• 한국세라믹학회지
• /
• 제38권6호
• /
• pp.568-574
• /
• 2001

수정된 기체투과법을 이용하여 다공성 지지체의 기공크기를 평가하였다. 본 연구에서의 수정된 기체투과법은 기공 내에서 유체흐름이 Hagen-Poiseiulle 법칙이 성립하는 영역으로 압력을 조절하여 투과유량을 측정하는 방법을 말한다. 수정된 기체투과법의 적합성 여부는 유체의 Reynolds number 및 기체분자의 평균자유행로를 통해 검토하였다. 다공성 지지체의 유량의 시간변화로부터 대표치를 결정하여 기공크기로 환산하였다. 본 방법에 의해 평가된 다공성 지지체의 기공크기는 30$\mu\textrm{m}$~80$\mu\textrm{m}$ 이었으며, 평균치는 50$\mu\textrm{m}$로 평가되었다. 한편 화상해석법과 비교.분석한 결과 수정된 기체투과법을 통해 평가된 기공은 내부채널의 가장 작은 부분을 나타내는 것으로 확인되었다.

• 멤브레인
• /
• 제18권2호
• /
• pp.176-184
• /
• 2008

본 연구에서 졸-겔 방법에 의하여 나노 기공을 가지는 세라믹막을 제조하여 단일 조성의 헬륨과 질소를 가지고 기체투과 실험을 수행하였다. 기공 크기 $0.1{\mu}m$, 기공율 32%의 평막형 ${\alpha}-Al_2O_3$ 지지체를 제조하였으며, 지지체를 담지하여 코팅하는 방법으로 4nm의 기공 크기를 가지는 ${\gamma}-Al_2O_3$ 중간층을 제조하였다. 실리카 졸은 TEOS의 산 촉매 가수분해와 축중합반응을 통하여 합성하였다. 막은 딥코팅과 소결과정을 거쳐 제조되었다. 졸-겔 법에 의해 합성된 세라믹 막을 통한 헬륨, 질소 투과 실험은 기체의 투과 특성을 파악하기 위하여 시행하였다. 질소에 대한 헬륨의 선택도는 $100{\sim}160$ 정도였으며 헬륨의 투과도는 $303{\sim}363K$의 온도 범위에서 $10^{-7}mol/m^2{\cdot}s{\cdot}Pa$ 정도였다.

• 한국수소및신에너지학회논문집
• /
• 제24권1호
• /
• pp.29-35
• /
• 2013

A dense mixed ionic and electronic conducting ceramic membrane is one of the most promising materials because it can be used for separation of oxygen from the mixture gas. The $ABO_3$ perovskite structure shows high chemical stability at high temperatures under reduction and oxidation atmospheres. $BaCo_{1-x-y}Fe_xZr_yO_{3-{\delta}}$ (BCFZ) was well-known material as high mechanical strength, low thermal conductivity and stability in the high valence state. Glycine Nitrate Process (GNP) is rapid and effective method for powder synthesis using glycine as a fuel and show higher product crystallinity compared to solid state reaction and citrate-EDTA method. BCFZ was fabricated by modified glycine nitrate process. In order to control the burn-up reaction, $NH_4NO_3$ was used as extra nitrate. According to X-Ray Diffraction (XRD) results, BCFZ was single phase regardless of Zr dopants from y=0.1 to 0.3 on B sites. The green compacts were sintered at $1200^{\circ}C$ for 2 hours. Oxygen permeability, methane partial oxidation rate and hydrogen production ability of the membranes were characterized by using Micro Gas Chromatography (Micro GC) under various condition. The high oxygen permeation flux of BCFZ 1-451 was about $1ml{\cdot}cm^{-2}s^{-1}$. Using the humidified Argon gas, BCFZ 1-433 produced hydrogen about $1ml{\cdot}cm^{-2}s^{-1}$.

• 공업화학
• /
• 제10권8호
• /
• pp.1099-1103
• /
• 1999

침지코팅법에 의해 지르코늄이 혼성된 폴리카르보실란(PZC)을 알루미나 지지체 위에 코팅한 후 573~823 K에서 열분해하여 무기 복합막을 제조하였으며 $1{\mu}m$의 두께를 갖는 균일한 막을 얻을 수 있었다. 무기 복합막의 기체 투과 시험은 투과기체를 He, $N_2$, $CO_2$, $O_2$로 하고 투과온도 범위를 303~423 K에서 수행하였다. 투과온도가 증가할수록 기체 투과계수와 분리계수는 증가하였다. 이러한 현상을 통해 PZC 복합막에 대해서 기체투과흐름은 activated 확산 현상을 나타내고 있음을 확인하였으며 특히 $CO_2$의 경우에 $N_2$에 대한 분리계수는 4.9로 가장 큰 값을 보였다.

• Korean Membrane Journal
• /
• 제1권1호
• /
• pp.65-72
• /
• 1999

The surface of polypropylene membrane was modified by plasma treatment using Ar,$N_{2}$, $NH_{2}$ and $O_{2}$ Permeabilities for $CO_{2}$, $N_{2}$ and separation factor for $CO_{2}$ relative to $N_{2}$ were measured. The permeation experiments were performed by a variable volume method at $25^{\circ}C$ and 0.303MPa. The effects of the plasma conditions such as treatement time power input gas flow rate and pressure in the reactor on the transport properties of modified membrane were investigated. The surface of the plasma treated membrane was analyzed by means of FTIR-ATR XPS and AFM. The surface structure of the plasma treated membrane was fairly different from that of the untreated membrane. Although the permeation rates for both $CO_{2}$ and $N_{2}$ decreased with increasing plasma treatement time the separation factor was found to be improved by the plasma treatement. The operating conditions of plasma treatement imposed on membranes had notable effect on the permeability and separation factor.

