• 한국해양공학회지
• /
• 제7권2호
• /
• pp.57-67
• /
• 1993

The fracture behavior of plain woven glass/epoxy composite plates with a crack is investigated under static tensile loading. It is shown in this paper that the characteristic length associated with the point stress criterion depends on the crack length. To predict the not ched tensile strength, the point stress criterion proposed by Whitney and Nuismer are modified. An excellent agreement is found between the experimental results and the analytical prediction of the modified point stress criterion. The condition of unstable crack growth in the presence of a per-existing flaw(machined notch) is examined by means of the maximum stress intensity factor $K_max$ using maximumload P$_max$. The values of $K_max$ evaluated from energy release rate G$_max$(the compliance me thod) indicate a wide difference. Therefore in regard to anisotropy and heterogeneity of the composite materials studied, the modified shape correction factor f(a/W) is obtained. $K_max$evaluated by the compliance method a little or insignificantly depends on the initial crack length a, the specimen thickness B, the crack angle .theta. and the specimen geometry.

• 농업과학연구
• /
• 제43권2호
• /
• pp.215-220
• /
• 2016

The global cultivation area of genetically modified crops (GM crops) has been increasing every year. Cultivation of GM crops is not only beneficial to the economy but also has positive effects on the environment in decreasing the use of agrochemicals, chemical fertilizers, and agricultural machinery. However, there have been controversies about the admixture of GM crops and non-GM crops and the unintentional release of GM crops to the environment. Especially in Korea, where consumption of agricultural products is import-dependent, the economic importance of GM crops has been a significant issue. The Act on import and distribution of GM crops was established in 2001 to start the management of GM crops in Korea. Recently, the imported amount of GM crops to Korea has reached over 10 million tons and is increasing very rapidly; consequently, the potential environmental impact of GM crops is becoming a big issue in Korea. In Japan, the discovery of imported GM canola plants around ports in 2005 raised awareness of the unintentional release of GM crops. In Korea, GM maize plants were also found in port and feed factory surroundings from 2005 to 2007. It is now necessary to monitor imported GM crops by tracing distribution, transport process for practical environmental risk assessment. Possible gene transfer from GM crops to non-GM crops should also be investigated in the cultivation area and the surroundings as well.

• Korean Chemical Engineering Research
• /
• 제59권4호
• /
• pp.493-502
• /
• 2021

We prepared and investigated a biosynthesized nanoparticulate system with high adsorption and release capacity of letrozole. Silver nanoparticles (AgNPs) were biosynthesized using olive leaf extract. Cysteine was capped AgNPs to increase the adsorption capacity and suitable interaction between nanoparticles and drug. Morphology and size of nanoparticles were confirmed using transmission electron microscopy (TEM). Nanoparticles were spherical with an average diameter of less than 100 nm. Cysteine capping was successfully confirmed by Fourier transform infrared resonance (FTIR) spectroscopy and elemental analysis (CHN). Also, the factors of letrozole adsorption were optimized and the linear and non-linear forms of isotherms and kinetics were studied. Confirmation of the adsorption data of letrozole by cysteine capped nanoparticles in the Langmuir isotherm model indicated the homogeneous binding site of modified nanoparticles surface. Furthermore, the adsorption rate was kinetically adjusted to the pseudo-second-order model, and a high adsorption rate was observed, indicating that cysteine coated nanoparticles are a promising adsorbent for letrozole delivery. Finally, the kinetic release profile of letrozole loaded modified nanoparticles in simulated gastric and intestinal buffers was studied. Nearly 40% of letrozole was released in simulated gastric fluid with pH 1.2, in 30 min and the rest of it (60%) was released in simulated intestinal fluid with pH 7.4 in 10 h. These results indicate the efficiency of the cysteine capped AgNPs for adsorption and release of drug letrozole for breast cancer therapy.

• 구강회복응용과학지
• /
• 제35권2호
• /
• pp.81-89
• /
• 2019

목적: 이 연구의 목적은 RMGIC에 레진 표면 코팅제를 적용하였을 때 용해도와 불소 유리량 간의 상관관계를 알아보는 것이다. 연구 재료 및 방법: 불소 유리량과 용해도 측정을 위해 표면 코팅제를 도포하지 않은 Fuji II $LC^{(R)}$, $Filtek^{TM}$ Z350XT와 G coat $plus^{TM}$를 도포한 Fuji II $LC^{(R)}$, $Permaseal^{(R)}$를 도포한 Fuji II $LC^{(R)}$를 준비하고 불소 유리량과 용해도를 측정하였다. 결과: 일간 불소 유리량은 표면 코팅제 간의 차이는 유의하지 않았다. 불소 누적 유리량은 56일에 RMGIC를 사용한 군에서 유의한 차이를 보였다(P < 0.05). 용해도 측정에서 표면 코팅제를 도포하지 않은 RMGIC가 다른 세 군에 비하여 7일 째에서만 유의한 차이를 보였다(P < 0.05). 결론: 표면 코팅제는 RMCIG에서 초기 용매에 의한 물성 저하를 막아 수복재 내부에 불소를 보존하며 추후 수복재의 불소의 방출과 저장에 대한 영향 또한 감소한다.

