• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.1
• /
• pp.42-47
• /
• 2006

This study was conducted to investigate the efficacy of surface spraying of antimicrobial solutions, oil and application of both on performance of broiler chicken under heat stress and reared on leaves and ground corn cobs as two alternative bedding materials. Six hundred seventy five day-old straightrun Arian broiler chicks were randomly assigned to 45 pens (at density of $0.09m^2/bird$) in an open sided partially-controlled shed. Three bedding materials viz. wood shavings (WS), ground corn cobs (GCC) (1.5 cm in length) and leaves were subjected to surface spraying of oil ($0.4L/m^2$ animal food grade sunflower oil), anti microbial solutions (3%) and mix treatment of both. Data on performance traits, incidence of breast and food pad lesions and litter characteristics were gathered and analysed in an appropriate factorial arrangements. Body weight at 56 d, feed intake up to 14 d, litter moisture at 28 d, litter pH at 14 d and litter temperature at 14 and 56 d were significantly influenced by litter type (p<0.05). Litter treatment revealed significant impact on body weight at 28, 42 and 56 d, feed intake during 29-42 and 1-42 d, mortality up to 56 d, litter temperature at 28 and 56 d, and litter pH at 28 and 56 d. Leaves and ground corn cobs have shown good potential as alternative bedding materials for rearing broilers. Surface spraying of antimicrobial solutions, oil and applying both were not effective tools to promote the broiler's health and performance. Meat type poultry growers and integrators are considered as primary audiences of the results achieved.

• 한국연소학회:학술대회논문집
• /
• 2013.06a
• /
• pp.61-64
• /
• 2013

Biomass is well known for organic resources photosynthesized by carbon dioxide water in the air and thus it can be widely used in the form of energy and production for various kinds of materials. Through pyrolysis, biomass can be transformed into solid(biochar), liquid(bio-oil), and combustible gas on the different condition of temperature and heating rate. That's why biomass can be practically used to preprocess and produce a variety of elements. This work is to analyze the characteristics of slow pyrolysis of three different kinds of biomass extracted from Indonesia. They showed similar moisture content and combinations of combustible matters and had quite a large discrepancy in the ash among them like 2.1 & of Bagasse, 91% of PKS, and 20.9% of Paddy Straw, respectively. yield of biochar, solid form of the biomass, steadily decreased when the temperature went up and that of bio-oil the highest at the temperature of 500 degrees Celsius. At the same temperature range, PKS bio-oil showed 51.4 % of yield and Bagasse had 55.1% while it turned out that Paddy straw showed the lowest yield of 37.2%. The apparent density was also measured to figure out the density of each product from the pyrolysis experiments at the temperature of 500 degrees Celsius. The result was like these; the density of biochar was 0.17, the lowest, and that of Tree stem was 1.3 when mixed by an equal amount of biochar and bio-oil.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.167-178
• /
• 2016

Despite the size layer is an important part for conserving the artworks in the configuration of oil painting, the conservation scientific approaches of that have not been made yet. Therefore, this study produced standard samples on the basis of the analysis results of oil painting works, and carried out the evaluation of functions of the size layer materials. As a result of literature material, traditionally, animal glue was used for the size layer, whereas synthetic resin have been used in combination with animal glue since the modern age, in particular, it was identified that Polyvinyl Acetate(PVAc) was in general use. As a result of analysis of oil painting works, size layer was detected on the support and it was identified as animal glue. As a result of analysis based on Funaoka canvas for ground, it showed that the lead oxide and the titanium dioxide were the main constituents. On the basis of these results, standard samples were produced. As a result of evaluation on the functions of the size layer materials, in the case of the animal glue, stable result was observed in the shrinkag expansion rate, whereas slight weakness was observed in moisture proofing, color, and tensile strength, and dense cracks were found on surface. As for PVAc(A), moisture proofing, color, and the tensile strength exhibited stable results. Higher shrinkage rate was observed and the cracks with wide gaps were found on surface. As for PVAc(B), tensile strength, shrinkage expansion rate, and surface observation showed stable results, whereas moisture proofing property showed poor results. Different aspects were observed in each experiment, and this phenomena were considered to be due to the density and the adhesion properties between the hydrophilic and hydrophobic molecules in the size layer materials. The results are expected to be used as materials for the oil painting work conservation henceforth.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.115-116
• /
• 2016

This study applied BS replacement mortar's ERCO to see what impact it has on moisture evaporation and contraction changes, and resulted in the following. Depending on the rate of change in length according to the cure method of BS replacement mortar, high-strength areas were shown to have a bigger increase in the rate of change in length than regular or low-strength areas, and differences in rate of change in length due to ERCO cure methods were shown to be slight. For rate of changes in mass, on the whole there was an increase in the order of dry curing, cover curing, 7-day water curing, and28-day water curing. A comprehensive view says that after removal of test piece specimens, ERCO application did not expect a sufficient curing effect in the BS area.

