• 한국환경과학회지
• /
• 제32권1호
• /
• pp.57-65
• /
• 2023

The advanced oxidation treatment using persulfate and zero-valent iron (ZVI) has been evaluated as a very effective technology for remediation of soil and groundwater contamination. However, the high rate of the initial reaction of persulfate with ZVI causes over-consumption of an injected persulfate, and the excessively generated active species show a low transfer rate to the target pollutant. In this study, ZVI was modified using selenium with very low reactivity in the water environment with the aim of controlling the persulfate activation rate by controlling the reactivity of ZVI. Selenium-modified ZVI (Se/ZVI) was confirmed to have a selenium coating on the surface through SEM/EDS analysis, and low reductive reactivity to trichlroethylene (TCE) was observed. As a result of inducing the persulfate activation using the synthesized Se/ZVI, the persulfated consumption rate was greatly reduced, and the decomposition rate of the model contaminant, anisole, was also reduced in proportion. However, the final decomposition efficiency was rather increased, which seems to be the result of preventing persulfate over-consumption. This is because the transfer efficiency of the active species (SO4-∙) of persulfate to the target contaminant has been improved. Selenium on the surface of Se/ZVI was not significantly dissolved even under oxidation conditions by persulfate, and most of it was present in the form of Se/ZVI. It was confirmed that the persulfate activation rate could be controlled by controlling the reactivity of ZVI, which could greatly contribute to the improvement of the persulfate oxidation efficiency.

• 한국환경과학회지
• /
• 제25권4호
• /
• pp.517-524
• /
• 2016

In order to treat groundwater containing high levels of nitrate, nitrate reduction by nano sized zero-valent iron (nZVI) was studied using batch experiments. Compared to nitrate removal efficiencies at different mass ratios of $nitrate/Fe^0$, the removal efficiency at the mass ratio of 0.02% was the highest(54.59%). To enhance nitrate removal efficiency, surface modification of nZVI was performed using metallic catalysis such as Pd, Ni and Cu. Nitrate removal efficiency by Cu-nZVI (at $catalyst/Fe^0$ mass ratio of 0.1%) was 66.34%. It showed that the removal efficiency of Cu-nZVI was greater than that of the other catalysts. The observed rate constant ($k_{obs}$) of nitrate reduction by Cu-nZVI was estimated to $0.7501min^{-1}$ at the Cu/Fe mass ratio of 0.1%. On the other hand, TEM images showed that the average particle sizes of synthetic nZVI and Cu-nZVI were 40~60 and 80~100 nm, respectively. The results imply that catalyst effects may be more important than particle size effects in the enhancement of nitrate reduction by nZVI.

• 대한환경공학회지
• /
• 제38권12호
• /
• pp.667-675
• /
• 2016

나노 기술에 대한 관심이 증가함에 따라 다양한 종류의 나노 물질이 환경 정화 분야에서 활발히 연구되고 있다. 이에 따라 새롭게 개발된 나노 물질의 성능을 쉽고 신속하게 측정할 수 있는 분석법에 대한 요구가 증가하고 있다. 본 연구에서는 토양/지하수 정화 분야에서 활발히 사용되는 나노 영가철의 환원 반응성을 쉽고 신속하게 측정할 수 있는 방법으로써 수정된 인도페놀법을 제시하였다. 인도페놀법에서 한계반응물로 작용하던 암모늄과 과량으로 존재하던 페놀을 치환하여 사용함으로써 페놀류에 대한 정량 분석이 가능하도록 수정하였다. 대상으로 한 나노 영가철에 의한 환원 반응은 4-클로로페놀의 페놀로의 환원과 나이트로벤젠의 아닐린으로의 환원이었으며, 수정된 인도페놀법은 반응생성물인 페놀과 아닐린에 대하여 선택성을 나타내 분석 방법으로 사용이 가능함을 확인하였다. 민감도 향상을 위하여 발색 시약의 농도 및 반응 시간, 시료의 전처리 등의 영향에 대하여 평가하였다. 실제 시료를 대상으로 시험하였을 때, 용존 철 이온에 의한 저해 영향을 확인하여 탄산나트륨 용액 주입의 전처리를 이용하여 해결하였다. 최종적으로 개발된 분석 방법을 이용하여 나노 영가철 및 이중금속 나노영가철의 환원 반응성을 측정하였으며, 결과적으로 환원 반응 속도의 차이뿐 아니라 환원 기작의 차이도 구분할 수 있는 가능성을 보여 주어 나노 영가철의 환원과 관련된 연구 분야에서 유용하게 사용될 수 있을 것으로 사료된다.

