• 한국가축번식학회지
• /
• 제12권2호
• /
• pp.112-119
• /
• 1988

These studies were conducted to investigate the effects of culture temperature and time on the in vitro maturation and semen type and media on the in vitro fertilization of bovine follicular oocytes, and to asses in vitro fertilization rate of oocytes cultured by extraffollicular method following fertilization in vitro, or transfer into the pseudopregnant rabbit oviduct or uterus. The bovine oocytes recovered from follicles were cultrued for 18 hrs or 72hrs at 38$^{\circ}C$ with 5% CO2 in moist air. Flesh-diluted(2 folds) and frozen-thawed semen in 0.5ml straw from a fertile bull were used. In order to obtain capacitation of spermatozoa were treated with bovine follicular fluids(BFF) and Inophore A(IA). The results obtained were summarized as follows: 1. The oocytes were classified as "A, B, C, D and Degenerative" depending morphological integrity and those were 62.0%, 12.0%, 17.2%, 5.9% and 3.0% of the total oocytes harvested, respectively. 2. The oocytes matured to metaphase II were significantly increased between 24-48hrs of incubation and at 37-39$^{\circ}C$ with 5% CO2 in moist air. 3. The in vitro fertilization rate following transferred into rabbit oviduct or uterus with bull semen and in vitro matured oocytes were higher ligation than non-ligation of oviduct or uterus. 4. The in vitro fertilization rate of oocytes matured in vitro were higher neat than frozen semen and treatment of IA than BFF on the capacitation of spermatozoa. 5. The effects of semen types and media on in vitro fertilization of oocytes matured in vitro were higher fertilization rate of neat than friozen semen, and media was not significant.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1311-1319
• /
• 1990

본 연구에서는 작동유체로서 습증기와 거동이 유사한 습증기를 대기흡입식 간 헐 초음속 풍동을 이용하여, 팽창율이 일정한 노즐을 통하여 팽창시키는 경우에 대하 여 비평형 응축영역내 입치하는 경우에 대하여, 정체점 상태량의 변화에 기인되는 응 축 및 응축형격파가 경사형격파의 형상과 변화에 미치는 영향을 다음의 관점으로부터 연구하였다.

• 한국지반환경공학회 논문집
• /
• 제15권5호
• /
• pp.57-65
• /
• 2014

경제적, 기술적인 이유에서 실내시험을 위한 in situ 상태 그대로의 현장 모래 시료를 채취하는 것은 매우 어렵다. 따라서 현장과 유사한 상태의 시료 조성을 위한 다양한 시료 재성형 방법이 제시되었으며, 연구 목적에 따라 적합하다고 판단되는 시료성형방법이 다양하게 적용되고 있다. 본 논문에서는 모래의 시료 재성형 시 널리 이용되고 있는 습윤다짐법, 건조낙사법, 그리고 건조퇴적법을 적용하여 동일한 상대밀도로 시료를 조성한 후, 일정한 구속압 조건에서 압밀배수전단 시험을 수행하였다. 또한 자체제작을 통해 시료의 상 하부 캡에 압전소자를 설치하여 압밀 종료 시점과 전단과정에서의 탄성파 속도를 측정함으로써 시료 재성형 방법 및 상대밀도에 따른 오타와 모래에서의 거동 특성 및 전단거동 시의 탄성파 속도의 변화 경향을 분석하였다. 분석 결과, 시료 조성방법에 따라 전단과정에서 모래의 거동에는 차이가 발생할 수 있는 것으로 나타났으며, 전단과정 시 전단파 속도는 체적 변화양상과 동일한 경향을 보이는 것으로 나타났다.

• 동력기계공학회지
• /
• 제21권4호
• /
• pp.62-69
• /
• 2017

Because the moist foods like anchovy were appeared lower quality by hot air that occurred the lipid oxidation, the drying system by using the cold air has been used widely. This study has been carried out on the performance improvement according to arrangement angle of baffle and location of air duct in the cold air dryer. The main parameters in this study are the arrangement angles which are without, $0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$ and $40^{\circ}$, and the locations of air duct are without, front, center and back. For this study we have conducted the numerical analysis method using fluent in order to obtain the optimal condition of the drying performance. As the arrangement angle of baffle is increased, the relative humidity is proportionally decreased, the value at $40^{\circ}$ is 42.2% that indicate the reduction of about 4% than without it. After the air duct was installed, the decreased relative humidity is showed within 1%, therefore, the effect of air duct for improving the dry capacity is more large than the arrangement angle of baffle. Finally, we have obtained the optimal conditions that the arrangement angle is $40^{\circ}$ with the air duct for a cold air dryer.

• 설비공학논문집
• /
• 제18권9호
• /
• pp.714-721
• /
• 2006

In evaporative cooling applications, the evaporation water is supplied usually sufficiently larger than the amount evaporated to enlarge contact surface between the water and the air. Especially in indirect evaporative coolers, however, if the evaporation water flow rate is excessively large, the evaporative cooling effect is not used for heat absorption from the hot fluid but spent to the sensible cooling of the evaporation water itself. This would result in a decrease in the cooling performance of the indirect evaporative cooler. In this study, the effects of the evaporation water flow rate on the cooling performance are investigated theoretically. The cooling process in an indirect evaporative cooler is modeled into a set of linear differential equations and solved to obtain the exact solutions to the temperatures of the hot fluid, the moist air, and the evaporation water. Based on the exact solutions, it is analyzed how much the cooling performance is affected by the evaporation water flow rate. The results show that the decrease in the cooling effectiveness is substantial even for a small flow rate of the evaporation water and the relative decrease is more serious for a high-performance evaporative cooler.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권5호
• /
• pp.687-694
• /
• 1999

