• 복식문화연구
• /
• 제12권6호
• /
• pp.1010-1020
• /
• 2004

The purposes of this study were to investigate characteristic changes on nonwoven fabric by the charcoal and the yellow soil printing. It separate the grind charcoal and the yellow soil as two different size of particles $45{\sim}52{\mu}m\;and\;53{\sim}65{\mu}m$ for hand screen printing on three kind of nonwoven fabrics. To examine the effect of the charcoal and the yellow soil printing on nonwoven fabric were to observe surface changes by a scanning electron microscope, dyeability by using spectrophotometer, moisture regain by oven method, deodorization and antibacterial activity. The results were as follows: When the charcoal and the yellow soil powder concentration increased from 3 to $9\%$ or from 5 to $10\%$, K/S value also increased from 3.06 to 8.55 or from 1.14 to 1.80. The charcoal and the yellow soil moisture regain also increased. In same concentration, moisture regain occurred higher as particle of small size. In concentration of charcoal $3\%$, rate of deodorization measured as $89\%,\;83\%\;and\;87\%,\;and\;9\%$ concentration caused $96\%,\;86\%\;and\;93\%$ of high deodorization. In concentration of 5, $10\%$ of yellow soil, rate of deodorization measured as $85\%$ over. Antibacterial activity examination in nonfinished nonwoven fabric resulted range of $60\%$, however, $3\%\;and\;9\%$ concentration finished nonwoven fabric resulted $99.9\%$ of excellent antibacterial activity. Also $5\%,\;10\%$ yellow soil concentration was appeared same resoult.

• 한국염색가공학회지
• /
• 제21권1호
• /
• pp.38-45
• /
• 2009

First of all, the properties imparted to PET fabrics are resistance to and recovery from creasing or wrinkling when wet or dry; high resistance to stretch in the filament yarns but not in the staple; high abrasion resistance; good texture and appearance; resistance to heat ageing; good chemical resistance and good resistance, behind glass, to sunlight. But, the low moisture regain of PET fabric conduces to static troubles in textile processing. Furthermore, garments made from PET may, during wear, develop electric charges which attract to the fabric particles of soil(dirt, swarf, dust) flying in the air, so that the cuffs of shirts, for example, become soiled quickly and are not easily laundered clean. The sericin constitutes 25$\sim$30％ of silk protein and surrounds the fibroin fiber with sticky layer that supports the formation of a cocoon. The useful biochemical properties of sericin protein are oxidation resistant, antibacterial, UV resistant, hydrophilic property, and good affinity with hydrophobic material. These properties can be used as an improving reagent or a coating agent for natural and synthetic fibers, fabrics, and other intermediate products. The sericin is also applied to cross-link, and can be blended with other materials. In this study, we modified the surface of PET fabric by mixture of sericin finishing agent; sericin, polyuretane binder and 1,2,3,4-butanetetracarboxylic acid (BTCA) cross-link agent. Also, we investigated the finshing effect; moisture regain, stiffness, handle, drape and electrostatic. The moisture regain of PET fabric treated with sericin finishing agent was higher than that of untreated PET fabric. As a result of evaluating influence about handle of PET fabrics treated with sericin finishing agent, it was confirmed that the sericin finishing agent could be use as a linen like finishing agent.

• 한국의류학회지
• /
• 제32권6호
• /
• pp.911-917
• /
• 2008

본 연구는 폴리에스터 직물에 리파제 처리시 첨가제에 따른 수분특성 변화를 검토하였다. 활성제(염화칼슘) 및 비이온 계면활성제(Triton X-100) 첨가가 수분율, 접촉각, 흡수속도, 표면형태변화에 미치는 영향을 비교, 분석하였다. 연구결과, 리파제 처리된 폴리에스터 직물의 수분율은 비이온 계면활성제인 Triton X-100 첨가시 현저히 감소하는 것으로 나타났다. 그러나 리파제의 활성제로 알려진 염화칼슘 첨가 시 폴리에스터 직물의 수분특성은 다소 증가하는 것으로 나타났다. 특히 리파제 처리 시 염화칼슘이 10mM이상 첨가된 경우 폴리에스터 직물의 수분특성이 증가되었다. 리파제 처리된 폴리에스터 직물의 표면관찰 결과, 섬유표면에 생성된 보이드와 크랙이 폴리에스터 직물의 수분특성 증가에 영향을 미치는 것으로 확인되었다. 이상의 결과를 통해, 폴리에스터 직물에 리파제 처리시 Triton X-100은 리파제의 활성을 저해하고, 염화칼슘은 리파제의 활성을 다소 증가시키는 것을 확인하였다.

• 한국의류학회지
• /
• 제29권3_4호
• /
• pp.470-477
• /
• 2005

This study was carried out to evaluate the biodegradability of viscose rayon and lyocell fibers, employing soil burial test, activated sludge test and enzymatic hydrolysis. Using X-ray analysis, crystallinity and morphology change was investigated. External changes after degradation were also observed by SEM and digital photographs. Vscose rayon fibers exhibited higher biodegadation than lyocell fibers, indicating that lower crystallinity favored the biodegradation. Among the biodegradability of lyocell fibers there was a tendency that fibers with lower crystallinity and higher moisture regain had higher values. When external changes after degradation being observed, it was shown that there were microorganisms growing on the surfaces of samples accompanying lading and weakening. From these results it was concluded that biodegradability of the specimens was most closely correlated to the moisture regain and crystallinity of fibers which reflects hydrophilicity and internal structure.

