• The Korean Journal of Food And Nutrition
• /
• v.33 no.6
• /
• pp.666-671
• /
• 2020

To analyze the quality characteristics of soybean (Glycine max), the approximate analysis, physical properties, mineral and free sugar content of domestic soybean cultivars were analyzed. The moisture content was about 9.15~11.84%. The fat content of Cheonga, Taekwang, and Jinpung cultivars were 17.93~18.37%, which was significantly higher than that of others. Protein content of Cheonga and Seonyu were 36.15~36.70%, significantly higher than that of others. As for the weight and shape of soybeans, the Daewon was the largest allele, and the seed cover ratio was the highest in the Seonyu. In terms of water absorption rate, the Seonyu showed the highest absorption rate at 246.19%, and the Daewon showed the lowest absorption rate. Soaked soybeans had a hardness of 2.80~4.73 kg/㎠, which did not show low hardness in the sample with high moisture absorption. The grinded soybeans showed higher lightness and yellowness values than the raw soybeans, and the redness was decreased. Soybean minerals contained high K, P, Mg, and Ca content. Overall, The Taekwang contained more minerals than others. Stachyose, sucrose, glucose and fructose were detected as free sugars in soybeans. The total free sugar content of Taekwang was the lowest at 3.47%, and the Cheonga (6.80%) was the highest.

• Computers and Concrete
• /
• v.19 no.1
• /
• pp.69-78
• /
• 2017

This study aimed at exploring the effect of presoaking degree of lightweight aggregate (LWA) on the fresh and hardened properties of concrete. Two series (i.e., Series A and Series B) of concrete mixes that were made of LWA with different moisture states were prepared. The presoaking degree of LWA was divided into three types: oven dry state, 1 hour prewetted and 24 hours prewetted. For the Series A, the water content of the lightweight aggregate concrete (LWAC) mixes was adjusted in accordance with the moisture condition of the LWA. Whereas the amount of water added in the Series B mixes was deliberately not adjusted for the moisture condition of the LWA. Slump test, mechanical tests, interfacial transition zone microscopical tests and thermal conductivity test were carried out on the specimens of different concretes and compared with control normal-weight aggregate concretes. The test results showed that the effect of mixing water absorption by LWA with different moisture states was reflected in the fresh concrete as the loss of mixture workability, while in the hardened concrete as the increase of its strength. With the use of oven-dried LWA, the effect of reduction of water-cement ratio was more significant, and thus the microstructure of the ITZ was more compact.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.275-280
• /
• 2012

Poly(amic acid)s were successfully synthesized from 1,4-bis(4-aminophenoxy)benzene (1,4-APB) or 2,2-bis[4-(4-aminophenoxy)phenyl]hexafluoropropane (HFBAPP) with pyromellitic dianhydride (PMDA), 3,3'-4,4'-benzopenonetetracarboxylic dianhydride (BPDA) and $p$-phenylenediamine ($p$-PDA) and then they were effectively converted into polyimide films by thermal imidization. The chemical structure and thermo-mechanical properties of polyimide films were examined using Fourier transform infrared spectroscopy (FTIR), thermo-gravimetric analyzer (TGA), thermo-mechanical analyzer, dynamic mechanical analyzer (DMA) and universal tensile machine (UTM). The moisture absorption, thermal and mechanical properties of polyimide films decreased with increasing the amount of 1,4-APB and HFBAPP. The polyimide films using HFBAPP showed lower properties than that of 1,4-APB at the same ratio, but it displayed better thermal properties and lower moisture absorption at the similar coefficient of thermal expansion (CTE) with a copper. On the basis of our finding, it is concluded that 4-component polyimide films could be utilized for base films for flexible copper clad laminates (FCCL) of flexible printed circuit boards.

• Korean journal of food and cookery science
• /
• v.24 no.4
• /
• pp.511-516
• /
• 2008

In this study, composite flour and dough were prepared with concentrated sweet pumpkin powder(CSPP) at varying concentrations of 3, 6, 9, 12, and 15%. The samples and a control were then compared with regards to quality characteristics, including moisture, protein, and ash contents, farinogram characteristics, amylogram characteristics, and falling number of flour and extensogram characteristics of dough, in an effort to determine the optimal ratio of CSPP in the formulation. As the CSPP content increased, the moisture and protein contents of the flour increased, whereas the ash contents decreased. With regard to the farinogram characteristics of flour, water absorption, development time, and stability decreased with increasing CSPP content, while weakness increased. The control group evidenced a significantly higher beginning temperature of gelatinization as compared to the CSPP samples. The temperature of maximum viscosity, maximum viscosity, and falling number of flour decreased with increasing CSPP content. With regard to the extensogram characteristics of dough, extensibility decreased with increasing testing time and CSPP content, whereas resistance, maximum resistance, and R/E ratio increased. In conclusion, these results show that $6{\sim}9%$ CSPP may prove very useful as a substitute for wheat flour in the production of hardroll bread, and may provide good nutritional and functional properties.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.359-369
• /
• 2011

