• Nuclear Engineering and Technology
• /
• v.10 no.4
• /
• pp.195-201
• /
• 1978

The radiation-induced graft polymerization of methacrlic acid and methyl methacrylate onto a polyester fabric was investigated with ${\gamma}$-ray as the radiation source, and the rate of grafting was examined. When acrylic acid, methacrylic acid, and methyl methacrylate were grafted onto a polyester fabric, grafting efficiency was depened upon the dielectric constant of the solvent in the monomer mixture. The yield of the graft polymerization was related to the total dose, the concentration of the monomer, and the concentration of the swelling agent. The melting point and the glass transition temperature of MA and MMA grafted copolymers were analysed by means of DTA. Physical properties, such as the moisture regain, the antistatic property, and the wicking time were measured.

• Textile Coloration and Finishing
• /
• v.8 no.2
• /
• pp.64-70
• /
• 1996

Wool yarns were treated in dimethylformamide solutions containing various concntrations of three dibasic acid anhydrides: succinic, itaconic, and phthalic arthydrides in various conditions. The structurl aspects of these dibasic acid anhydries are different: succinic, itaconic, and phthalic acid arthydrides have saturated aliphatic ethylene, unsaturated aliphatic vinyl and aromatic phenyl one groups, respectively. The properties of acylated wool keratin are as follows: Decreasing amino group and increasing carboxyl group by acylation lowered the hydrophilic property, and then moisture regain, and decreased acid dye uptake and enhanced cationic dye uptake of wool keratin. In the case of phthalic acid anhydries, in spite of lowest acyl content, the minimum of moisture regain was resulted from the bulk benzen ring, occuping much more voids on wool keratin molecules than other reagents. Acid solubility was increased by the decrease of amino group and hydrogen bonding by acylation. Alkali solubility was also increased formation of new amide group on the side chain of keratin, which can be degraded easily by alkali. In the case of phthalic acid anhydride, the relative high solubility was resulted from the much higher molecular weight of dissolved fractions. The surface of wool keratin was not damaged by treatment with any acylating agent.

• Textile Coloration and Finishing
• /
• v.10 no.5
• /
• pp.39-47
• /
• 1998

The purpose of this study was to investigate the effect of alkali treatment on EG solution of polyester/silk union cloth(P/S cloth) . Tensile strength, moisture regain, crease resistance, and reduction ratio of the treated P/S cloth were measured. The results of this study were as follows ： 1) The weight loss of P/S cloth treated with EG solution was three times higher than those of P/S cloth treated with $H_2O$. The weight loss of P/S cloth was increased greatly with increasing concentration of NaOH, temperature, and time. Favorable weight reduction of treating condition could be obtained when lower concentration of NaOH was used with longer time. 2) If it was added $H_2O$ on EG solution, weight loss of polyester increased, while those of silk decreased. In addition, decreasing ratio of tensile strength warp direction (polyester) was lower, while those of weft direction(silk) was higher. 3) Moisture regain of P/S cloth treated with EG solution increased with weight loss up to 10% . Crease resistance of P/S cloth was the highest at weight loss of 10~15%.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.3
• /
• pp.287-297
• /
• 1994

The purpose of this study is to investigate the Improvement of fiber surface, tenacity & elogation, fabric counts, thickness, handle, moisture regain, static voltage, handle, dyeability when polyester fabrics are treated with NaOH solution adding quartemary ammonium salt (Benzyl dimetyl dodecyl ammonium chloride . BDMDAC) The results are as follows. I. In regard to the method of processing VET, when the PET fabrics are alkaline-hydrolyzed adding BDMDAC, the weight loss of PET fabrics increased remarkably to the increse of BDMDAC concentration than when they are treated only in NaOH solution. When PET fabrics are alkaline-hydrolyzed the amount of BDMDAC as the catalyst is proper lg/1 II. The change in physical & chemical properties of alkaline-hydrolyzed PET fabrirs. 1. As the amount of the weight loss on PET fabrics increased, the void space of the PET yale increased but tenacity & elongation and thickness decreased. 2. The fabric counts of PET increased due to shrinkage by alkaline-hydrolydzing. 3. As the amount of of the weight loss on PET fabrics increased. NUMERI, FUKURAMI, increaseed and KOSHI decreased and Total hand value(T.H.V) in all cases increaseed. When the weight Ioss is 30.9% T.H.V. is best. 4. Moisture regain of PET fabrics a little increased by alkaline-hydrolyzing treatment. As the weight loss increased, static voltage is decreased. 5. The last dye absorption is different according to the degree of the Affinity. In regard to the difference of dye color, the dyestuff of low molecular weight dyed for deep color.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.1
• /
• pp.87-95
• /
• 2000