• 한국의류학회지
• /
• 제29권7호
• /
• pp.1027-1036
• /
• 2005

Based on the correlation analysis result of preceding research, the biodegradabilities of cellulose fibers were closely related to the moisture regain of the samples, which reflects the hydrophilicity and internal structure of the fibers. In addition to this factor, it was expected that the biodegradation conditions influence the biodegradability of fibers. In this study, widely used cellulose fibers including cotton, rayon, and acetate were used. The biodegradabilities of cellulose fibers were measured by soilburial test, and then the degradation behaviors based on each condition were compared. Moreover, the effects of degradation conditions such as humidity of the soil were investigated. Changes in the internal structure of samples were also observed by X-ray analysis according to the soil burial time. It was shown that humidity of soil facilitated the degradation of cotton, rayon, and acetate fibers, showing higher degradation rate with higher humidity in soil. This effect was shown to be much greater in the fibers of high moisture regain such as cotton and rayon. In respect of microstructure change, crystallinities and their crystal size of fibers decreased remarkably in the soil of higher humidity. It was revealed that degradation of crystalline area was more dependent on the soil humidity than that of amorphous area.

• 한국생활과학회지
• /
• 제7권1호
• /
• pp.175-182
• /
• 1998

This study was to investigated physical properties of lining fabric (Nylon, Acetate, Rayon and Polyester) such as shrinkage, tensile strength, moisture regain and crease resistance. The results were as follows. 1. The number of repeated washing times and the concentration of the detergent almost didn't affect on the change of tensile strength. 2. As washing increase more, the shrinkage of all sample was more increased. In the case of Rayon, it was showed that shrinkage was high by $1{\sim}3$ times washing. In the case of Nylon, it was showed minus shrinkage according to frequency of washing. 3. The moisture regain was very decreased by 1 times washing. But the moisture regain was increased with increase in frequency of washing and resulted in it was showed a similar value with controls. 4. As the frequency of washing and the concentration of detergent increase more, the crease resistance was decreased considerably because the elasticity of fiber decreased by mechanical force such as tension, bending and pressure and alkali.

• 한국의류산업학회지
• /
• 제7권1호
• /
• pp.91-95
• /
• 2005

The purpose of this study is to investigate the improvement of fiber surface, physical properties and research the physical properties and dyeability of cotton fabrics treated with KOH solution at low and high temperature. The treatment conditions for mercerization with KOH were changed various temperatures(25, $90^{\circ}C$), concentrations(15, 20, 25, 30%. w/v) and times(30, 60, 180, 300sec). The effects of mercerization after KOH treatment estimated with tensile strength, tearing strength, shrinkage, drape stiffness, moisture regain, fiber surface, and dyeability. The optimal conditions were concentration of KOH 20%, time 180sec in low temperature and concentration of KOH 20%, time 60sec in high temperature. The results are as follows; Tensile strength, tearing strength and moisture regain were much improved than those of untreated cotton fabric. Shrinkage and drape stiffness of KOH treated cotton were more increased at $25^{\circ}C$ than $90^{\circ}C$. Fiber surface showed more rounded shape at $25^{\circ}C$ than $90^{\circ}C$. Dyeability of cotton fabrics improved by KOH treatment.

• 한국의류학회지
• /
• 제35권8호
• /
• pp.1006-1013
• /
• 2011

An enzymatic treatment method using alcalase was introduced to improve the moisture characteristic of the polyamide fiber. The alcalase treatment conditions such as the pH, treatment temperature, enzyme concentration, and treatment time were optimized by measuring the amino groups. The changes in the weight loss, tensile strength, moisture regain, water contact angle (WCA), and water absorption rate of the polyamide fiber with the changes in the alcalase treatment conditions were evaluated. The optimum alcalase treatment conditions for polyamide fiber were found to be a treatment temperature of 50oC, a treatment time of 50 minutes, an alcalase concentration of 10% (owf), and a pH of 7.0. The ethylenediaminetetraacetic acid (EDTA) and L-cysteine accelerated the activity of the enzyme; however, they did not have an effect on the amino group production of the fiber surface. The alcalase treatment of the polyamide fiber improved the fiber's moisture regain, WCA, and absorption rate due to the amino group on the fiber surface. The results showed that the alcalase treatment of polyamide fiber is an effective method to improve the moisture characteristic of the polyamide fiber.

• 한국의류학회지
• /
• 제24권5호
• /
• pp.686-695
• /
• 2000

Recently, with a growing interest of health and environment, chitosan which was good in no harmful effect to human body and environment, has been watched as the finish treatment of hygiene and pleasantness. The purpose of this study is to develop multifunctional fabric that was improved antimicrobial activity and deodorization rate, water absorption, static voltage and dye absorption by treatment of nylon 6 grafted with acrylic acid added in chitosan. FT-IR spectra of the grafted with acrylic acid added in chitosan shows peaks of COOH and NH2. Antimicrobial activity and deodorization rate of chitosan and grafted with acrylic acid added in chitosan were increased greatly than the control, durability of laundry of grafted with acrylic acid added in chitosan was good. In case of chitosan was dyed acid dyes and grafted with acrylic acid added in chitosan was dyed basic dyes, dye absorption of them were increased than the control. Moisture regain, absorption time and tensile strength of grafted with acrylic acid added in chitosan was increased greatly than the control.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2008년도 제38차 학술발표대회
• /
• pp.135-137
• /
• 2008

PVA films with 1,2,3,4-Butanetetracarboxylic acid(BTCA) and sodium hypophosphite monohydrate(SHM) were crosslinked via thermal curing. Different parameters affecting on the crosslinking were investigated including BTCA and SHM concentration, curing temperature and time. The cured films was extracted with boiling water and gel fraction was calculated from weight change of the PVA films. Moisture regain of the gelled films was also measured. While the gel fraction of PVA films increased with increasing curing temperature and time, moisture regain decreased. Water resistance of the crosslinked PVA films improved by the BTCA crosslinking treatment.