• Journal of the Korean Society of Safety
• /
• v.38 no.4
• /
• pp.39-46
• /
• 2023

Pine trees, which account for 23% of the forested area of the Republic of Korea, are highly vulnerable to fire in comparison to broad-leaved trees due to the presence of consistent water tube sections throughout the year and resin that is composed of approximately 20% oil. In addition, the pattern of forest fires is determined by weather, topographic conditions, and fluctuation in moisture content. Therefore, when fire breaks out in pine tree forests during the dry season (January to March), it is difficult to extinguish, and it quickly spreads. In this study, the combustion characteristics of pine needles, pine cones, and pine branches in the water tube sections of living pine trees were compared and analyzed in accordance with the moisture content as per the ISO 5660-1. The monthly moisture content was analyzed from January to March, and it was found to be the lowest in March, with 53.6% for pine needles, 51.9% for pine branches, and 10.9% for pine cones. In particular, pine cones were more vulnerable to fire as compared to pine needles and pine branches because their moisture content was more than five times lower than that of pine needles and branches. The ignition time, which affects the speed of flame propagation, was the most rapid in March, and the fastest ignition time was for pine cones, at 19 seconds, followed by 34 seconds for pine needles, and 256 seconds for pine branches. The pine branches were the last to be ignited due to the effect of density, according to the thickness and specific gravity of the specimen. The peak heat release rate, which is a measurable index of fire intensity, was analyzed for pine cones and found to be 184.28 kW/m² , while the mean effective heat of combustion was 19.79 MJ/kg, and the total heat release rate was 39.7 MJ/m² , and these values were higher than those of pine branches and pine needles. Thus, we determined that the flame propagation speed and fire intensity according to the moisture content can be used to evaluate the risk of fire to the water tube section of pine trees. It is suggested that because of the combustion characteristics of the pine cone in March, that is when the forest is most vulnerable to fires.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.148-156
• /
• 2015

In this study the differences in the sample size and sample input changes as characteristics of bio-oil oak(Quercus variabilis), the oak 0.5~2.0 mm of the oak weighing 300~900g was processed into bio-oil via fast pyrolysis for 1.64 seconds. In this study, the physico-chemical properties of biooil using oak were investigated. Fast pyrolysis was adopted to increase the bio-oil yield from raw material. Although the differences in sample size and sample input changes in the yield of pyrolysis products were not significantly noticeable, increases in the yield of bio-oil accounted for approximately 60.3 to 62.1%, in the order of non-condensed gas, and biochar. When the primary bio-oil obtained by the condensation of the cooling tube and the seconary bio-oil obtained from the electric dust collector were measured separately, the yield of primary bio-oil was twice as higher than that of the secondary bio-oil. However, HHV (Higher Heating Value) of the secondary bio-oil was approximately twice as higher than that of the primary bio-oil by up to 5,602 kcal/kg. The water content of the primary bio-oil was more than 20% of the moisture content of the secondary bio-oil, which was 10% or less. In addition, the result of the elemental analysis regarding the secondary bio-oil, its primary carbon content was higher than that of the primary bio-oil, and since the oxygen content is low, the water content as well as elemental composition are believed to have an effect on the calorific value. The higher the storage temperature or the longer the storage period, the degree of the viscosity of the secondary bio-oil was higher than that of the primary bio-oil. This can be the attributed to the chemical bond between the polymeric bio-oil that forms during the storage period.

