• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.5
• /
• pp.709-715
• /
• 2015

As consumers interest in microgreens is increasing worldwide, the production of leafy microgreens uisng different LED lights was investigated in this study. The experiment was carried out to evaluate the effects of different LED lights on the composition and vitamin C contents of buckwheat microgreens. Physicochemical properties of buckwheat microgreens grown under different lights (red, blue, and white) and control exposed to a dark room were investigated. Moisture contents of buckwheat microgreens were 95.65% under white light (WL), 95.75% under blue light (BL), 90.77% under red light (RL), and 89.71% under dark room (DR). Crude ash contents of buckwheat microgreens grown under WL, DR, RL, and BL were 0.39%, 0.39%, 0.31%, and 0.37%, respectively. Crude protein contents of buckwheat microgreens grown under DR, RL, WL, and BL were 7.12%, 7.81%, 1.60%, and 2.40%, respectively. Crude fat contents of buckwheat microgreens grown under DR, BL, RL, and WL were 1.12%, 0.54%, 0.35%, and 0.22%, respectively. $^{\circ}Brix$ was the highest in microgreens grown under BL and RL and the lowest in buds grown under DR. Vitamin C content was the highest in buds grown under WL and the lowest in buds grown under BL. Total chlorophyll content was the highest in microgreens grown under RL and the lowest in buds grown under WL. For mineral content measurement of buckwheat microgreens, Ca, K, Mg, and P contents were high whereas B, Cu, and Zn contents were not detected. The mineral contents of buckwheat microgreens according to each color of light showed significant differences. These results demonstrated that treatment of different colored LED lights during cultivation was able to increase vitamin C content up to affecting the nutritional value of buckwheat microgreens.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.10
• /
• pp.1484-1491
• /
• 2015

The new cultivar Lentinula edodes, which is named 'Lentinula edodes GNA01', was bred by mating strains isolated from 'L26' and 'Kyoungwon9015' obtained from Sammyungjin Research Institute, Fujian, China. L. edodes GNA01 does not have stipes like L. edodes, although it generally has a similar spherical shape. Moisture and crude protein contents of L. edodes GNA01 were lower than those of L. edodes. Meanwhile, L. edodes GNA01 contained higher levels of crude ash, crude lipid, crude fiber, and carbohydrates than L. edodes. The ${\beta}$-carotene content ($19.05{\mu}g/100g$) of L. edodes GNA01 was about three times higher than that of L. edodes. In addition, vitamin D content ($118.53{\mu}g/100g$) of L. edodes GNA01 was more than twice that of L. edodes. L. edodes GNA01 was a good source of mineral elements, with K and Mg contents of 2,277.50 mg/100 g and 203.15 mg/100 g, respectively. The major fatty acids of L. edodes GNA01 were C16:0 and C18:2, and L. edodes GNA01 had the highest linoleic acid (C18:2) content of 1,087.66 mg/100 g. Total phenol content of L. edodes GNA01 was 12.52 mg GAE/g, and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activities and ferric reducing antioxidant power (FRAP) values of L. edodes GNA01 were lower than those of L. edodes at all concentrations. However, DPPH radical scavenging activities and FRAP values of L. edodes GNA01 were above 80% and 0.9 at a concentration of 10 mg/mL, respectively.

