• Title/Summary/Keyword: Moisture expansion

Search Result 212, Processing Time 0.024 seconds

A Case Study on the Debonding Defect of Wood Floor Board in Apartment House (공동주택 바닥 목재 마루판 들뜸 하자 사례조사 연구)

  • Choi, Sung-Yong;Han, Min-Cheol;Han, Cheon-Gco
    • Proceedings of the Korean Institute Of Construction Engineering and Management
    • /
    • 2008.11a
    • /
    • pp.914-917
    • /
    • 2008
  • This paper was to discuss the case and cause of debonding defect of wood floor board in apartment house by investigating actual survey. Most frequent defect in wood floor board was debonding of floor board. Scratch, gap and crack of floor board were also found in floor board installment work. Causes of debonding of floor board is shrinkage of cement mortar beneath floor board and expansion of floor board. Haste in floor board work did not provide enough time to dry cement mortar fully, which led to continue to dry after the installment of floor board. It caused moisture movement toward wood floor board. Accordingly, Before floor board work, careful consideration on moisture condition of cement mortar and enough curing time to eliminate the effect of moisture are taken into.

  • PDF

Comparative Studies on Physical and Mechanical Properties of Domestic Wood-Based Panels (국산목질판상재료(國産木質板狀材料)의 물리적(物理的) 및 기술적성질(機械的性質)에 관(關)한 비교연구(比較硏究))

  • Lee, Phil-Woo
    • Journal of the Korean Wood Science and Technology
    • /
    • v.18 no.2
    • /
    • pp.67-78
    • /
    • 1990
  • This study was performed to determine the characteristics of physical and mechanical properties of domestic wood based materials; plywood, particleboard, medium density fiberboard. Main items of tested properties were panel size, moisture content, water absorption, linear expansion and thickness swelling, glue bond shear strength, bending properties(stress at proportional limit, modulus of rupture. modulus of elasticity), tensile strength, screw holding strength, and internal bond as neccessary. the results were discussed mainly with Korean Standards. The obtained conclusions are as follows; 1. Length and width of 3mm thin plywood(3-ply) and 12mm thick plywood(7-ply) were satished with KS-standard, but thicknesses of these panels were not- passed tolerance limit except one of eight makers. 2. Length and width of particleboard and medium density fiberboard were greater than the tolerance limit value of KS standard, but the thicknesses of these panels were passed this value. 3. Moisture contents of 12mm thick and 3mm thin plywood were satisfied with KS-standard except one mill made 3mm thin plywood. 4. Moisture absortion of plywood was not passed tolerance limit of KS-standard but particleboard was satisfied with this standard value. 5. Dry and wet shear strengths in glue bond of 3mm thin plywood were not reached to KS-standard, but those of 12mm thick plywood were sufficiently satisfied with KS standrad. 6. Modulus of ruptures, parallel to grain and perpendicular to grain of plywood, and particleboard and medium density fiberboard were satisfied with KS-standard. 7. Tensile strengths, parallel to grain and perpendicular to grain of plywood were satisfied with allowance stress of US product standard PS 1-74. 8. Screw holding strength of particleboard was not reached to KS standard, but internal bond was satisfied with KS standard.

  • PDF

Evaluation of Physical and Mechanical Characteristics of Korean Epoxy Asphalt Mixtures (국산 에폭시 아스팔트 혼합물의 물리.역학적 특성 평가)

  • Kim, Byung-Hun;Baek, Jong-Eun;Lee, Hyun-Jong;Park, Hee-Mun
    • International Journal of Highway Engineering
    • /
    • v.14 no.1
    • /
    • pp.17-24
    • /
    • 2012
  • This study evaluated the performance of Korean epoxy asphalt mixtures using several laboratory tests. Four types of epoxy asphalt mixtures were manufactured based on 13mm dense graded asphalt mixtures: three Korean and one Japanese epoxy asphalt mixtures where 20% or 40% of asphalt binder was replaced by epoxy resins. Curing time was determined as 3 and 6 hours for the mixtures containing 40% and 20% of epoxy resins, respectively. From the laboratory tests including wheel tracking, indirect tension fatigue, bending beam, and moisture susceptibility tests, it was concluded that the epoxy asphalt mixtures had superior performance than conventional asphalt mixtures except moisture susceptibility. Also, the performance of the Korean epoxy asphalt mixtures was comparable to the Japanese mixtures. Thermal coefficient, bond strength, and indirect tension tests were conducted to examine the applicability of the Korean epoxy asphalt mixtures to concrete repair. Its adhesion was strong enough to be bonded to surrounding concrete materials and its tensile strength was comparable to the concrete, but thermal expansion coefficient was 5 times greater than the surrounding concrete.