• 대한소아치과학회지
• /
• 제51권2호
• /
• pp.149-164
• /
• 2024

This study compared the solubility, water absorption, dimensional stability, release of various ions (hydroxyl, calcium, sulfur, strontium, and silicon), and cytotoxicity of light-cured resin-modified pulp-capping materials. Resin-modified calcium hydroxide (Ultra-blend^TM plus, UBP), light-cured resin-modified calcium silicate (TheraCal LC^TM, TLC), and dual-cure resin-modified calcium silicate (TheraCal PT^TM, TPT) were used. Each material was polymerized; solubility, 24-hour water absorption, and 30- day dimensional stability experiments were conducted to test its physical properties. Solubility was assessed according to the ISO 6876 standard, and 24 hours of water absorption, 30 days of dimensional stability were assessed by referring to the previous protocol respectively. Eluates at 3 and 24 hours and on 7, 14, and 28 days were analyzed according to the ISO 10993-12 standard. And the pH, Ion-releasing ability, cell proliferation rate, and cell viability were assessed using the eluates to evaluate biochemical characteristics. pH was measured with a pH meter and Ion-releasing ability was assessed using inductively coupled plasma atomic emission spectrometry (ICP-AES). Cell proliferation rate and cell viability were assessed using human dental pulp cells (hDPCs). The former was assessed by an absorbance assay using the CCK-8 solution, and the latter was assessed by Live and Dead staining. TPT exhibited lower solubility and water absorption than TLC. UBP and TPT demonstrated higher stability than TLC. The release of sulfur, strontium, calcium, and hydroxyl ions was higher for TLC and TPT than for UBP. The 28-day release of hydroxyl and silicon ions was similar for TLC and TPT. TLC alone exhibited a lower cell proliferation rate compared to the control group at a dilution ratio of 1 : 2 in cell proliferation and dead cells from Live and Dead assay evaluation. Thus, when using light-cure resin-modified pulp-capping materials, calcium silicate-based materials can be considered alternatives to calcium hydroxide-based materials. Moreover, when comparing physical and biochemical properties, TPT could be prioritized over TLC as the first choice.

• Journal of Plant Biotechnology
• /
• 제49권3호
• /
• pp.163-170
• /
• 2022

전 세계적으로 LMO (Living Modified Organisms)의 이용과 상업화는 지속적으로 증가하는 추세이다. 국내에서 LM 식물의 상업적 재배는 아직 이뤄지고 있지 않으나 연구개발 및 수입, 연구시설의 신고 등은 활발히 진행되고 있는 실정이다. LM 식물은 개발 및 환경위해성 평가 단계에서 온실과 야외 포장에서의 실험이 요구되나 개발 중인 단계에서는 아직 환경에 대한 안전성이 입증되지 않아 환경방출에 대한 안전관리가 요구된다. LM 식물의 개발 연구는 일반적으로 실험실, 격리온실, 격리포장에서 수행되며 각 연구 구역마다 LMO법 통합고시 등에서 안전관리 규정이 마련되어 있다. LM 식물 연구 사고사례 중 일본의 LM 페튜니아 유출 사고는 LM 식물 연구 도중 교잡 가능 거리에 있는 일반 식물은 LM 식물로 간주하여 취급되어야 함을 시사하고 있으며, 미국의 LM creeping bentgrass 유출 사례는 바람 등에 의해 종자의 산포가 용이한 LM 식물의 경우 종자 비산에 대한 강력한 방지 대책 수립의 필요성을 시사한다. 또한 국내 LM 들잔디 유출과 LM 면화 유출 사례는 빗물 등에 의한 식물 영양번식체 유출 및 LM 종자 혼입에 대한 안전 대책 수립의 필요성을 제시한다. 미승인된 LM 식물의 환경방출에 따른 확산은 제거와 복구에 많은 시간과 비용, 노력이 요구된다. 따라서 최근 생명공학기술을 적용하는 LM 식물들이 다양화됨에 따라 개발자 및 연구자는 환경생태계에 미치는 영향을 사전에 파악하고 환경방출 방지 등 철저한 안전관리가 요구되는 바이다.

• Journal of Pharmaceutical Investigation
• /
• 제41권2호
• /
• pp.67-73
• /
• 2011

Ion exchange resins can be one of the good carriers for sustained drug release. However, the sustained release may not be enough only with themselves and hence film coating with rate controlling polymers can be applied to have a further effect on the drug release. Due to the environmental and economic issues of organic solvent for the polymer coating, aqueous polymeric systems were selected to develop dosage forms. Among the many aqueous polymeric dispersions for the film coating, EC (ethylcellulose) based polymers such as Aquacoat$^{(R)}$ ECD and Surelease$^{(R)}$ were evaluated.A fluid-bed coating was applied as a processing method. The drug release rate was quite dependent on the coating level so the release rate could be modified easily by changing different levels of the coating. The drug release rate in the Aquacoat$^{(R)}$ coated resin particles was strongly dependent on curing, which is a thermal treatment to make homogeneous films and circumvent drug release changes during storage. After dissolution test using the compressed tablets in which the coated resin particles are contained, inhomogeneous coating and even pores could be observed showing that the mechanical properties of EC were not resistant to granulation and compaction process. However, when tablets were prepared in different batches, the release profiles were almost identical showing the feasibility of the coated resin particle as incorporated into the tablet formulation.