• Membrane and Water Treatment
• /
• 제6권3호
• /
• pp.251-262
• /
• 2015

In this work the preparation and characterization of a membrane containing a uniform mesoporous Titanium oxide top layer on a porous stainless steel substrate has been studied. The 316 L stainless steel substrate was prepared by powder metallurgy technique and modified by soaking-rolling and fast drying method. The mesoporous titania membrane was fabricated via the sol-gel method. Morphological studies were performed on both supported and unsupported membranes using scanning electron microscope (SEM) and field emission scanning microscope (FESEM). The membranes were also characterized using X-ray diffraction (XRD) and $N_2$-adsorption / desorption measurement (BET analyses). It was revealed that a defect-free anatase membrane with a thickness of $1.6{\mu}m$ and 4.3 nm average pore size can be produced. In order to evaluate the performance of the supported membrane, single-gas permeation experiments were carried out at room temperature with nitrogen gas. The permeability coefficient of the fabricated membrane was $4{\times}10^{-8}\;lit\;s^{-1}\;Pa^{-1}\;cm^{-1}$.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.114.1-114.1
• /
• 2010

A highly performed Pd-based hydrogen membrane has prepared successfully on a modified porous nickel support. The porous nickel support modified by impregnation method of $Al(NO_3)_3{\cdot}9H_2O$ (Aldrich Co.) over the nickel powder showed a strong resistance to hydrogen embrittlement and thermal stability. Plasma surface modification treatment was introduced as a pre-treatment process instead of conventional HCl wet activation. Ceramic barrier was coated on the external surface of the prepared nickel supports to prevent intermetallic diffusion and to enhance the affinity between the support and membrane. Palladium and copper were deposited at thicknesses of $4\mu}m$ and $0.5{\mu}m$, respectively, on a barrier-coated support by DC sputtering process. The permeation measurement was performed in pure hydrogen at $400^{\circ}C$. The single gas permeation of our membrane was two times higher than that of the previous membrane which do not have ceramic barrier.

• 한국포장학회지
• /
• 제13권3_4호
• /
• pp.113-120
• /
• 2007

The method to characterize the fresh produce respiration was presented with possible application of modified atmosphere package design. Particularly the respiration model based on enzyme kinetics was introduced as function of oxygen and carbon dioxide concentrations. The method to estimate the equilibrated package atmosphere for any package conditions was presented by incorporation of $O_2$ and $CO_2$ permeabilities of the packaging film. Temperature dependences for fresh produce respiration and gas permeation were given by Arrhenius equation and then used to analyze the effect of temperature on the package atmosphere. An example analysis was presented for better understanding of the concept.

• 한국세라믹학회지
• /
• 제29권12호
• /
• pp.970-980
• /
• 1992

${\gamma}-alumina$ membranes were prepared by sol-gel dip coating or pressurized coating of boehmite sols on slipcasted ${\gamma}-alumina$ support tubes. The particle size of sols synthesized via the modified Yoldas-method could be controlled below 5 mn according to the mole ratio of nitric acid/aluminumtri-sec-butoxide (0.07~1.0). The reproducible crack-free composite membranes were produced by the 2nd dip coating or the pressurized coating technique using very stable sols with the particle size of 45 nm. Nitrogen gas permeability through the top-layer in the composite membrane was about $70~55{\times}10^{-7}\;mol/m^2{\cdot}s{\cdot}Pa$. The thermal stability of the top layer was proved to be good enough upto the heat-treatment temperature of $500^{\circ}C$.

• 멤브레인
• /
• 제29권1호
• /
• pp.51-60
• /
• 2019

분리막 소재의 투과도와 선택도 사이의 trade-off 관계로 인해 여전히 많은 연구가 필요하다. 특히 고분자 분리막에 무기물 나노입자가 들어가 있을 때, 기체투과 거동의 학문적 이해는 여전히 부족하다. 따라서 본 연구에서는 분리막 소재로 가장 많이 사용되는 PDMS에 2~5 nm의 기공을 가지고 있으며 직경이 약 5 nm 크기의 aluminosilicate hollow nanoparticles인 allophane을 이용하여 복합매질 분리막을 제조하여 기체투과특성을 연구하였다. 대표적인 분리막 소재인 PDMS에 친수성 allophane, 그리고 나노입자에 undecylenic acid로 표면을 개질한 allophane을 막 내부에 고르게 분산시켜 함량 별로 복합매질 분리막을 제조하였다. 나노입자가 분산된 혼합매질 분리막 내에서 기체의 투과 특성을 파악하고, 이에 따른 기체투과 거동과 나노입자가 가지고 있는 기공의 역할을 평가하고자 하였다. 표면개질된 allophane을 첨가함에 따라 기체 투과도와 산소/질소 그리고 이산화탄소/메탄의 선택도가 동시에 점진적으로 향상되는 결과를 얻었다.