• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.170-175
• /
• 1999

Noncontact measuring methodology of 3-dimensional profile using CCD camera are very attractive because of it's high measuring speed and its's high sensitivity. Especially, when projecting a grid pattern over the object the captured image have 3 dimensional information of the object. Projection moire extract 3-D information with another grid pattern in front of CCD camera. However phase measuring profilometry(PMP) obtain similar results without additional grid pattern. In this paper, new method for grid pattern generation system by polygonal mirror and Laser Diode. This system is applied the projection moire and the PMP.

• 사상체질의학회지
• /
• 제10권1호
• /
• pp.161-170
• /
• 1998

1. 연구목적 : 외형적 특징을 통한 사상체질진단을 연구하기 위한 목적이다. 특별히 상안부에서 모아레 영상을 이용한 형태학적 차이를 찾고자 하였다. 2. 방법 : 1996년 4월부터 1997년 2월까지 경희의료원 부속한방병원 왜래환자 및 직원을 대상으로 설문지 및 임상적치료 경과를 통하여 체질적 경향성이 뚜렷한 대상자를 선별하였다. 이들을 동일촬영 조건을 통하여 얻은 얼굴 사진중 형태특이자를 제외한 113례의 모아레 사진을 분석하여 50항목을 측정하고 70항목의 공식을 제작하여 체질별 상이점을 도출하였다. 3. 결과 : 상안부 모아레 영상을 분석하여 체질에 따른 특징은 따로 도표로 제시한다. 4. 결론 : 소양인은 태음인 혹은 소음인에 비하여 좌측상안의 일부가 전방으로 돌출되었고, 태음인은 좌우측 상안의 비교에서 우측상안의 일부부위에서 소음인 혹은 소양인에 비하여 전방으로 돌출되었다. 모아레 영상을 이용하여 체질에 따른 상안부의 형태학적인 특징을 도출하였다.

• 한국생산제조학회지
• /
• 제6권3호
• /
• pp.52-57
• /
• 1997

Electronic Speckle Pattern Interferometry(ESPI) using the Model 95 Ar. laser, a video system and an image processor was applied to the in-plane displacement measurements. Unlike traditional strain gauges or Moire method, ESPI method requires no special surface preparation or attachments and can be measured in-plane displacement with no special surface preparation or attachments and can be measured in-plane displacement with no contact and real time. In this experiment specimen was loaded in parallel with a loadcell. The specimen was the cold rolled steel sheet of 2mm thickness, which was attached strain gauges. The study provides an example of how ESPI have been used to measure strain displacement in this specimen. The results measured by ESPI compare with the data which was measured by strain gauge method in tensile testing.

• 한국산학기술학회논문지
• /
• 제12권6호
• /
• pp.2457-2462
• /
• 2011

생산방식의 변화에 따라 3차원 형상을 신속하고 정확하게 측정하는 것이 중요해졌다. 가장 훌륭한 비접촉 3차원 측정방법인 모아레 방법 중 잡음신호를 효과적으로 제거할 수 있는 위상천이 방법을 구현함에 있어 DMD를 이용하여 격자를 생성하고 이송하는 효과를 발생하도록 하였다. 컴퓨터에서 격자를 이송하고 위상천이를 발생하므로 기계적 이송으로 인한 잡음신호의 발생 가능성을 배제할 수 있으며 광학렌즈와의 적절한 조합을 통해 쉽게 분해능을 변화하며 3차원 정보 획득이 가능하다. 근본적인 $2\pi$ 모호성문제를 극복하기 위하여 2차원 위상정력을 실시하였다. 이 방법을 적용하여 3차원 형상의 측정을 수행하였다.

• 방송공학회논문지
• /
• 제17권2호
• /
• pp.316-324
• /
• 2012

본 논문에서는 영상의 그래디언트의 히스토그램 (HOG)에 기반한 적응적 평활화 필터를 이용하여 스캔된 하프톤 문서의 하프톤 잡음 제거 방법을 제안한다. 하프톤 잡음은 잡음의 편차가 커서 에지 영역과 유사한 특성을 나타내므로 일반적인 에지 보존 평활화 필터를 적용할 경우에는 잡음 제거 효과가 떨어진다. 또한 인쇄물에 주로 사용되는 집중형 도트 방식의 하프톤은 컬러 영상에서 채널간의 간섭 현상으로 인해 모아레 패턴을 생성한다. 따라서 본 논문에서는 스캔된 하프톤 문서의 하프톤 잡음과 모아레 패턴을 효과적으로 제거하기 위해 하프톤 잡음의 방향성에 기반한 적응적 평활화 필터 방법을 제안한다. 하프톤 잡음의 경우 영상의 에지와 달리 등방성을 가지므로 영상을 블록 단위로 나누어 지배적인 에지의 크기와 방향성을 살핌으로써 적응적 평활화 필터를 구성할 수 있다. 실험 결과, 제안하는 방법은 다양한 인쇄 매체를 통해 생성된 하프톤 문서에 대하여 효과적으로 하프톤 잡음을 제거하면서도 영상의 에지를 보존하는 것을 확인할 수 있었다.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.169-179
• /
• 1998

