• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.9
• /
• pp.656-661
• /
• 2013

In this study, the moisture content, charge discharge current, electrostatic capacity and dielectric loss tangent are measured for the specimen of bisphenol type epoxy resin which is mixed with squared amorphous silica filler and dipped in hot water of $50^{\circ}C$ for 169 days. The results of this study are listed below. The longer of deposition day, the charge and discharge current was increased. It is considered that the reason is because there was water attack through the squared silica surface. The longer of deposition day, the absorption rate of all specimens was increased. It found that the absorption rate reached saturated state after 100 days. The higher frequency and the longer of deposition day, the $tan{\delta}$ was decreased. Also, It found that the $tan{\delta}$ and electrostatic capacity of the specimen which is mixed with squared filler are greater.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.6 no.1
• /
• pp.53-59
• /
• 1986

The effects of soil moisture on seasonal changes of photosynthesis, transpiration and stomatal resistance were studied in sorghum (Pioneer 931) and sorghum - sudangrass hybird (Pioneer 988) at Suweon in 1985. Soil moisture was maintained with approximately 100, 80, 60 and 40% of field moisture capacity in large concrete pot (12m length $\times$ 1m width $\times$ 1m depth). 1. Photosynthesis and transpiration showed a sharp seasonal changes and reacted similarly to water stress and environmental factors, and were the highest in the middle of August, and were the lowest in the beginning of October. Sorghum - sudan hybird had better photosynthesis, transpiration and stomatal control than those of sorghum in hot summer season. 2. The rate of photosynthesis of 60 and 80% field moisture capacity was higher than that of 100 and 40% throughout growing season, but the effect of soil moisture on photosynthesis varied seasonally by climate factors. Optimum soil moisture was 60% in early summer and fall, and was 60 - 80% in hot summer season. 3. Drought and over-moisture affected physiological metabolism of plant, and so the dry matter yield of 40 and 100% field moisture capacity decreased by 70% compared with that of 60% field moisture capacity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4A
• /
• pp.373-384
• /
• 2009

For the first step on the quantitative evaluation of shrinkage reduction and differential shrinkage analysis of lightweight aggregate concrete, this study sets the moisture transport model of concrete by pre-absorbed water of porous lightweight aggregates and measured effective moisture diffusion coefficient, moisture capacity, degree of humidity supply and degree of humidity consumption by water binder ratio and aggregate type. The effective moisture diffusion coefficient in steady state caused by humidity difference between inside and outside of concrete had low value as low water-binder ratio. And in case of same water-binder ratio, effective moisture diffusion of mixtures used normal aggregates were lower than those used lightweight aggregates. To determine moisture store capability of concrete - moisture capacity, moisture contents were measured in 9 humidity conditions. As a result moisture contents of mixtures used lightweight aggregates was higher than mixtures used normal aggregates in all humidity conditions. This study measured lightweight aggregates' degree of humidity supply that applicable to normal atmospheric environment (above RH 50%) and made it quantitatively. Also amount of moisture release was set as a exponential function that represents a clear trend proportion to time and inverse proportion to humidity of the surroundings. As the result of measurement about degree of moisture consumption inside concrete following the internal consumption caused by cement hydration self-drying, it was showed that rapid decrease of humidity, around 10%, at early ages (7~10 days) when water-binder ratio is 0.3 and slow decrease around 5% and 1% when water-binder ratio is 0.4 and 0.5.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.3
• /
• pp.46-51
• /
• 2005

This study was to evaluate sorption and biodegradation rate affecting the natural dissipation of chlorinated volatile organic compounds (CVOCs) in surface soil. To show the effect of sorption and biodegradation on the natural dissipation of 1,1,1-trichloroethane (TCA), trichloroethylene (TCE) and tetrachloroethylene (PCE), three types of vial experiments were employed; (1) sterilized, (2) non-sterilized, (3) non-sterilized/substrate enriched. Also three moisture contents was applied to find the moisture effect in each vial; (1) wilting point (12%, w/w), (2) field capacity (29%, w/w), (3) saturation (48%, w/w). The results suggested that keeping the soil moisture content at field capacity was desirable for TCA and TCE natural dissipation in the vial study.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.147-147
• /
• 2022

In January 2021 heavy flood affected South Kalimantan with causing many casualties. The heavy rainfall is predicted to be generated due to the ENSO (El Nino-Southern Oscillation). The weak La-Nina mode appeared to generate more convective cloud above the warmed ocean and result in extreme rainfall with high anomaly compared to past historical rainfall event. Subsequently, the antecedent soil moisture distribution showed to have an important role in generating the flood response. Saturated flow and infiltration excess mainly contributed to the runoff generation due to the high moisture capacity. The hydro-meteorological processes in this event were deeply analyzed using the coupled atmospheric model of Weather Research and Forecasting (WRF) and the hydrological model extension (WRF-Hydro). The sensitivity analysis of the flood response to the SST anomaly and the soil moisture capacity also compared. Result showed that although SST and soil moisture are the main contributors, soil moisture have more significant contribution to the runoff generation despite of anomaly rainfall occurred. Model performance was validated using the Global Precipitation Measurement (GPM) and Soil Moisture Operational Products System (SMOPS) and performed reasonably well. The model was able to capture the hydro-meteorological process of atmosphere and hydrological feedbacks in the extreme weather event.

