• 전기학회논문지
• /
• 제62권7호
• /
• pp.994-1002
• /
• 2013

This study suggests a generalized availability and safety evaluation model to evaluate the influences to the system's fault tolerant capabilities depending on automatic fault detection function such as the automatic periodic testings. The conventional evaluation model of automatic fault detection function deals only with the self diagnostics, and supposes that the fault detection coverage of self diagnostics is always constant. But all of the fault detection methods could be degraded. For example, the periodic surveillance test has the potential human errors or test equipment errors, the self diagnostics has the potential degradation of built-in logics, and the automatic periodic testing has the potential degradation of automatic test facilities. The suggested evaluation models have incorporated the loss or erroneous behaviors of the automatic fault detection methods. The availability and the safety of each module of the safety grade platform have been evaluated as they were applied the automatic periodic test methodology and the fault tolerant evaluation models. The availability and safety of the safety grade platform were improved when applied the automatic periodic testing. Especially the fault tolerant capability of the processor module with a weak self-diagnostics and the process parameter input modules were dramatically improved compared to the conventional cases. In addition, as a result of the safety evaluation of the digital reactor protection system, the system safety of the digital parts was improved about 4 times compared to the conventional cases.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.109-119
• /
• 2013

This paper presents the design of the Safety Programmable Logic Controller (SPLC) used in the Nuclear Power Plants, an analysis of a reliability for the SPLC using a markov model. The architecture of the SPLC is designed to have the multiple modular redundancy composed of the Dual Modular Redundancy(DMR) and the Triple Modular Redundancy(TMR). The operating system of the SPLC is designed to have the non-preemptive state based scheduler and the supervisory task managing the sequential scheduling, timing of tasks, diagnostic and security. The data communication of the SPLC is designed to have the deterministic state based protocol, and is designed to satisfy the effective transmission capacity of 20Mbps. Using Markov model, the reliability of SPLC is analyzed, and assessed. To have the reasonable reliability such as the mean time to failure (MTTF) more than 10,000 hours, the failure rate of each SPLC module should be less than $2{\times}10^{-5}$/hour. When the fault coverage factor (FCF) is increased by 0.1, the MTTF is improved by about 4 months, thus to enhance the MTTF effectively, it is needed that the diagnostic ability of each SPLC module should be strengthened. Also as the result of comparison the SPLC and the existing safety grade PLCs, the reliability and MTTF of SPLC is up to 1.6-times and up to 22,000 hours better than the existing PLCs.

• 해양환경안전학회지
• /
• 제26권6호
• /
• pp.723-731
• /
• 2020

해양플랜트는 발주처와 선급에서 요구하는 다양한 항목들을 설계할 시에 반영하여야 한다. 특히, 해양구조물에 탑재되는 Topside Module의 경우 육상플랜트와는 다르게 공간적 제약이 크고 구조물의 움직임과 같은 해상 환경조건 및 안전과 관련된 요구사항들이 많아 그 설계 과정이 매우 까다롭다. 본 연구에서는 Topside Module에 들어가는 주요장비 중 하나인 HPU(Hydraulic Power Unit) 구조물에 작용하는 하중을 DNVGL 규칙에 따라 계산하고, 각 하중조건에 따른 구조안전성 평가를 진행하였고 개발된 제품의 구조 신뢰성을 향상하고자 하였다. 구조해석은 범용프로그램인 MSC 소프트웨어를 사용하였고, 총 5가지 하중 조건으로 구조해석을 진행하여 다양한 움직임에 대한 안전성을 검토하였다. 그 결과 선미 방향 Pitching 상태(Load Case 5)에서 최대 응력이 발생하였고, 응력 수준은 허용응력의 약 85 % 수준이고, 최대변위는 허용치의 약 5 % 수준으로 구조안전성이 확인되었으며 부재 간 간섭은 발생하지 않았다.

• Architectural research
• /
• 제15권3호
• /
• pp.151-158
• /
• 2013

Offshore oil and gas process plants are exposed to hazardous accidents such as explosion and fire, so that the structural components should resist such accidental loads. Given the possibilities of thousands of different scenarios for the occurrence of an accidental hazard, the best way to predict a reasonable size of a specific accidental load would be the employment of a probabilistic approach. Having the fact that a specific procedure for probabilistic accidental hazard analysis has not yet been established especially for explosion and fire hazards, it is widely accepted that engineers usually take simple and conservative figures in assuming uncertainties inherent in the procedure, resulting either in underestimation or more likely in overestimation in the topside structural design for offshore plants. The variation in the results of a probabilistic approach is determined by the assumptions accepted in the procedures of explosion probability computation, explosion analysis, and structural analysis. A design overpressure load for a sample offshore plant is determined according to the proposed probabilistic approach in this study. CFD analysis results using a Flame Acceleration Simulator, FLACS_v9.1, are utilized to create an overpressure hazard curve. Moreover, the negative impulse and frequency contents of a blast wave are considerably influencing structural responses, but those are completely ignored in a widely used triangular form of blast wave. An idealistic blast wave profile deploying both negative and positive pulses is proposed in this study. A topside process module and piperack with blast wall are 3D FE modeled for structural analysis using LS-DYNA. Three different types of blast wave profiles are applied, two of typical triangular forms having different impulse and the proposed load profile. In conclusion, it is found that a typical triangular blast load leads to overestimation in structural design.