• Journal of Conservation Science
• /
• v.24
• /
• pp.23-36
• /
• 2008

The stone Buddhas and Shrine of Unjusa temple (Korea Treasure No. 797) in Hwasun formed in Koryo Dynasty are unique style which the Buddha faces each other the back parts of south and north within the stone Shrine. The stone Buddhas and Shrine are highly evaluated in historical, artistic and academic respects. But, the stone properties have been exposed in the open system various aspects of degradations weathered for a long time without specific protective facilities. The rock materials of the stone Buddhas and Shrine are about 47 blocks, and total press load is about 56.6 metric ton. The host rocks composed mainly of white grey hyaline lithic tuff and rhyolitic tuff breccia. In addition, biotite granite used as part during the restoration works. The chemical index of alteration for host tuffaceous rocks and the replacement granites range from 52.1 to 59.4 and 50.0 to 51.0, respectively. Weathering types for the stone Buddhas and Shrine were largely divided with physical, chemical and biological weathering to make a synthetic deterioration map according to aspects of damage, and estimate share as compared with surface area. Whole deterioration degrees are represented that physical weathering appeared exfoliation. Chemical weathering is black coloration and biological weathering of grey lichen, which show each lighly deterioration degrees. According to deterioration degree by direction of stone Buddhas and Shrine, physical weathering mostly appeared by 39.1% on the sorthern part, and chemical weathering is 61.2% high share on the western part. Biological weathering showed 38.3% the largest distribution on the southern part. Therefore, it is necessary to try hardening for the parts with serious cracks or exfoliations, remove secondary contaminants and organisms through regular cleaning. Also necessary to make a plan to remove moisture of the ground which causes weathering, and estimate that need established and scientific processing through clinical demonstration of conservation plan that chooses suitable treatment.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.6
• /
• pp.693-698
• /
• 1999

To investigate changes of components in salt-fermented northern sand lance, Ammodytes personatus sauce during fermentation, various chemical properties were examined at 1$\~$3 months intervals during 18 months fermentation. The moisture content decreased slightly, but the content of VBN and crude protein, total nitrogen, amino nitrogen, degree of hydrolysis, and absorbance at 453 nm increased gradually during fermentation. On the other hand, ash content, pH, and salinity showed almost no change. The contents of total nitrogen, amino nitrogen, and degree of hydrolysis increased sharply until 6$\~$8 months fermentation and showed the gentle increment after that, The Hx and uric acid were the most abundant in ATP related compounds, ranging from $83.1\%$ to $92.9\%$, After 18 month of fermentation, sauce was rich in free amino acids, such as glutamic acid, alanine, Iysine, leucine, isoleucine, valine, aspartic acid in that order.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.4
• /
• pp.277-282
• /
• 2016

The consumption of waxy corn is steadily increasing in Korea. Waxy corn is harvested before it reaches full maturity and consumed immediately or follwing cold storage. Glutinous and sweet kernels are preferred due to their high palatability. The kernel properties can change rapidly following harvest, and, therefore, optimal conditions to maintain the kernel quality of corn should be identified. In addition, the timing of harvest of waxy corn ear should be also determined for optimal marketable corn production. From 10 days after silking (DAS) to25 DAS. fresh ear weight and single kernel weight rapidly increased from 78.3 g and 1.13 g, respectively, to 224.9 and 3.61 g, respectively. However, by 30 DAS both fresh and single kernel weight decreased by 10.6% and 6.1%, respectively. Kernel hardness significantly increased up to 25 DAS, and a further slight increase in kernel hardness was observed at 30 DAS. Total sugar content in kernel decreased from 12.5% at 10 DAS to 3.5% at 35 DAS, which was the result of the conversion of sugars to starch during ear development. Crude protein content in kernel did not vary significantly in comparison to kernel hardness. During storage of ear, kernel hardness increased from $726g\;cm^{-2}$ at harvest to $1894g\;cm^{-2}$ following 28 days of storage at a low temperature ($0^{\circ}C$). Kernel hardness increased 2.5 fold from 15 DAS to 30 DAS. Soluble protein level in kernel increased until 10 DAS, following which a slight decrease was observed. The soluble protein content decreased from 1.85% at 5 DAS to 1.45% at 35 DAS. Total sugar content in kernel decreased regardless of storage temperature; however, the rate of reduction was lower at $0^{\circ}C$ than that observed following storage at $4^{\circ}C$ and $10^{\circ}C$. The rate of reduction in kernel moisture content was also lower at $0^{\circ}C$ than that observed at $4^{\circ}C$ and $10^{\circ}C$.

