• 한국안전학회지
• /
• 제12권1호
• /
• pp.71-76
• /
• 1997

In this paper, it was described results of study on curing safety of molding meterial, about the variation of phenol resin contents, wood flour contents and moisture of wood flour, under the same condition. The experimental results are summarized as follows ; 1) When the curing temperature was high, the curing time was short in the case of 4～8wt% moisture of wood flour, but in the case of more than l2wt% moisture of wood flour, the curing time was long. 2) The curing time for curing temperature was more short when 6wt% moisture of wood flour than 4wt% moisture of wood flour. 3) The more wood flour content and moisture of wood flour content, the longer curing time and the more mineral filler content, the shorter curing time. 4) When the phenol resin content of main matrix increase, the curing time was short.

• Journal of Electrical Engineering and information Science
• /
• 제2권4호
• /
• pp.72-78
• /
• 1997

A free space transmission method using standard gain horn antennas in the frequency range from 9.0 to 10.5GHz is applied to determine the dielectric properties of grain such as rough rice ,brown rice and barley. The dielectric constant and loss factor, which depend on the moisture content of the wetted grain are obtained from the measured attenuation and phase shift by vector network analyzer. The moisture content of grain varied from 11 to 25% based on this wetted condition. The measured values of dielectric constants as a function of moisture density are compared with values of those obtained using he predicted model for estimating dielectric constants of grain. The effect of density fluctuation, high is an important parameter governing the dielectric properties of grain, on the dielectric constant and loss factor is presented. A new density-independent model in terms of measured attenuation an moisture density is proposed of reducing the effects of density fluctuation on the moisture content measurement.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.901-905
• /
• 2008

This study was conducted to clarify the heat load characteristics and heat and moisture behavior of underground structures. The authors achieved this by carrying out a numerical analysis using simple heat diffusion and simultaneous heat and moisture transfer equations based on measurement data. This paper presents the results of a numerical analysis on the heat load characteristics and heat and moisture behavior of an underground basement and its surrounding ground under a condition of internal heat generation. The authors found it difficult to predict the heat behavior and heat load of the underground basement by simple heat diffusion alone. Accurate prediction of the thermal environment and heat load requires careful consideration of the influences of moisture and precipitation

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.445-448
• /
• 2004

Recently, bridge deck overlay with latex modified concrete is widely applied in domestic. the capacity of bridge deck overlay depends on bond state on the surface. factors that have an effect on bond state are clean condition on the surface, absence of surface microcracking, absence of laitance, overlay curing. In this study, it is researched that characteristic of bond strength according to moisture condition on the surface and the removal method of concrete. As a result, it shows high bond strength in dry condition when w/c is $31\%$ and in moisture condition when w/c is $38\%$ respectively. characteristic of bond strength according to the removal method of concrete shows high bond strength when using water-jets rather than jackhammers.

• 한국조경학회지
• /
• 제31권2호
• /
• pp.83-93
• /
• 2003

This study was conducted for an understanding of a threatened plant species,“Penthorum chinense”, which is a vegetation structure and environmental characteristic in the southern part of Ibaraki, Japan. We selected distribution and contiguity area where P. chinense is not distributed and we set up 69 sites by the quardrat method. The surveyed general characters in each site include mean-height, mean-coverage, moisture condition water depth coverage and depth of litter layer. We calculated the degree of succession by the survey data and grasped the main distribution area, vegetation structure, growth environment of P. chinense by TWINSPAN classification and DCA ordination. The results of this study are as follows. First, P. chinense habitat was categorized into the riverside and abandoned paddy fields. The riverside was influenced by natural disturbance caused by flooding and drought. These conditions led to a poor P. chinense growth. The abandoned paddy fields as the artificial disturbance area have high potential value, because the area can preserve P. chinense growth space by succession control and water management. second, we executed TWINSPAN analysis based on vegetation coverage data of survey sites. The vegetation types were classified into the three categories: annual plant flora(P. chinense dominates in wet state), perennial plant flora(Solidago altissima dominates in dry state), and perennial plant flora(Phragmites communis dominates in wet state). Third, the data was ordinated by DCA. The sample sequences along the first and second DCA axes effectively reflected moisture condition, number of species, mean height, coverage of litter layer and degree of succession. Especially, P. chinense flora has the high correlation with moisture condition and number of species.