• 전기전자학회논문지
• /
• 제3권1호
• /
• pp.101-108
• /
• 1999

본 논문은 금속파편이 발생시 금속파편의 위치를 추정하기위한 위치 추정 알고리즘을 제안한다. 이 추정 알고리즘은 자동화된 알람 구별부와 위치 추정부로 구성된다. 알람 구별부는 충격 신호인지 거짓 충격 신호인지를 구별하는 기능을 수행하며, 위치 추정부는 충격신호로부터 충격신호의 시작점을 찾아내어 위치를 추정한다. 이 알고리즘의 타당성을 검증하기위해 원자로 Mock-up 상에서 실험한 결과 위치 추정값 과 실제 충격값이 약 10 % 이내의 오차율을 보였다.

• 한국태양에너지학회 논문집
• /
• 제36권5호
• /
• pp.19-30
• /
• 2016

In this study, realize voltage regulation $220Vac{\pm}10%$ or less, frequency fluctuation $60Hz{\pm}1%$ or less over the independent operation and grid-connected operation technologies for power stabilization relates to the ESS designed and manufactured in conjunction with solar installations and solar to compensate the output reduction due to the polarization of the solar module through the polarization prevention technology for preventing the optical module efficiency is lowered, in conjunction with the BMS inverter efficiency was more than 92%, more than 90% of the charging efficiency to the target. This study was designed in conjunction with the ESS solar power plants, grid-connected operation and independent operation, Peak-Cut, it can stabilize the grid via the Peak-Shifting operation

• 한국태양에너지학회 논문집
• /
• 제33권5호
• /
• pp.24-33
• /
• 2013

Renewable energy industries, including sola cell plants, has been ever increasing ones for reducing fossil fuel consumption and strengthening national energy policy. In this paper we tried to identify occupational health hazards in solar cell-related industries operated in Korea. Poly silicon, silicon ingot and wafer, solar cell and module are major processes for producing solar cells. Poly silicon operations may cause hazards to workers from metal silicon, silanes, silicon, hydro fluoric acid and nitric acid. Solar cells could not be constructed without using metals such as aluminum and silver, acids such as hydrofluoric acid and nitric acid, bases such as sodium hydroxide and potassium hydroxide, and solvent and phosphorus chloride oxide. Workers in module assembly process may exposed to isopropanol, flux, solders that contain lead, tin and/or copper. To prevent occupational exposure to these hazards, it is essential to identify the hazards in each process and educate workers in industries with proper engineering and administrative control measures.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.295-300
• /
• 1998

In this paper, a real time diagnostic algorithm fur estimating the impact location by loose parts is proposed. It is composed of two modules such as the alarm discrimination module (ADM) and the impact-location estimation module(IEM). ADM decides whether the detected signal that triggers the alarm is the impact signal by loose parts or the noise signal. When the decision from ADM is concluded as the impact signal, the beginning time of burst-type signal, which the impact signal has usually such a form in time domain, provides the necessary data fur IEM. IEM by use of the arrival time method estimates the impact location of loose parts. The overall results of the estimated impact location are displayed on a computer monitor by the graphical mode and numerical data composed of the impact point, and thereby a plant operator can recognize easily the status of the impact event. This algorithm can perform the diagnosis process automatically and hence the operator's burden and the possible operator's error due to lack of expert knowledge of impact signals can be reduced remarkably. In order to validate the application of this method, the test experiment with a mock-up (flat board and reactor) system is performed. The experimental results show the efficiency of this algorithm even under high level noise and potential application to Loose Part Monitoring System (LPMS) for improving diagnosis capability in nuclear power plants.

• 멤브레인
• /
• 제8권4호
• /
• pp.220-227
• /
• 1998

국내 정수장.수도전.간이상수도등 2000여 곳의 수질을 환경부가 검사한 결과, 지역별로 세균.무기 이온등 몇몇 항목에서 환경기준을 초과한 것이 밝혀졌다. 이중에서 문제가 되고 있는 질산성 질소.암모니아성 질소.불소.염소등의 농도를 임의로 조작한 후, 시중에 유통되고 있는 가정용 정수기 모듈로 정수처리시켰을 때의 효과와 지역별로 문제시되는 항목들을 효과적으로 제거하기 위한 적당한 분리막을 선정하고자 측정 검토하였다. 정수처리하여 얻은 투과수를 일정 온도 하에서 보관하고, 일정 시간마다 세균수를 측정하여 세균수와 온도 및 시간과의 관계를 측정 조사함으로써 막 사용을 좀 더 효율적으로 할 수 있게끔 검토하였다.

• 한국안전학회지
• /
• 제17권4호
• /
• pp.110-118
• /
• 2002

During the last ten years, the need has been increase for reducing maintenance cost for aged equipments are ensuring safety, efficiency and profitability of petrochemical and refinery plants. American Petroleum institute(API) developed a code, API 581 for proposing standard procedures of risk based inspection. Even though the API 581 code covers general RBI procedures, there must be some limitations. In this study, a semi-quantitative assessment algorithm for RBI based on the API 581 code was reconstructed for developing an RBI software. The user-friendly realRBI software is developed with a module for evaluation semi-quantitative risk category using the potential consequence factor and the likelihood factor. Also, inspection planning module for inspection time and inspection method for equipments are included.