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.655-666
• /
• 2005

This study was performed to measure physicochemical and textural characteristics, and shelf-life effect of low-fat functional sausages(LFFSs) manufactured with sodium lactate(SL, 3.3%), lac pigment and various molecular weights(MWs) of chitosan (Low=1.5 kDa, Med=30-50 kDa and High=200 kDa) during storage at 15$^{\circ}C$ for 18 days. LFFSs had 73.7-76.0% moisture, lower than 3% fat and 14-15% protein, respectively. pH values were 6.05-6.44 and the control(150 ppm, $NaNO_2$) was the lowest among LFFSs (p<0.05). Increasing storage time decreased pH values, but no differences in pH values were observed up to 6 days of storage (p>0.05). LFFSs containing SL and low MW of chitosan improved water holding capacity (WHC) and different from those with SL and medium-MW chitosan. WHC was decreased with increased storage time and differences of WHC were observed from 18 days of storage. The addition of chitosan reduced both lightness and redness values, as compared to 150 ppm sodium nitrite(SN), and increased storage time decreased yellowness(p<0.05), especially at 12 days of storage. LFFSs with SL and medium-MW chitosan increased most textural properties compared to the control(p<0.05). The addition of SN of 150 ppm in LFFSs retarded microbial growth for E. coli 0157:H7, while those with SL tended to have an antimicrobial effect for Listeria monocytogenes(LM). The growth rate of LM was delayed by addition of various MW of chitosans in LFFSs, especially high MW chitosan, as compared to LFFSs containing SL alone. These results indicated that the functional, textural and antimicrobial effects of LFFSs were improved by addition SL and various MW of chitosan combinations. In addition, 0.05% lac pigment improved the cure color of LFFSs similar to those of 150 ppm SN.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.55-62
• /
• 2006

Transverse cracks in continuously reinforced concrete pavement (CRCP) occur at early ages due to temperature and moisture variations. The width and spacing of transverse cracks have a significant effect on pavement performance such as load transfer efficiency and punchout development. Also, crack widths in CRCP depend on 'zero-stress temperature,' which is defined as a temperature where initial concrete stresses become zero, as well as drying shrinkage of concrete. For good long-term performance of CRCP, transverse cracks need to be kept tight. To keep the crack widths tight throughout the pavement life, zero-stress temperature must be as low as practically possible. Thus, temperature control at early ages is a key component In ensuring good CRCP performance. In this study, concrete temperatures were predicted using PavePro, a concrete temperature prediction program, for a CRCP construction project, and those values were compared with actual measured temperatures obtained from field testing. The cracks were also surveyed for 12 days after concrete placement. Findings from this study can be summarized as follows. First, the actual maximum temperatures are greater than the predicted maximum temperature in the ranges of 0.2 to 4.5$^{\circ}C$. For accurate temperature predictions, hydration properties of cementitious materials such as activation energy and adiabatic constants, should be evaluated and accurate values be obtained for use as input values. Second, within 24 hours of concrete placement, temperatures of concrete placed in the morning are higher than those placed in the afternoon, and the maximum concrete temperature occurred in the concrete placed at noon. Finally, from the 12 days of condition survey, it was noted that the rate of crack occurrence in the morning placed section was 25 percent greater than that in the afternoon placed section. Based on these findings, it is concluded that maximum concrete temperature has a significant effect on crack development, and boner concrete temperature control is needed to ensure adequate CRCP performance.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.3
• /
• pp.36-44
• /
• 2007