The study was carried out to investigate the quality characteristics of pellets manufactured with adding soybean oil, waste soybean oil, ozonized soybean oil and ozonized waste soybean oil to Larix kaemferi Carr sawdust. The characteristics of pellet included moisture contents, heating value, ash contents, apparent densities, durabilities, absorption ratio and elementary analysis. Moisture contents were shown 7.66~9.48% which satisfied the first grade (less than 10%) of quality standard of wood pellets announced by Korea Forest Research Institute. The heating value of the manufactured wood pellets in this study exceeded the first grade of quality standard (more than 4,300 kcal/kg) and it appeared that the pellets manufactured with adding oils and ozonized oils had more heating value than the control pellets. Ash contents 0.34~0.42% also passed the first grade (less than 0.7%) of quality standard and apparent densities were adequate for the first grade (640 kg/$m^3$) on the quality standard. Durabilities of the pellets manufactured with adding soybean oil and ozonized waste soybean oil were shown over the first grade (97.5 kg/$m^3$) of quality standard. In the general results of durabilities, the pellets manufactured with additives had better values than the control pellets. After 24 hours absorption ratio experiment, absorption ratio of pellets manufactured with additives also appeared much lower moisture absorption than the control pellets and they still had the same results after 5days absorption ratio experiment. Elementary analysis of the sulfur content was satisfied the first grade (less than 0.05%) of quality standard of wood pellets and the nitrogen content was also adequate for the first grade (less than 0.3%) of quality standard of wood pellets.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.21 no.2
• /
• pp.81-103
• /
• 1979

The weathered granite soil involves problems in its stability in soil structures depending upon the reduction of soil strength due to the water absorption, crushability, and content of colored mineral and feldspar. As an attemt to solve the problems associated with soil stability, the crushability of weathered granite soil was investigated by conducting tests such as compaction test, CBR test, unconfined compression test, direct shear test, triaxial compression test, and permeability test on the five soil samples different in weathering and mineral compositions. The experimental results are summarized as follows: The ratio of increasing dry density in the weathered granite soil was high as the compaction energy was low, while it was low as the compaction energy was increased. The unconfined compressive strength. and CBR value were highest in the dry side rather than in the soil with the optimum moisture content, when the soil was compacted by adjusting water content. However, the unconfined compressive strength of smples, which were compacted and oven dried, were highest in the wet side rather than in soil with the optimum moisture content. As the soil becomes coarse grain, the ratio of specific surface area increased due to increased crushability, and the increasing ratio of the specific surface area decreased as the compaction energy was increased. The highest ratio of grain crushability was attained in the wet side rather than in the soil with the optimum moisture content. Such tendency was transforming to the dry side as the compaction energy was increased. The effect of water on the grain crushability of soil was high in the coarse grained soil. The specific surface area of WK soil sample, when compacted under the condition of air dried and under the optimum moisture content, was constant regardless of the compaction energy. When the weathered granite soil and river sand with the same grain size were compacted with low compaction energy, the weathered granite soil with crushability had higher dry density than river sand. However, when the compaction energy reached to certain point over limitation, the river sand had higher dry density than the weathered granite soil. The coefficient of permeability was lowest in the wet side rather than in the optimum moisture content, when the soil was compacted by adjusting soil water content. The reduction of permeability of soil due to the compaction was more apparent in the weathered granite soil than in the river sand. The highly significant correlation coefficient was obtained between the amount of particle breakage and dry density of the compacted soil.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.288-295
• /
• 1999