The changes on shrinkage, dyeability, antimicrobial activities and other physical properties of wool fabrics by chitosan treatment were investigated. A acid dye, a basic dye and natural artemisia were used for dyeing of wool fabrics. For Antimicrobial test of wool fabrics, S.Aureus was used. As the results, The wool fabrics treated with chitosan showed a marked decrease in shrinkage. Dyeability increased slightly as concentration of chitosan treatment increased, Dyeability of acid dye was the highest than other dyes. On the other hand, the dyeability of basic dye on chitosan treated fabrics was lower than untreated fabrics. Reduction rates of colony of chitosan-treated wool fabrics showed from 64.8% to 85.24% as chitosan concentration increased. Reduction rates of colony of the chitosan-treated fabrics decreased by dyeing with acid and basic dye. But increased by retreating with chitosan. Fabrics dyeing with atremisia showed above 90% reduction rate against S.Aureus on all chitosan concentrations. The Tensile properties of chitosan-treated fabrics showed little decrease. The moisture regain and the air permeability was decreased on chitosan concentration on 0.1% but recovered as chitosan concentration increased. The warmth retention was increased a little by chitosan treatment. The drapeability became hard as chitosan concentration increased.

• Textile Coloration and Finishing
• /
• v.11 no.1
• /
• pp.34-41
• /
• 1999

To examine the increase of paper strength by solvent-bonding using N-methylmorpholine N-oxide (NMMO), a paper was treated with aqueous solutions of NMMO, concentrated at $90^\circ{C}$ for selected periods of time, and pressed for 5 seconds followed by washing and drying. The effect of the increasing NMMO concentration on bonding state and some important properties of samples were mainly investigated. With increasing concentration of NMMO, the degree of bonding between fibers was increased, the fiber cross-sectional shape was changed from 'thin ribbonlike' to 'round rodlike' by swelling with solvent, and the longitudinal waves (crimp) were introduced to fibers, hence the shrinkage, weight per unit area, and thickness of paper were increased. Consequently, the tensile strength and elongation, under standard and wet conditions, and the stiffness were increased, and the water absorption was decreased generally with increasing concentration of NMMO. The moisture regain of treated samples was lower than that of the untreated sample, because of the reduction of space between fibers. But the moisture regain was increased a little with increasing concentration of NMMO due to the fiber swelling with NMMO followed by structural relaxation.

• Textile Coloration and Finishing
• /
• v.22 no.3
• /
• pp.220-228
• /
• 2010

This study examines the scouring effect of pectinase on ramie fabric and influence of sodium sulfate as an activator for pectinase. The scouring effects were measured by the weight loss and pectin contents. SEM, weight loss, stiffness, moisture regain and dye ability of ramie fabric teated with pectinase/sodium sulfate were also measured. When ramie fabrics were desized with $\alpha$-amylase, the optimum conditions were pH 6.5 at $60^{\circ}C$ for 80 min with 1%(o.w.f) $\alpha$-amylase concentration. When ramie fabrics were scoured with pectinase, the optimum conditions were pH 8.5 at $55^{\circ}C$ for 30 min with 10%(o.w.f) pectinase concentration. Addition of sodium sulfate improved enzyme activity significantly, which increased proportionally with increasing sodium sulfate concentration. When 50 g/l of sodium sulfate was added, the surface became cleaner compared to the enzyme treatment without salt: weight and tensile loss, moisture regain and dyeability of the treated fabrics increased, while pectin contents and stiffness decreased. Therfore, sodium sulfate was effective activator for the pectinase treatment of flax fiber.