• Journal of Environmental Science International
• /
• v.4 no.1
• /
• pp.1-12
• /
• 1995

The assessment for a degree of drought has been carried out based on the soil moisture index in Korea. The soil moisture index(Im) was calculated assuming of constant evapotranspiration until wilting point as Im = w2/wf $.$100. The soil moisture content(W2) at the final of a period is obtained from W2 : Pe + Wl - E, here the effective precipitation amount is Pe, evapotranspiration E, and the soil moisture content at the beginning of a period is Wl. The filed capacity(Wf), as a mean value of fine sandy loams, was reduced to 92 mm/ft when we accept the wilting point and the available soil moisture content of 42 mm/ft, respectively. The drought begins in Korea when the soil moisture index drops to less than 50%. The value coincides the isoline of 11 or more consecutive days without measureable precipitation. The soil moisture index frequently drops in the northern part of Youngnam area and Honam area so that both areas are well known as the areas of drought. Key word : Droughts, Soil Moisture Index.

• Advances in concrete construction
• /
• v.13 no.6
• /
• pp.423-431
• /
• 2022

Although the influence of moisture content on the mechanical properties of concrete has been studied for a long time, research related to its influence on the damping and energy dissipation property of concrete structure is still very limited. In this paper, the relationship between damping property and moisture content of concrete using cyclic uniaxial compression is firstly presented, and the mechanism of the influence of moisture content on concrete damping and energy dissipation capacity is analyzed. Based on the experimental research, moisture-related damping and energy dissipation model is proposed. Results show that the dissipated energy of concrete and loss factor increase as the moisture content increasing. The energy dissipation coefficient reflecting the influence of stress level of concrete under cyclic load, decreases first and then increases as the moisture content increasing. The mechanism of moisture-related energy dissipation behavior can be divided into the reactive force of water, the development of the internal micro cracks and the pore water pressure. Finally, the proposed moisture-related damping and energy dissipation model are verified.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.111-118
• /
• 2008

The purpose of this paper was to investigate the overburden effect on soil-water characteristic curve and unsaturated permeability of unsaturated weathered soils. For this, unsaturated suction and permeability tests under various overburden stress were conducted respectively. Then, the coefficient of unsaturated permeability and moisture capacity of weathered soils were estimated and compared. All these results are presented in the paper.

• Journal of Biosystems Engineering
• /
• v.28 no.1
• /
• pp.1-10
• /
• 2003

A computer simulation was carried out to determinate the optimum capacity of bulk type trailer which is used as a tractor attachment. Soil physical properties. such as soil moisture content. bulk density, soil hardness and soil texture were measured in the 10 major rice production area for computer simulation. Mathematical model which include soil physical properties and vehicle factor was used for computer simulation. Most of the soil texture of the investigated area was silty loam. Soil moisture content ranged between 30 and 40% mostly. Soil bulk density was in the range of 1.500 to 1.700 kg/㎥. Soil hardness ranged between 1 to 18 kg/$\textrm{cm}^2$. Soil hardness incorporate the effects of many soil physical properties such as moisture content texture and bulk density, and so the range of soil hardness was greater than any other physical properties. The capacity of bulk type trailer was above 3000 kg$_{f}$ fer the most of the investigated area. and mostly in the range of 4000 to 6000 kg$_{f}$ depending upon the slip. But for the soft soil area such as Andong and Namyang. tractor itself had mobility problem and showed minus trailer capacity for some places. For this area. the capacity of bulk type trailer ranged between 1000 and 2000 kg$_{f}$ mostly so bulk type trailer should be designed as a small capacity compared to the other area.ared to the other area. area.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.480-489
• /
• 2010

We investigated the functional characteristics of commercial wood charcoal in Korea and their application as functional raw materials. The areas of analysis were anatomical features, elementary composition, mineral composition, caloric values, anion and far-infrared ray emission, and moisture absorption capacity. Based on the analyses as above mentioned, it is considered that charcoal can be evaluated as functional raw material. In commercial wood charcoal in Korea, there were highly varied depending on manufacturing methods as black charcoal, white charcoal and mechanical charcoal and manufactures for elementary composition, mineral composition, anion emission, far infrared ray emission. Especially, black charcoal showed lower moisture absorption capacity than white charcoal and mechanical charcoal. For charcoal as functional raw material, selective usage are needed based on the analyses of anatomical features, elementary composition, mineral composition, caloric values, anion and far-infrared ray emission, and moisture absorption capacity. Specific charcoal making methods for improving specific functionality, required as functional raw material, are necessary in further research.