The Physical Characteristics of Chinese Hand-made and Machine-made Noodles (시중 중화면의 수타면과 기계면의 물리적 특성)

  • Kim, Sung-Su;Yoon, Jang-Ho;Lee, Seung-Ju
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.18 no.1
    • /
    • pp.80-86
    • /
    • 2008
  • Both hand-made and machine-made Chinese noodles are popular in Korea. In this study, each type was evaluated in terms of its physical properties to rigorously determine for consumers which one has better qualities. The noodles were instrumentally measured for color, size, moisture content, density, viscoelasticity, and cutting force. The behaviors of the noodles were visually observed during cooking, and sensory evaluations were performed with the cooked noodles. The hand-made raw noodles were less dense, had higher moisture content, and generated more bubbles during cooking than the machine-made noodles. This indicated that the hand-made noodles contained more entrapped air, thereby resulting in the above physical characteristics. The change in noodle size after cooking was greater in the hand-made noodles, indicating that more entrapped air in expansion escaped during cooking and was replaced by water. The cutting force and viscoelasticity of the hand-made noodles were lower, and were controlled by viscous properties, respectively. These results agreed with the fact that the hand-made noodles had higher moisture content and lower density. In the sensory evaluation, the hand-made noodles presented lower hardness, but higher elasticity. It was inferred that the hand-made noodle dough underwent repeated processes of folding and extending, resulting in better developed of the gluten structure. Consequently, the hand-made noodles were determined to be different than the machine-made noodles in terms of instrumental measurements and sensory observations, suggesting that the hand-made noodles had superior textural properties.

  • PDF

Quality Characteristics of Domestic Wheat White Bread with Substituted Nelumbo nucifera G. Tea Powder (백련차 분말을 대체한 우리밀 식빵의 품질 특성)

  • Kim, Young-Sook;Kim, Mun-Yong;Chun, Soon-Sil
    • The Korean Journal of Food And Nutrition
    • /
    • v.21 no.4
    • /
    • pp.448-456
    • /
    • 2008
  • In this study, domestic wheat white breads were prepared with the substitution of 1.5, 3.0, 4.5, and 6.0% Nelumbo nucifera G. tea powder(NNTP). The samples and a control were then compared with regard to quality characteristics, including pH, total titratable acidity, fermentation power of dough expansion, specific volume, baking loss, moisture content, color, textural characteristics, external and internal surface appearances, and sensory qualities in order to determine the optimal ratio of NNTP in the formulation. As the NNTP contents increased, the pH of dough and bread, baking loss, and lightness decreased, whereas the total titratable acidity of dough and bread increased. The fermentation power of dough expansion increased with increasing incubation time. The NNTP samples evidenced significantly higher specific volume, greenness, yellowness, resilience, and crumb consistency than were observed in the control group. However, hardness and fracturability evidenced the opposite effect. The water content and uniformity of the crumb pores were highest at a substitution level of 1.5%, and were lowest at a level of 4.5%. Crumb color, flavor, and delicious taste decreased with increasing NNTP contents, whereas lotus leaf flavor, astringency, bitterness, and off-flavor increased. Density of the crumb pore and crumb springiness were not significantly different among the samples. Softness, chewiness, and overall acceptability were maximal with the 1.5% substitution, and were minimal in the 6.0% group. In conclusion, our results demonstrate that $1.5{\sim}3.0%$ NNTP may prove quite useful as a substitute for domestic wheat flour in the production of white bread, and may evidence favorable nutritional and functional properties.