• 한국도로학회논문집
• /
• 제9권1호
• /
• pp.47-56
• /
• 2007

교통하중하의 포장구조에 대한 설계나 비선형 해석에 있어 도로하부 재료의 회복변형 특성이 활용되고 있다. 그러나 국내에서의 관련 연구가 매우 미진한 실정이다. 또한 매우 제한적인 범위의 자료만이 노상토의 회복탄성계수를 추정하는데 활용되고 있다. 이에 본 논문에서는 시험도로 입상 노상토를 대상으로 비선형 특성을 알아보기 위하여 반복재하 회복탄성계수 시험을 수행하였다. 현장조건을 반영하여 함수비와 응력조건을 고려한 회복탄성계수 구성방정식을 제안하였다. 이를 통하여 응력조건을 고려한 회복탄성계수 예측모델과 적합한 응력의존 모델을 결정하고 계절적인 함수비 변화가 고려된 회복탄성계수 모델을 각각 비교하였다.

• 콘크리트학회논문집
• /
• 제13권5호
• /
• pp.507-515
• /
• 2001

신.구 콘크리트 부착계면의 부착강도는 신 콘크리트에 라텍스를 이용하여 개선할 수 있다. 그러나, 현재까지 신.구 콘크리트 사이의 부착강도를 측정하기 위해 표준으로 채택되어진 실험은 아직 없다. 일축인장시험에서, 신.구 콘크리트 계면의 부착강도는 시험체의 파단 시 인장에 의해 실제적으로 구해진다. 본 연구에서 새로이 제시한 직접인장 부착강도 실험으로 라텍스 개질 콘크리트의 부착특성을 평가하고자 하였다. 새로이 제시되는 직접인발 부착강도 실험을 위하여 현장과 같은 조건의 슬래브를 제작하여 pull-out 실험을 실시하였으며, 기존의 시편을 이용한 직접인장 실험 시편을 제작하여 본 연구에서 사용하였다. 실험결과는 다음과 같다: 라텍스 혼입율 증가에 따라 부착강도는 증가하는 것으로 나타났다. 이를 통해 라텍스에 의한 부착력증진을 확인할 수 있었다. 또한, 기존 콘크리트의 표면처리에 따른 라텍스 개질 콘크리트의 부착특성을 평가한 결과, 표면처리에 따라 라텍스 개질 콘크리트의 부착강도가 개선되는 것으로 나타났다. 기존 콘크리트의 표면함수상태에 따른 라텍스 개질 콘크리트의 부착특성을 평가하기 위해서 다양한 표면함수상태에서 부착강도를 평가한 결과, 표면건조포화상태가 가장 이상적인 조건임을 알 수 있었다.