• Journal of Korean Neurosurgical Society
• /
• 제60권1호
• /
• pp.82-88
• /
• 2017

Objective : We assessed the surgical results of bipolar release in 31 adult patients with uncorrected congenital muscular torticollis (CMT) and more than 12 months of follow-up. Methods : Thirty-one patients underwent a bipolar release of the sternocleidomastoid muscle (SCM) and were retrospectively analyzed. The mean follow-up period was 14.9 months (range, 12-30). The mean age at time of surgery was 30.3 years (range, 20-54). Patients were evaluated with a modified Lee's scoring system, cervicomandibular angle (CMA) measurement, and a global satisfaction rating scale using patient self-reporting. Results : The modified Lee's scoring system indicated excellent results in 4 (12.9%) patients, good in 18 (58.1%), and fair in 9 (29.0%) at the last follow-up after surgery. The improvements in neck movement and head tilt were statistically significant (p<0.05). The preoperative mean CMA was $15.4^{\circ}$ (range, 5.4-29.0), which was reduced to a mean of CMA of $6.3^{\circ}$ (range, 0-25) after surgery (p<0.05). The global satisfaction rating scale was 93.7% (range, 90-100). A transient sensory deficit on the ipsilateral lower ear lobe was noted in three cases. No significant permanent complications occurred. Conclusion : Bipolar release of the SCM is a safe and reliable technique for the treatment of CMT in adults.

• 구강회복응용과학지
• /
• 제36권3호
• /
• pp.145-157
• /
• 2020

목적: 본 연구에서는 구강연조직재생에서 인간치은섬유아세포에 hydrophobically modified glycol chitosan (HGC) 기반 나노방출제어시스템을 적용 시 PI3K-AKT 신호전달의 세포생존 연관 유전자를 통해 trichloroacetic acid (TCA)와 epidermal growth factor (EGF)의 영향을 확인하고자 하였다. 연구 재료 및 방법: TCA와 EGF를 방출하는 나노방출제어시스템을 제작하였다. 실험군은 3가지 군으로 나누었다; 대조군(CON), TCA-담지형 나노방출제어시스템 투여군(EXP1), TCA-와 EGF- 담지형 나노방출제어시스템 투여군(EXP2). 인간치은섬유아세포 배양 후 PI3K-AKT 신호전달에 연관된 총 29개 유전자를 실시간 중합효소연쇄반응으로 분석했다. 일요인 분산분석 및 다중회귀분석이 사용되었다. 결과: 세포생존 관련 유전자들은 EXP1과 EXP2에서 상향조절되었다. 다중회귀분석에서는 ITGB1이 AKT1의 발현에 가장 영향력 있는 요소로 결정되었다. 결론: HGC기반 나노방출제어시스템을 통한 TCA와 EGF의 적용은 세포생존에 관한 신호전달을 상향 조절시킬 수 있다.

• Journal of Pharmaceutical Investigation
• /
• 제27권4호
• /
• pp.313-321
• /
• 1997

Ion exchange resin complexes of famotidine have been prepared by the reaction of famotidine solution with activated ion exchange resins. Complex formation efficiency between famotidine and ion exchange resin was about $80{\sim}90%$ in average, calculated by HPLC determination. Drug release characteristics from the resin complexes were evaluated by the modified percolation method. Famotidine release was dependent on the type of ion exchange resins. In the case of weakly acidic resin complexes, the cumulative released amount of famotidine was more than 90% for 1hr in pH 1.2 buffer solution. However, in the case of strongly acidic resin complexes, it was less than 5% for 3hr in the same medium. Strongly acidic resins revealed some advantages over weakly, acidic resins for overcoming instability of famotidine in gastric juice. In addition, strongly acidic resin complexes showed controlled release of famotidine in pH 6.8 buffer solution, showing the result of about 60 to 70% of drug release for 5hr. After oral administrations of famotidine-resin complexes to rats as dose of 40 mg equivalent/kg, the pharmacokinetic parameters of famotidine were obtained by model independent analysis and compared with those of famotidine solution or suspension. $C_{max}$ of famotidine-resin complex was lower than that of famotidine solution or suspension. MRT, MAT, and MDT of the complexes were greater than those of famotidine solution or suspension. From these results, it was expected that famotidine was released slowly from the complexes and absorbed continuously into systemic circulation. It was recognized that drug release from the complexes was the rate-limiting step in drug absorption, since there were close correlations between in vitro drug release and in vivo pharmacokinetic parameters.