• Smart Structures and Systems
• /
• 제6권9호
• /
• pp.1007-1023
• /
• 2010

This paper describes the development and evaluation of an innovative TDR distributed moisture sensor. This sensor features advantages of being responsive to the spatial variations of the soil moisture content. The geometry design of the sensor makes it rugged for field installation. Good linear calibration is obtained between the sensor measured dielectric constant and soil physical properties. Simulations by the finite element method (FEM) are conducted to assist the design of this sensor and to determine the effective sampling range. Compared with conventional types of moisture sensor, which only makes point measurement, this sensor possesses distributed moisture sensing capability. This new sensor is not only easy to install, but also measures moisture distribution with much lower cost. This new sensor holds promise to significantly improve the current field instruments. It will be a useful tool to help study the influence of a variety of moisture-related phenomena on infrastructure performance.

• 한국인터넷방송통신학회논문지
• /
• 제12권1호
• /
• pp.239-243
• /
• 2012

본 논문에서는 전기 저항식 수분 측정 방식을 선택한 토양수분센서를 제안하였다. 이 방식은 토양내의 수분량에 따라 저항의 변화가 생기는 것을 전기적인 신호로 변환하여 토양수분량과의 관계를 비교하여 수분량을 측정하는 방식으로 방법이 간단하며 저렴한 비용으로 간단하게 장치를 구현하였으며, 시리얼통신을 이용하여 여러 개의 센서를 하나의 네트워크에 묶어 사용하였다. 이 센서 네트워크를 사용하여 IMS(Internet Management System)에 적용하였으며, 센서 네트워크가 웹에서도 잘 작동함을 보였다.

• Journal of Biosystems Engineering
• /
• 제13권3호
• /
• pp.52-58
• /
• 1988

This study was conducted to develop a grain moisture content measurement sensor for automatic control of rough rice drying by natural air. For the above objective, the electrod type sensor was designed and tested. The sensor was able to produce electrical resistance which changes with moisture content of grain. An A/D converter and a micro-computer wed for processing measurement data of sensor. The developed sensor satisfied most design requirements and the results of statistical analysis show that there it no difference between the measurement method of sensor developed and of the dry-oven. Using the developed sensor and measurement system, we are able to measure moisture content of rough rice automatically in drying by natural air.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.516-519
• /
• 2010

본 논문에서는 기존에 관리자가 화초가 자라는 토양에 함유된 수분의 양을 측정하여 물 공급시기를 판단하고, 그에 따라 필요시 수동으로 물을 공급해 주던 방식의 문제점을 개선하고자 제안하는 방법이다. 제안하는 시스템은 센서노드와 관리용 호스트 컴퓨터가 무선센서 네트워크로 연결된다. 계측시스템은 센서노드에 연결된 습도센서를 사용해서 흙속에 존재하는 수분의 양을 측정한다. 제어시스템은 수분의 양이 설정 값 이하로 떨어지면 솔레노이드 스위치를 제어해서 물 공급 시스템의 밸브를 자동으로 열어 일정한 수분이 공급되게 한다.

• Journal of Biosystems Engineering
• /
• 제34권1호
• /
• pp.15-20
• /
• 2009

This study was conducted to develop a moisture sensor for rapeseed, a bio-diesel material. A typical rapeseed, SUNMANG, was used as a raw material. The rapeseed moisture content sensor consists of three components, such as upper and bottom electrodes, a test material dish, and a fixing housing. To evaluate the performance, a data acquisition system was equipped with the rapeseed moisture sensor, computer, printer, and main board. The findings of this study were: 1) the rapeseed moisture content was inversely proportional to electric resistance, and 2) values of electric resistance were recorded in a range of $10{\sim}100\;M{\Omega}$, depending upon a change of the moisture content. The determination of coefficient ($R^2$) and standard error between rapeseed moisture content and electric resistance were 0.9921 and ${\pm}0.289$, which indicated a highly correlative relationship. The response of rapeseed moisture sensor to temperature change was also observed for further performance test. Satisfying results were obtained, such as the determination of coefficient ($R^2$) of 0.9918, predicted standard error of ${\pm}0.373%$, deviation of 0.103%, measurement error of $0.14{\sim}0.48%$, standard deviation of $0.01{\sim}0.22%$, and measurement time of 28.3 s per point, respectively.