• New & Renewable Energy
• /
• v.18 no.3
• /
• pp.23-31
• /
• 2022

This study evaluated the potential of coffee waste (CW) and used frying oil (UFO) as an additive in the production of pitch pine (PIP) and Mongolian oak (MOK) pellets. Ash contents obtained from CW and UFO were 0.5% and <0.1%, respectively. The calorific values of UFO (31.4 MJ/kg) and CW (26.3 MJ/kg) are higher than PIP (20.6 MJ/kg) and MOK (19.1 MJ/kg). For pellets fabricated using a pilot-scale flat-die pellet mill, regardless of fabricating conditions, moisture content (MC) and bulk density of PIP and MOK pellets satisfied the A1 wood pellet standard for residential and small-scale commercial uses, as designated by the National Institute of Forest Science (NIFOS) of the Republic of Korea. When CW was used as an additive, durability of PIP pellets made with 12%-MC sawdust and MOK pellets increased. The optimal conditions for producing PIP and MOK pellets could be by adding 20 mesh CW as an additive and the using of 12%-MC sawdust. However, durability of PIP pellets and ash content MOK pellets did not satisfy the A1 wood pellet standard of NIFOS. Thus, further research is needed to improve the properties of wood pellets with additives.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1421-1432
• /
• 2018

Water soluble oil was obtained from the pyrolysis of coconut waste as a biomass at $600^{\circ}C$. It was studied that the combustion characteristics of bio-emulsion fuel by mixing and emulsifying 15~20% of water soluble oil which obtained from pyrolysis of coconut waste as a biomass and MDO(marine diesel oil) as a marine fuel. Engine dynamometer was used for detecting emissions, temperature, and power. The temperature of combustion chamber was decreased because the moisture in bio-emulsion fuel deprived of heat of evaporation in combustion chamber. While combustion, micro-explosion took place in the combustion chamber by water in the bio-emulsion fuel, MDO fuel scattered to micro particles and it caused to smoke reduction. The temperature reduction of combustion chamber by using bio-emulsion fuel reduced the NOx emission. The increasing of bio-oil content caused increasing water content in bio-emulsion fuel so total calorific value was reduced. So the characteristics of power was decreased in proportion to using the increasing amount of bio-emulsion fuel. Heavy oil as a marine fuel exhausts a lot of smoke and NOx. We expect that we can reduce the exhaust gas of marine engine such as smoke and NOx by using of bio-emulsion fuel as a marine fuel.

• Korean Journal of Food Science and Technology
• /
• v.5 no.2
• /
• pp.113-118
• /
• 1973

In this study, the several chemical compositions, which include general components (moisture, fat, protein, sugar, fiber, ash, acid insoluble ash), minor components (sesamol, sesamolin, sesamin), the characteristics of oil (specific gravity, refractive index, iodine value, saponification value, unsaponificable matter, insoluble impurities), fatty acid components (analyzed by GLC), amino acid patterns (analyzed by autoanalyzer), of Korean whole white Sesamum indicum were investigated and were compared with decuticled sesame samples. The results were summarized as follows: 1) The crude fiber, total ash and acid insoluble ash contents of the decuticled sesame seed and it meal were significantly lower as compared to the whole sesame samples. 2) The specific gravity, refractive index, iodine value, unsaponificable matter and insoluble impurities contents of the whole sesame oil were greater than the decuticled samples. 3) The fatty acid contents of the whole and decuticled sesame oil were approximatly equal amounts. But unsaturated fatty acid contents of the decuticled sesame oil was significantly lower than the whole sesame oil. 4) The decuticled sasame meal was concentrated higher protein than the whole sasame meal. But amino acid contents of the protein in their was approximatly equal amounts and sesame proteins are found to be rich in methionine, cystine and tryptophan, they are deficient in lysine. 5) The sesamol, sesamolin and sesamin contents of the whole and decuticled sesame oil were approximatly equal amounts. 6) The oxalate and calcium contents of the decuticled sesame seed and its meal were also significantly lower as compared to the whole sesame samples.

• Journal of Environmental Science International
• /
• v.19 no.4
• /
• pp.407-414
• /
• 2010

Physiological activity and antioxidative activity of Maesangi(Capsosiphon fulvescens) extracts with distilled water or 95% ethanol were investigated. For the evaluation of physiological and antioxidative activities, some evaluation assay methods such as measurement of Hunter color value, chlorophyll a/b value, total phenolics, reducing power and thiobarbituric acid(TBA) value of soybean oil were used. Proximate composition and mineral contents of Masaengi were orders of crude protein>crude fiber>moisture>crude ash>crude lipid, and K>Ca>Mg>Na>P>Fe>Zn, respectively. In ethanol extract, the content of total phenolic compounds in Maesangi was determined to half times of that in Dasima(Laminaria). The reducing power of Maesangi-ehtanol extract was about 5 % of vitamin C and was lower than that of Dasima-ethanol extract. The TBA value of Maesangi-ethanol extract on soybean oil oxidation was about 47 % and 68.4 % to control in three and eight days oxidation, respectively. But TBA value difference was not observed significantly with the dosage below 5mL of ethanol extract.