• 한국농공학회지
• /
• 제28권3호
• /
• pp.99-106
• /
• 1986

This study was carried out to investigate the effects of moisture content, temperature, C/N ratio and pH of the sewage sludge mixed with hulle and sawdusts for making compost under aerobic condition and to improve the defect of the structure of experimental equipment heat lose and handling method. and obtained results were as follows 1.The temperature was reached 73$^{\circ}$ C around 50 hours fermentation in the condition of 0.8 L/min. of air and 60.4% of moisture content. and favorable moisture content of initial condition ranged from 50 to 65% 2.The temperature near bottom of the batch composter was decreased due to evaporate water vapor and lose the heat produced during aeration. and it is required to be improved. 3.The temperature in the batch composter from the center to the inside wall surface was gradually decreased. the temperatures of the points located in r=9cm and the wall surface were 4$^{\circ}$ C and 6$^{\circ}$ C respectively. and therefore it is required to be insulated. 4. The maximum C02 production was obtained as 7.3% per volume in the temperature of 63$^{\circ}$C at the moisture content of 60% 5.The temperature range of active microbes growth was found to be as 20$^{\circ}$C to 40$^{\circ}$C in the case of mesophiles and 50$^{\circ}$C to 65$^{\circ}$C in the case of thermophiles due to increase and decrease C02 production. 6.C/N ratio after decomposition was 1.3 to 2.6 smaller than that of initial one due to increase the amount of nitrogen. The more C/N ratio increased. the less the reaction velocity decresed. The optimum of it as found to be 30. 7.pH values after decomposition were slightly increased than that of initial ones. The reaction velocity was decreased at acid and alkall condition. Therefore it is neseseary to neutralize the medium to improve the reaction.

• Journal of Nutrition and Health
• /
• 제43권3호
• /
• pp.233-245
• /
• 2010

The purpose of this study was to investigate the effects of dietary habits and nutrient intakes on skin condition of female university students. The subjects were 95 female university students in Daegu. This study examined anthropometric measurements, dietary intake, food intake habits and skin condition (moisture, elasticity, sebum (U-zone, T-zone), pores, evenness and melanin pigmentation. The subjects in this study had an average age of 21.4, an average height and weight of 161.2 cm and 52.9 kg, respectively, and the average body mass index (BMI) was 20.3 $kg/m^2$. The means of skin elasticity, pores, evenness, and melanin pigmentation were within the normal range of women in their 20s and the skin moisture state was slightly lower than the normal range, which showed a dry tendency. The sebum in the U-zone and the T-zone was lower than the standard values, which showed less secretion in both areas. The subjects with high nut intake showed a better skin pore state (p < 0.05). Those with a high intake of instant foods showed a sig-nificantly low skin moisture and a significantly higher sebum rate (p < 0.05). The group with high skin elasticity and the group with less melanin pigmentation showed a significantly low animal protein intake (p < 0.05). The group with high skin elasticity also showed a significantly higher vitamin A and niacin intakes as well (p < 0.05). The group with high skin evenness showed a significantly lower animal lipid intake and a significantly higher vitamin E intake (p < 0.05). In addition, those with high skin elasticity and evenness as well as low melanin pigmentation showed a tendency of high intake of antioxidant vitamins, such as vitamin A, carotene, vitamin C or vitamin E. In summary, a moderate intake of plant-based products and also the antioxidant vitamins within such products seems to have a beneficial effect on maintaining a healthy and good skin condition.

• 한국농공학회논문집
• /
• 제57권3호
• /
• pp.65-76
• /
• 2015

Estimating water requirements for upland crops are characterized by standing soil moisture condition during the entire crop growth period. However, scarce rainfall and intermittent dry spells often cause soil moisture depletion resulting in unsaturated condition in the fields. Changes in rainfall patterns due to climate change have significant influence on the increasing the occurrence of extreme soil moisture depletion. Therefore, it is necessary to evaluate agricultural drought for upland crop water planning and management in the context of climate change. The objective of this study is to predict the impacts of climate change on agricultural drought for upland crops and changes in the temporal trends of drought characteristics. First, the changes in crop evapotranspiration and soil moisture in the six upland crops, such as Soybeans, Maize, Potatoes, Red Peppers, Chinese Cabbage (spring and fall) were analyzed by applying the soil moisture model from commonly available crop and soil characteristics and climate data, and were analyzed for the past 30 years (1981-2010), and Representative Concentration Pathways (RCP) climate change scenarios (2011-2100). Second, the changes on the temporal trends of drought characteristics were performed using run theory, which was used to compare drought duration, severity, and magnitude to allow for quantitative evaluations under past and future climate conditions.