• 한국토양비료학회지
• /
• 제31권2호
• /
• pp.85-94
• /
• 1998

물의 높은 유전율을 이용하여 토양 수분함량을 검정하고저 피복 절연 철봉을 토양에 박아 두 극으로 하는 토양 매질 콘덴서에 RC발진회로를 적용하여 주기를 조사하거나 또는 10 mega Herz Pulse 투여시 최대 저장(貯藏) 전압을 검정하는 방식으로 수분 변화에 따른 토양의 유전율을 조사하였다. 주기식 쎈서에선 토양 콘덴서의 용량이 영점 조정후 표준 콘덴서에 비교된 백분율로 출력되었는데 쎈서봉을 물에 담근 깊이와 선형적 관계에 있었다. 여러 개의 쎈서를 가까운 거리에 설치하면 쎈서봉이 안테나 역할을 하여 RC 발진에 교란이 있었으며 변온에 따른 출력 보정 함수를 제시했다. 토양 수분 함량과 출력사이에 높은 상관성이 있으나 쎈서 붕이 설치된 깊이 및 방향에 따라 출력반응이 변화하므로 사용자가 설치후 출력을 토양수분으로 변환하는 함수를 구하여야 한다. 전압식 쎈서에선 출력이 토양수분 함량과 역함수적 관계에 있어 토양 수분 정밀 계측용으론 적합치 않으나 구성 부품이 적고 노화가 느리어 토양 수분의 간이 검정에 적합하고 출력 전압에 따라 relay를 개폐하되 개폐 전압을 사용자가 설정할 수 있는 회로를 첨부하여 수위 조절 또는 토양수분에 따른 관개 line개폐에 활용한 결과 재현성이 우수하였다.

• Structural Monitoring and Maintenance
• /
• 제10권2호
• /
• pp.155-174
• /
• 2023

High performance concrete (HPC) has been extensively used in thin overlay for repair purpose due to its excellent strength and durability. This paper presents an experiment, where the sensor-instrumented HPC overlays have been followed by dynamic strain and moisture content monitoring for 1 year, under normal traffic. The vibrating wire and soil moisture sensors were embedded in overlay before construction. Four given HPC mixes (2 original mixes and their shrinkage-modified mixes) were used for overlays to contrast the strain and moisture results. A calibration method to accurately measure the moisture content for a given concrete mixture using soil moisture sensor was established. The monitoring results indicated that the modified mixes performed much better than the original mixes in shrinkage cracking control. Weather condition and concrete maturity at early age greatly affected the strain in concrete. The strain in HPC overlay was primarily in longitudinal direction, leading to transverse cracks. Additionally, the most moisture loss in concrete occurred at early age. Its rate was very dependent on weather. After one year, cracking survey was carried out by vision to verify the strain direction and no cracks observed in shrinkage modified mixes.

• Journal of Biosystems Engineering
• /
• 제18권3호
• /
• pp.252-261
• /
• 1993

Nuclear magnetic resonance(NMR) was used to study a feasibility test for the possibility to develop a moisture sensor applicable for agricultural products such as raw and powdered grain. Samples of wheat flour and brown rice were tested with a 200MHz hydrogen NMR. The samples were loaded into 5mm NMR glass tubes and $30^{\circ}$ pulses were supplied to get resonance signals. Hydrogen spectrum intensities of the samples were compared to moisture content measured by a drying oven method. High linear correlations were obtained between the hydrogen spectrum intensity and moisture content. Therefore, moisure contents of agricultural products could be measured nondestructively utilizing the NMR principle. A low-cost design concept of the moisture sensor with the NMR principle was proposed for a practical use.

• 센서학회지
• /
• 제30권6호
• /
• pp.415-419
• /
• 2021

We developed a highly accurate, yet inexpensive, refractive index (RI)-based soil moisture sensor. To detect the RI, a light guide was set with a light-emitting diode and photodiode. When the air fills the space between the soil particles, most of the incident light is reflected at the interface between the waveguide and the air because of the large RI difference. As the moisture of the soil increases, the macroscopic soil RI increases. This allows incident light to pass through the interface. The intensity of the light reaching the photodiode was simulated according to the change in the soil RI. Using the simulation results, we designed and manufactured a curved glass waveguide. We evaluated the performance of the RI-based soil sensor by comparing it with a commercially available, high-cost and high-performance time-domain reflectometer (TDR). Our sensor was 96% accurate, surpassing the costly TDR sensor.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2015년도 춘계 종합학술대회 논문집
• /
• pp.5-6
• /
• 2015

A GNSS based measurement system was constructed with not only the core sensors of a GNSS receiver, a TRS sensor and a soil moisture sensor but supplementary installation of power supply and radio communication for monitoring steep slope sites. The sensor combination extracts and transfers not only ground displacement in real-time but soil moisture content.