• 한국산학기술학회논문지
• /
• 제8권2호
• /
• pp.185-188
• /
• 2007

최근 디젤 차량의 NOx와 PM의 동시 저감을 위해 EGR 밸브와 EGR 쿨러로 구성된 modulated EGR 시스템이 디젤엔진에 장착되고 있다. 본 연구에서는 modulated EGR 시스템의 성능 평가를 위한 test bench를 설계, 제작한 후 2.0 L 디젤엔진용 전자식 EGR 밸브를 시험하였다. 또한 전자식 EGR 밸브의 성능을 밸브양정의 거동, 밸브 개폐시의 응답성, 밸브 통과 유량을 통하여 평가하였다. PWM 신호의 듀티율에 따른 밸브 양정의 거동은 비선형적이었으며, 밸브 개방과 폐쇄의 경로가 상이한 히스테리시스 현상을 나타냈다. 밸브 개방시 응답성은 통상의 기준을 만족하여 적절하였다. 끝으로 밸브 통과 유량은 듀티율 $40{\sim}60%$에서 듀티율과 밸브 전후의 차압에 의해 결정되나, 듀티율 60%이상에서는 차압에만 의존하였다.

• 오토저널
• /
• 제8권1호
• /
• pp.29-39
• /
• 1986

The purpose of this study is to develop an exhaust gas recirculation valve for reduction of the NOx emission of the gasoline engine. In this study the back pressure modulated(BPM) EGR system was developed and tested for the 1.6$\ell$ gasoline engine. By this system 50% of NOx emission was reduced at 7% EGR rate. Fuel consumption and CO emission were not affected by EGR but HC was increased up to the level of allowable limit. Overall operation was satisfactory. As a result of this study, the technics for developing EGR valve and adjusting the engine for EGR have been established.

• 한국분무공학회지
• /
• 제18권1호
• /
• pp.21-26
• /
• 2013

Diesel low temperature combustion (LTC) is the concept where fuel is burned at a low temperature oxidation regime so that $NO_x$ and particulate matters (PM) can simultaneously be reduced. There are two ways to realize low temperature combustion in compression ignition engines. One is to supply a large amount of EGR gas combined with advanced fuel injection timing. The other is to use a moderate level of EGR with fuel injection at near TDC which is generally called Modulated kinetics (MK) method. In this study, the effects of fuel injection pressure on performance and emissions of a single cylinder engine were evaluated using the latter approach. The engine test results show that MK operations were successfully achieved over a range of with 950 to 1050 bar in injection pressure with 16% $O_2$ concentration, and $NO_x$ and PM were significantly suppressed at the same time. In addition, with an increase in fuel injection pressure, the levels of smoke, THC and CO were decreased while $NO_x$ emissions were increased. Moreover, as fuel injection timing retarded to TDC, more THC and CO emissions were generated, but smoke and $NO_x$ were decreased.