This study was conducted to develop new drying process for automatic control and marine engi-neering system. Air-water tests were carried out to investigate dryer performance. The dispersed flow in he dryer test apparatuses was also simulated by using a numerical code which solves the Dittus-Boelter equation for continuous liquid phase and the Reynolds equation of droplet motion for continuous liquid phase and the Reynolds equation of droplet motion for dispersed phase to predict droplet removal efficiency. Proper conditions for dehumidification were optimized by response ambient conditions. When the selected indexes were constrained in the range of 85-98% moisture content above $15^{\circ}$ and more than mass flow rates of moist air 750kg/h. The numerical results were compared with the experimental data pertaining to the removal effi-ciency at chamber stage and overall pressure drop along concentric tubes Good agreement was obtained as for the efficiency while relatively poor agreement was obtained for the relative humidity. The results also showed that the efficiency depended strongly on the relative humidity at the inlet condition which indicated the importance of estimating the heat exchanger length. Effects of some design parameters in both removal efficiency and breakthrough onset condition are discussed.

• 한국대기환경학회지
• /
• 제18권6호
• /
• pp.503-514
• /
• 2002

During the past two decades, primary pollutants in the ambient air have been substantially reduced in Korea by aggressive government efforts such as the switchover to clean fuels and equipment of automobiles with a three-way catalytic converter. However, visibility impairment in Seoul and major metropolitan areas has been a stubborn problem. It is apparent that both directly emitted fine particles mainly from vehicles and secondary fine particles from photochemical reactions could contribute to this visibility impairment. In addition, Korea is located downwind of the prevailing westerlies from China and is influenced by the emissions of air pollutants in China. In order to assess this complicated problem of visibility impairment, the visibility trends for the past 17 years observed at more than 60 stations throughout the country were analyzed. The results showed that visibilities were generally the lowest in the winter morning in comparison with those in the summer afternoon as well as the annual average values. It was believed that primary pollution was principally responsible for visibility impairment in most areas. The visibility in the summer afternoon was lower in clean coastal areas along with a high level of relative humidity due to the inflow of moist air accompanied by sea breeze. Although contributions of secondary particles from photochemical reactions and long-range transport of fine particles to the visibility impairment were probable, their certain evidences were not found.

• 한국환경과학회지
• /
• 제25권3호
• /
• pp.405-415
• /
• 2016

We analyzed the micro-meteorological characteristics during typical steam fog over the Gumi Reservoir of Nakdong river with the field observation data for recent 2 year(1 April 2013~31 March 2015) collected by the national institute of meteorological research, KMA. Steam fog occur when the cold drainage flows over the warm water surface. As the sensible and latent heat from water are provided to the air, the instability of lower atmosphere is increased. The resultant vertical mixing of warm, moist air near water surface and cold air aloft causes the formation of status cloud. The convection strengthened by radiative cooling of the upper part of the stratus causes the fog to propagate downward. Also, the temperature at the lowest atmosphere is increased rapidly and the inversion near surface disappear by these processes when the fog forms. The increase of wind speed is observed because the downward transportation of momentum is caused by vertical mixing.

• 한국환경과학회지
• /
• 제25권1호
• /
• pp.163-171
• /
• 2016

We analyzed the characteristics of fog formation in the Gumi Reservoir of Nakdong river with the field observation data for recent 2 years (1 April 2013~31 March 2015) collected by the national institute of meteorological research, KMA. In early morning, we frequently observe the steam rising from the water surface. The fog occurs from adding water vapor into the air. We call the fog as steam fog. Steam fogs occur when cold, dry air mixes with warm, moist air above a water surface. The steam fog appears mainly in autumn under the following conditions; (1) sensible heat is positive values ($10{\sim}20W/m^2$), (2) latent heat is more positive values ($25{\sim}35W/m^2$) than sensible heat, (3) cloudless nights with light winds (about 1.5 m/s), (4) under condition(3), mountainous winds easily blows into the reservoir.

• 한국지구과학회지
• /
• 제30권5호
• /
• pp.529-549
• /
• 2009

In 2007, just after the recession of the Changma, anomalously long rainy period (from July 30 to August 15) occurred in Korea. To identify the cause of the sustained rainy period, we performed synoptic analysis and the associated air motions. The behavior of each air parcel trajectory associated with atmospheric motion was then investigated. As a result, three particular phenomena occurring at latitudes lower than $40^{\circ}N$ were discovered. First, a mass of relatively cold air, referred to as E, made a deep intrusion from $20^{\circ}N$ to $60^{\circ}N$. Second, this intrusion was accompanied by another mass of air called dE. It was colder and drier than E and originated from the mid-troposphere over the tropical ocean. Third, dE and E rotated clockwise three times over a period of 17 days over the Northwestern Pacific and blocked the westerly waves imbedded in the zonal flow from propagating. Two additional phenomena were observed at latitudes higher than $40^{\circ}N$. First, the cold core system, while approaching from the west with low geopotential values at its center, was stagnated over Shanxi China. It enhanced the northward intrusion of dE and E, and then diminished. The subsequent low system showed similar evolution as the first one. Second, a warm core anticyclone was formed over Lake Baikal, blocking the westerlies for 13 days and contributed to the persistent northward incursion of warm moist air. Moreover, a horizontally extended intrusion of upper level clouds from the tropics to $50^{\circ}N$, which may be interpreted as a tropical plume, was found around the end of the period (from August 12 to 15, 2007) with successive tropical nights over Korea.