Plane mirror type laser interferometers are popularly being used in many modern ultraprecision machines, as they can perform simultaneous measurements of multiple axis positions with nanometer resolution capabilities. One important issue in this application of laser interferometers is to provide a good level of alignment between the reflecting mirrors and the laser beams so that measurement errors due to undesirable coupling effects can be avoided in multiple axis measurements In this investigation, a thorough metrological analysis is given to develop an suitable mathematical model for a precision x-y stage in which the orthogonality misalignment between the reflecting mirrors significantly affects overall x-y mea-surement results. Then a noble calibration method is suggested in which two-dimensional displacement sensors of moire gratings of concentric circles are used to realize the reversal principle of orthogonality evaluation in situ. Finally, actual experimental results are discussed to verify that the suggested method can effectively calibrate the orthogonality error with an uncertainty of 0.2667 arcsec.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1987년도 춘계학술발표회 논문집
• /
• pp.188-190
• /
• 1987

In this paper the real-time analysis of vibration objects using projection moir\ulcorner method is realized. By measuring the vibration of two different speakers using three grationgs with different pitch. it is possible to analyze the vibrating speakers, so the fundamental frequency mode of speakers is obserbed at 550Hz and 105Hz respectively and phase lag is shown nonlinear characteristics. Also it is possible to measure the vibration as to nonperiodic signals as well as peoriodic signals.

• 한국생산제조학회지
• /
• 제9권3호
• /
• pp.103-110
• /
• 2000

Shaft encoder which encodes the rotational angle of a shaft becomes more important recently due to factory automation and office automation. Although an absolute type encoder is more dsirable due to its convenience an incremental encoder is commonly used because of its cost and technical difficulties Fabricating a high resolution absolute encoder is very diff-cult because the physical size is limited by currently available technology. In order to overcome this difficulty Moire fringe can be used incorporated with gray code. In order to measure the position of fringes which move as the code disk rotates a neural network was developed in this paper. Formerly fringe position is usually measured by a sophisticated software which needs a little long calculation time. However using nerual network method can eliminate such calculation time even though it needs learning job The pro-posed method is verified through several experiments.

• 산업경영시스템학회지
• /
• 제17권31호
• /
• pp.155-161
• /
• 1994

This study presents a systematic and mere economical method to acquire 3-D anthropometric data by the use of Moire' interferometry, image processing and computer vision techniques. An experiment was performed to measure sixty-one anthropometric variables, such as height weight neck-base circumference, contained areas of various contours etc.., of thirty-six male subjects with wide range of ages (14 years to 43 years' old). Cluster analysis was performed with contour information, and somatotyping was performed to obtain four distinct types of body shape. The results were then compared with classifications obtained from traditional somatotyping methods which showed 71.88% consistency. This study developed a simple and inexpensive method for 3-D anthropometric data acquisition and suggests the quantification and interpretation scheme that will enable us to utilize the data for industrial applications.

• 한국해양공학회지
• /
• 제13권1호통권31호
• /
• pp.29-38
• /
• 1999

In this paper the forming simulation of circular bulge by using PAM-STAMP has been performed to estimate the sheet metal forning and the plastic deformation characteristic of circular bulge. The uniaxial tension tests adn bulge tests are carried out for studying the forming characteristics of materials, and also Moire experiment are carried out for measuring the radius of curvature of the bulge and the polar compressive thickness strain. In order to compare the simulation results with the experiment and Hills theory, the relationships between redius of curvature adn polar height of the bulge, between hydraulic pressure and polar height, and between polar compressive thickness strain and polar height, are used. According to this study, the results of simulation and Hills theory are good agreement to the experiment. So, the results of simulation by using PAM-STAMP and Hills theory will give engineers good information to assess the formagbility and plastic deformation characteristic of hydraulic circular bulge test.