berth, a novel ANN controller is proposed to automatically control the ship into the berth in different ports without retraining the ANN structure. Numerical simulations were performed to verify the effectiveness of the proposed controller. First, teaching data were created in the original port to train the neural network; then, the controller was tested for automatic berthing in other ports, where the initial conditions of the inputs in the head-up coordinate system were similar to those of the teaching data in the original port. The results showed that the proposed controller has good performance for ship berthing in ports.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.236-238
• /
• 2015

According to the change of maritime environments and the development of science and technologies unidentified risk factors are created day by day in the world. It is crucial reason for the occurrence of maritime accidents that the unidentified risk factors make unexpected and extra-ordinary cases. Thus prior identification of unidentified risk factors is key issues to prevent maritime accidents. In addition to the identification of risk factors, the identification and classification of ongoing risk factors and evaluation model in the future is also one of key issues to consider unidentified maritime accidents. In this study, we searched on the conventional risks and unidentified risks to find risk control options for new, unidentified and expected risks.

• Journal of Navigation and Port Research
• /
• v.27 no.6
• /
• pp.599-604
• /
• 2003

In this paper, the ergonomic principle and concept will be established and the conceptual bridge design based on the ergonomic studies pertaining to bridge design undertaken by IMO and ISO will be introduced. In particular, this study has looked into the applicability of ergonomic design concept on coastal ships and proposes new bridge design to make good contribution to the prevention of marine accidents in the coastal sea.

• Journal of Navigation and Port Research
• /
• v.34 no.4
• /
• pp.265-270
• /
• 2010

The national VTS was launched in 1993, and has adopted a harbour-oriented control method which is unable to consider enough characteristics of its work. However, for the past 17 years, the characteristics has changed due to increased amount of vessels. Up to now the domestic Vessel Traffic Service has adopted harbour-oriented control method which is unable to consider enough characteristics of its work. However, developed countries have carried out waters-oriented control method, according to the using areas of ships, to be well considered the characteristics of control for increasing efficiency of it. Especially, VTS of Daesan, Pyeongtaek and Inchon harbour can have confusions of control because of overlapped service areas of it. Therefore, in this paper suggested a new Sector Division that the relevants waters is divided into 3 operational Regions and these are divided into nine sectors again, for the purpose of improving the efficiency and the concentration of VTS.