The purpose of this study was to investigate thermal stability, reactivity, and bonding strength of existing epoxy resin mixed with the epoxidized soybean oil (ESBO) in order to use soybean oil economically. In the dry shear test, the marked strengths showed $30.5kgf/cm^2$ at the ratio of ESBO to epoxy resin 9 : 1 and $6.2kgf/cm^2$ at the ratio 8 : 2. The bonding strengths of the others, except mixing ratios 2 : 8 and 1 : 9, exceeded the requirement of Korean plywood standard of $7.0kgf/cm^2$. In the wet shear test, the result was $5.8kgf/cm^2$ at the ratio 9 : 1. There were no thickness swelling and moisture absorption in the water resistance of the film. The value of activation energy, Tg (${\Delta}E$), by DSC analysis showed between $110^{\circ}C$ and $120^{\circ}C$ through all ratios. Epoxy in the epoxy resin fully reacted with the hardener (TETA), but it is difficult to decide that epoxys in the ESBO were reacted directly with the hardener from FT-IR analysis. As the mixing ratio of ESBO increased, the thermal stabilities dropped from TGA analysis. From the comprehensive view on the results of above experiments, it could be confirmed through experiments that the ESBO in the mixed adhesive of epoxy resin/ESBO played a role as an extending agent level of epoxy adhesive, and we were able to know that in order to utilize ESBO as an adhesive, a study should be performed on the condition of hardening, inducible of the hardening reaction.

• Food Science of Animal Resources
• /
• v.29 no.2
• /
• pp.178-187
• /
• 2009

This study was carried out to investigate the effects of grape seed oil on quality characteristics of pressed ham. Five different treatments were tested based on differences in the amount of grape seed oil added to the pressed ham. As a control, 10% back fat was added without any grape seed oil. For the first treatment, 10% grape seed oil replaced a portion of the lard component added to the pressed ham. For the 2nd, 3rd and 4th treatments, 20%, 30% and 40% of grape seed oil were substituted for lard, respectively. Pressed ham manufactured with grape seed oil was vacuum packaged and stored for 1, 7, 14,21 and 28 d at $4^{\circ}C$. Samples were analyzed for chemical composition, physico-chemical properties (pH, color) and texture characteristics. Typical chemical composition characteristics (crude protein, crude fat, crude ash) were not significantly different between control and grape seed oil treatment groups. Moisture content of grape seed oil treatment groups (GSO 30% and 40%) was significantly lower than that of controls (p<0.05). There was a not clear difference in pH between control and grape seed oil treatment groups. In the 21 d of storage, pH values of all treatments were significantly higher than those of other storage days. Meat color $(CIEL^*\;and\;b^*)$ of grape seed oil treatment group (GSO 40%) was significantly higher than that of control. Whereas meat color a value of GSO 40% treatment was significantly lower than that of control. It was not clearly changed as storage time increased. There was no significant difference in texture between control and grape seed oil treatment groups, and appeared to be unaffected by storage length. Based on these findings, we conclude that the chemical composition and texture characteristics of manufactured pressed ham were not affected by grape seed oil addition. These results also indicate that high-quality pressed ham can be manufactured with increased polyunsaturated fatty acid content.

• The Korean Journal of Mycology
• /
• v.40 no.4
• /
• pp.244-253
• /
• 2012

The effect of fermented Rhus verniciflua stem bark (FRVSB) extract on the microbial count, enzyme activity, concentrations of free amino acids and organic acids, and physiochemical properties of doenjang (soybean paste) was evaluated during brine fermentation. The FRVSB extract increased the total free amino acid concentration by 1.3-3.1-fold on the $42^{nd}$ day of brine fermentation. After the filtration of brine, the following microbial counts were obtained in the doenjang: bacteria, $0.3{\times}10^8-12.0{\times}10^8$ cfu/g; mold, $3.0{\times}10^4-21.0{\times}10^4$ cfu/g; yeast, $1.0{\times}10^4-2.0{\times}10^4$ cfu/g; Escherichia coli, not detected; and Bacillus cereus, $3.0{\times}10^2-25.0{\times}10^2$ cfu/g. The FRVSB extract addition enhanced the protein and starch degrading activity by 13.8-26.0% and 16.1-35.1%, respectively. The extract increased the total free amino acid content by 1.4-3.0-fold. Lactic acid, acetic acid, and pyroglutamic acid were the predominant organic acids in doenjang. Moreover, the proximate composition, pH, moisture, ash, salt, and amino nitrogen content were increased.