Nineteen japonica and Tongil-type rices were selected from seventy nine Korean and Japanese rice cultivars grown in 1989 based on the water uptake behavior of milled rice under the room temperature and boiling conditions. The selected rice cultivars were investigated for water absorbability and some physicochemical characteristics of milled rice, proper water amount for cooking and sensory evaluation of cooked rice. The relationships among the tested grain properties were also examined. The highest varietal variation of water uptake rate was observed at twenty minutes after soaking in water. The maximum water uptake of milled rices at room temperature occurred mostly at about eighty minutes after soaking in water. Newly harvested rices showed a significantly lower water uptake rate of milled rice at 20 minutes after soaking, a relatively higher maximum water absorption ratio under the room temperature, and the less water uptake and volume expansion of boiled rice compared with the one-year old rice samples. The water uptake rate and the maximum water absorption ratio showed significantly negative correlations with the K/Mg ratio and alkali digestion value(ADV) of milled rice. The rice materials showing the higher amount of hot water absorption exhibited the larger volume expansion of cooked rice. The harder rices with lower moisture content revealed the higher rate of water uptake at twenty minutes after soaking and the higher ratio of maximum water uptake under the room temperature condition. These water uptake characteristics were not associated with the protein and amylose contents of milled rice ansd the palatability of cooked rice. The water/rice ratio(in w/w basis) for optimum cooking was averaged to 1.52 in dry milled rices (12% wet basis) with varietal range from 1.45 to 1.61 and the expansion ratio of milled rice after proper boiling was averaged to 2.63(in v/v basis). The water amount needed for optimum cooking was the lowest in Cheongcheongbyeo (Tongil-type rice) and the highest in Jinbubyeo, and the amount could be estimated with about 70% fittness by the multiple regression formula based on some water uptake characteristics, ADV and amylose content of milled rice as the independent variables. Nineteen rice cultivars were classified into seven groups based on scatter diagram projected by principal component analysis using eight properties related to water uptake and gelatinization of milled rice.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.31-33
• /
• 2008

The study related that Red Phosphorus is surface coated by Al(OH)$_3$ using the proportion 1:1, 1:3, 1:5 respectively, and then take the coated red phosphorus as the core material, at the same time, use Melamine-Formaldehyde resin as the capsule materials for microcapsule processing. According to the TG analysis, the coated red phosphorus with the proportion 1:3 has the tiptop temperature of thermal decomposition, it reaches 376.20^{\circ}C$$. The same to the ratio of burning incomplete carbon it reaches 26.5%. The lowest moisture absorption ratio of the red phosphorus that used coated red phosphorus for microcapsule processing can reach 0.5% with the condition that thermal decomposition temperature decline 3.6%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.229-229
• /
• 2007

In this study, HEMA-based hydrophilic copolymers were synthesized and dielectric constant (K) of the polymer thin films were investigated by change hydroxyl group (-OH) ratio in the polymer chain. The different hydroxyl group ratios were characterized by FT-IR and its thin films were obtained by spin coating. As a result, due to the moisture absorption of the hydrophilic thin film, the dielectric constant has been increased as was expected. The highest dielectric constant (K=4.19, @1MHz) was observed at 40% hydroxyl group ratio among the several polymers.

• Korean journal of food and cookery science
• /
• v.24 no.6
• /
• pp.757-762
• /
• 2008

In this study, korean wheat composite flour and dough were prepared with 1.5, 3.0, 4.5, and 6% Nelumbo nucifera G. tea powder(NNTP). The samples and a control were then compared qualitatively in terms of moisture, protein, ash, and wet gluten content. The farinogram, amylogram, and extensogram characteristics of the dough were also examined, in order to determine the optimal ratio of NNTP for the formulation. According to our results, the moisture content of the flour decreased with increasing NSPP content, whereas its protein and ash content, resistance, and R/E ratio at 135 min of extensogram increased. The NNTP samples had a significantly higher water absorption and weakness of farinogram and maximum resistance at 45, 90, and 135 min. Additionally, samples had an R/E ratio at 45 min of extensogram, 90 min less than the control group. However, stability of the farinogram, temperature of maximum and maximum viscosity of the amylogram, and extensibility of the extensogram showed the reverse effect. The control and NNTP samples showed significant differences in gelatinization beginning temperature of the amylogram, while development time of the farinogram was not significantly different. With regard to the extensogram characteristics of the dough, the area of the control and 1.5% NNTP increased with increasing testing time, whereas at 3.0, 4.5 and 6.0% NNTP, extensibility, and resistance, maximum resistance, and R/E ratio of control and NNTP samples decreased. An area of 3.0, 4.5 and 6.0% NNTP and extensibility of 1.5% NNTP were not significantly different among the testing times. In conclusion, these results show that 1.5% NNTP may prove very useful as a substitute for korean wheat flour where the production of korean wheat white bread is concerned. It may also provide good nutritional and functional properties.