Quality Characteristics of White Bread with Barley Leaves Tea Powder (보리잎차 분말을 대체한 식빵의 품질 특성)

  • Yeom, Kyung-Hun;Kim, Mun-Yong;Chun, Soon-Sil
    • Korean journal of food and cookery science
    • /
    • v.26 no.4
    • /
    • pp.398-405
    • /
    • 2010
  • In this study, white bread was prepared containing 1.5, 3.0, 4.5 or 6.0% barley leaves tea powder (BLTP). The samples along with a control were then compared regarding their quality characteristics, including pH, total titratable acidity, fermentation power of dough expansion, specific volume, baking loss, moisture content, color, textural characteristics, internal surface appearances and sensory qualities, all to determine the optimal ratio of BLTP. As the BLTP content increased, the pH of the dough and bread and the lightness decreased, whereas the total titratable acidity increased. The fermentation power of dough expansion increased with a longer incubation time. The control group was evidenced by a significantly higher specific volume and baking loss than that observed in the BLTP samples. However, greenness and yellowness evidenced the opposite effect. Hardness was highest at a substitution level of 1.5% and lowest at a level of 4.5%. Fracturability and resilience were not significantly different among the samples. For the internal surface appearance, darkness and greenness increased both increased at higher BLTP content. In the sensory evaluation, color, flavor and overall acceptability were highest in the control bread samples but minimal at a substitution level of 6.0%. Softness was the highest at the 3.0% substitution level and lowest in the control bread samples. Barley leaf flavor, astringency, bitterness and off-flavor increased as the BLTP content increased. Delicious taste was not significantly different among the samples. In conclusion, the results demonstrated that 4.5% BLTP may prove quite useful as a substitute for wheat flour in the production of white bread and may provide favorable nutritional and functional properties.

Optimization of the Extrusion Processing Conditions of Soymilk Residue and Corn Grits Mixture (두유박과 옥분 혼합물 압출성형 제조공정의 최적화)

  • 한규홍;김병용
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.32 no.8
    • /
    • pp.1270-1277
    • /
    • 2003
  • The extrusion conditions of the soymilk residue and corn grits mixtures were optimized. The experiment was designed according to the D-optimal design of response surface methodology (RSM), which shows 18 experimental points including 4 replicates for three independent variables (screw speed, water content and die temperature). The responses variables such as bending force, expansion ratio, bulk density, water solubility index (WSI), water absorption index (WAI), and color values (L*, a*, b*) were evaluated using response surface analysis. Expansion ratio and WSI decreased with increasing water content, whereas bulk density tended to increase with increasing water content. While greater screw speeds enhanced WSI and yellowness, higher moisture contents decreased the expansion ratio and WSI value. However, die temperature did not influence upon the response variables. The optimum extrusion conditions by numerical and graphical methods were similar: the screw speed, water content, and die temperature were 250 rpm, 22.43% and l28.16$^{\circ}C$ by the numerical method; 250 rpm, 22.43%, and 128.02$^{\circ}C$ by graphical method.

Population Structure, and Emergence and Growth Dynamics of Seedling, and Spatial Distribution of Dendropanax morbifera Lev.(Araliaceae) (황칠나무의 집단구조와 치수의 발생과 생육동태 및 공간분포)