• Textile Coloration and Finishing
• /
• v.5 no.4
• /
• pp.79-91
• /
• 1993

The purpose of this study is to prepare the newer, more comfortable of urea-formaldehyde resin finished fabrics. The methods of this study are by making examinations and comparisons the relations between the thickness, fabrics counts, weight, moisture regain and crease recovery of cotton and viscose rayon fabrics caused by condition of urea-formaldehyde resin finishing and warm retaining ability and warm-cool sense. The analytic results of thermal character in state of fabrics material finished with urea-formaldehyde are as follows: 1. The warm retaining ability has no correlation with mixing ratio of resin but the increase of the warm retaining ability has correlation with the increase of concentration of urea-formaldehyde resin. 2. The result pf multiple regression analysis for effect of physical property according to the concentration of resin to the warm retaining ability revealed as below. As the weight, thickness and density increase and moisture regain decreases, the warm retaining ability increases. 3. The qmax value has no correlation with mixing ratio of resin but the increase of the qmax value has correlation with the increase of resin concentration. In the end, the effect of it promotes cool sense. 4. The result of multiple regression analysis for effect of physical property according to the concentration of resin to the qmax value revealed as below. As he weight and thickness increase, the qmax value decrease. But, as the density and crease recovery increase, the qmax value increase.

• Textile Coloration and Finishing
• /
• v.9 no.5
• /
• pp.42-51
• /
• 1997

The purpose of this article is to investigate the effect of $O_{2}$ low temperature plasma treatment oft chitosan treatment of polyester fabrics. Moisture regain, static charge, crease resistance and reduction ratio of the treated fabric were measured. The results of this study were as follows: The add-on ratio and. the moisture regain of polyester fabrics treated with chitosan after treated by plasma(CP PET) were higher than those of polyester fabrics treated with only chitosan(C PET). The static charge of polyester fabrics decreased greatly with increasing the concentration of chitosan. A durability for laundering of CP PET was higher than those of C PET. The crease resistance of polyester fabrics decreased with ihcreasing the concentration of chitosan continuously. CP PET had higher decreasing rate and better durability than C PET. It showed that chitosan-treated polyester fabrics had over 90% reduction ratio after 10 times of laundering, and CP PET had better reduction ratio than C PET.

• Journal of the Korean Home Economics Association
• /
• v.25 no.2
• /
• pp.31-38
• /
• 1987

This paper aims to examine the velocity of water absorption of cotton, hemp, and T/C fabrics sized by rice, wheat, potato, corn flour and pp.V.A.. Experimental variables such as the concentration of sizing agents, the moisture regain of unsized fabrics and the ironing temperature showed the following results. 1. When the fabrics were sized, the velocity of water absorption increased according to the order of corn, rice, potato, wheat flour and pp.V.A. for cotton fabrics, of corn, potato, rice, wheat flour and pp.V.A. for hemp fabrics, and of corn, wheat, rice, potato flour and pp.V.A. for T/C fabrics; corn flour showed the highest velocity of water absorption and pp.V.A. did the lowest among all the others mentioned above. 2. The higher fabric density, the higher velocity of water absorption. The finer the count of fabric yarn, the higher velocity of water absorption. 3. The material of sized fabrics most affected the velocity of water absorption than other factors of those. 4. To a certain extent, the higher the concentration of sizing agent, the higher the velocity of water absorption. 5. The fabrics with moisture regain of 20% before sizing showed the highest velocity of water absorption. 6. The ironing temperature after sizing fabrics mentioned below showed the highest velocity of water absorption; 180$^{\circ}C$ for cotton, 200$^{\circ}C$ for hemp, and 160$^{\circ}C$ for T/C fabrics.