  • 정재민
    • Korean Journal of Plant Resources
    • /
    • v.11 no.3
    • /
    • pp.345-352
    • /
    • 1998
  • A Korean endemic and evergreen small tree ' Dendropanax morbifera $L_{EV}$.(Araliaceae)' is a component of evergreen forest and mainly idstributein sourthern region and islands in Korea. A local population of D. morbifera which is located between evergreen and deciduous forest within 50m x 50m quadrate was investigated to ascertain the change of population structure, emergence and growth dynamics of seedlings and saplings, and pattern of spatial distribution by the temproal and spatial expansion of population . The result of analysis of population structure by Importnace Value(IV), evergreen forest showed a high species diversity of evergreen tree species such as Cinnamomum japonicum, Machilus japonica, Neolitsea serica, Daphniphyllum macropodum, Ligustrum japonicum, and etc, in middle and under story than in upper story where Camelia japonica and Quercus acuta were dominant. And in conterminous deciduous fores, the major component of evergreen forest in this region, Camellia japonica, Quercus acuta, evergreen tree of Lauraceae and etc. were abundant in only under story. IV of D. morbifera differed from among three story. In comparative analysis of emergence and growth dynamics of D. morbifera seedlings and saplings between evergreen and deciduous forest, emergece and density of seedlings were significantly greater in evergreen than in deciduous forest, and growth of height and basal diameter of seedlings and saplings were slightly larger in evergreen than in deciduous forest. The spatial distribution patterns by Moristia's index mapping of indivuduals using a lattice method of XY axis within this population showed that seedlings(age up to 2 years) and saplings (age>2 years and height<1m) both evergreen and deciduous forest were more or less aggregated apart from mature trees, and thougth intermediate trees(height>1m and dbh<10cm) had a aggregated distribution pattern, mature trees(dbh>10cm were uniform. In conclusion , the expansion of D. morbfera population from evergreen to deciduous forest accompanied with a mumber of evergreen woody species, and also, emergence and recruitment, and growth of seedlings were greatly influenced moisture and canopy by around community structure.

  • PDF

Properties of Extracts from Extruded Root and White Ginseng at Different Conditions (압출성형 공정변수에 따른 건조수삼과 백삼 압출성형물의 침출속도 및 침출물 특성)

  • Kim, Bong-Soo;Ryu, Gi-Hyung
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.34 no.2
    • /
    • pp.306-310
    • /
    • 2005
  • The comparison in release rate constant and properties of extracts from extruded raw ginseng and extruded white ginseng was conducted to apply extrusion process for manufacturing of released ginseng tea bag. Dry raw ginseng and white ginseng powder were extruded at 20∼30% moisture content and 200∼300 rpm by using an experimental twin-screw extruder. Browness and redness (both indicated the releasing of saponin and ginsenosides) were increased with the increase in the screw speed and the decrease of moisture content. Crude saponin and water solubility index (WSI) of both ginseng also share the same behaviour against the level of screw speed and moisture content, as well as browness and redness. The particle size effects of extruded raw ginseng at 20% and 28% moisture content on absorbance of released extract at 260 up to 560 nm, WSI, and water absorption index were determined. While particle size decreased from 800∼1000 nm to 200∼500 nm, absorbance and WSI are decreased. Absorbance and WSI shown increasing level while moisture content was decreased. In conclusion, the formation of pores by expansion and disruption of cell wall in extrusion cooking were obviously responsible to increase the amount of released extract of extruded ginseng and its WSI as well. The extrusion process turns out be the efficient process for manufacturing of commercial ginseng tea product than those of other thermal processes.

Effect of extrusion process variable on physicochemical properties of extruded rice snack with mealworm (압출성형 공정변수가 갈색거저리 애벌레(mealworm) 첨가 쌀 팽화 스낵의 이화학적 특성에 미치는 영향)

  • Cho, Sun Young;Jeong, Da Hye;Ryu, Gi Hyung
    • Korean Journal of Food Science and Technology
    • /
    • v.49 no.4
    • /
    • pp.444-452
    • /
    • 2017
  • This study aims to investigate the physicochemical properties of the extruded rice snack with added the containing mealworm. Adding the mealworm addition enhanced protein and unsaturated fatty acid contents, which are insufficient in rice. As the extrusion process variables, the death temperatures and moisture content were set to at respective 130 and $140^{\circ}C$, and 20 and 25%, respectively. The expansion ratio increased as with death temperature, whereas the increased moisture content decreased. The nitrogen solubility index and protein digestibility index increased with the added mealworm content of mealworm increased. As mealworm content and death temperature, and moisture content increased, DPPH radical scavenging activity significantly increased but the rancidity decreased. As the result of this study, confirmed that the addition of mealworm to the extruded rice snack was the confirmed as the effective process to improve nutrition, and antioxidation. Also, death temperature and moisture content have an effect on softened the texture of extruded rice snack.