• 한국환경과학회지
• /
• 제26권7호
• /
• pp.859-868
• /
• 2017

In this study, the reductive dechlorination of triclosan using zero-valent iron (ZVI, $Fe^0$) and modified zero-valent iron (i.e., acid-washed iron (Aw/Fe) and palladium-coated iron (Pd/Fe)) was experimentally investigated, and the reduction characteristics were evaluated by analyzing the reaction kinetics. Triclosan could be reductively decomposed using zero-valent iron. The degradation rates of triclosan were about 50% and 67% when $Fe^0$ and Aw/Fe were used as reductants, respectively, after 8 h of reaction. For the Pd/Fe system, the degradation rate was about 57% after 1 h of reaction. Thus, Pd/Fe exhibited remarkable performance in the reductive degradation of triclosan. Several dechlorinated intermediates were predicted by GC-MS spectrum, and 2-phenoxyphenol was detected as the by-product of the decomposition reaction of triclosan, indicating that reductive dechlorination occurred continuously. As the reaction proceeded, the pH of the solution increased steadily; the pH increase for the Pd/Fe system was smaller than that for the $Fe^0$ and Aw/Fe system. Further, zero-order, first-order, and second-order kinetic models were used to analyze the reaction kinetics. The first-order kinetic model was found to be the best with good correlation for the $Fe^0$ and Aw/Fe system. However, for the Pd/Fe system, the experimental data were evaluated to be well fitted to the second-order kinetic model. The reaction rate constants (k) were in the order of Pd/Fe > Aw/Fe > $Fe^0$, with the rate constant of Pd/Fe being much higher than that of the other two reductants.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권2호
• /
• pp.15-21
• /
• 2012

MTBE (Methyl tertiary-butyl ether) has been commonly used as an octane enhancer to replace tetraethyl lead in gasoline, because MTBE increases the efficiency of combustion and decreases the emission of carbon monoxide. However, MTBE has been found in groundwater from the fuel spills and leaks in the UST (Underground Storage Tank). Fenton's oxidation, an advanced oxidation catalyzed with ferrous iron, is successful in removing MTBE in groundwater. However, Fenton's oxidation requires the continuous addition of dissolved $Fe^{2+}$. Zero-valent iron is available as a source of catalytic ferrous iron of MFO (Modified Fenton's Oxidation) and has been studied for use in PRBs (Permeable Reactive Barriers) as a reactive material. Therefore, this study investigated the condition of optimization in MFO-PRBs using waste zero-valent iron (ZVI) with the waste steel scrap to treat MTBE contaminated groundwater. Batch tests were examined to find optimal molar ratio of MTBE : $H_2O_2$ on extent to degradation of MTBE in groundwater at pH 7 with 10% waste ZVI. As the results, the ratio of optimization of MTBE to hydrogen peroxide for MFO was determined to be 1:300[mM]. The column experiment was conducted to know applicability of MFO-PRBs for MTBE remediation in groundwater. As the results of column test, MTBE was removed 87% of the initial concentration during 120days of operational period. Interestingly, MTBE was degraded not only within waste ZVI column but also within sand column. It means the aquifer may affect continuously the MTBE contaminated groundwater after throughout the waste ZVI barrier. The residual products showed acetone, TBF (Tert-butyl formate) and TBA (Tert-butyl acetate) during this test. The results of the present study showed that the recycled materials can be effectively used for not only a source of catalytic ferrous iron but also a reactive material of the MFO-PRBs to remove MTBE in groundwater.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제14권6호
• /
• pp.101-107
• /
• 2009

카르복시메틸 셀룰로즈(carboxymethyl cellulose, CMC)와 같은 안정화제는 오염된 지하대수층에서 영가철 나노입자의 이동을 촉진할 수 있다. 본 연구에서는 CMC로 개질된 영가철 나노입자의 이동성을 컬럼실험을 통해 조사하였다. CMC로 개질된 100 mg/L 영가철 나노입자는 모래로 이루어진 공극매체에서 이동이 가능하였다. 하지만 비개질된 영가철 나노입자는 제조된 용액에서 쉽게 엉김현상이 나타났고, 모래로 이루어진 공극매체에서 통과하지 못했다. pH가 7일 때 영가철 나노입자 약 80%가 컬럼을 통과하여 흘러나왔다. pH가 5이하로 감소할 때는, 100%의 CMC로 개질 된 영가철 나노입자는 100%가 흘러나왔다. 이온강도세기 실험에서 $Na^+$과 $Ca^{2+}$ 이온의 농도가 증가함에 따라 CMC로 개질된 영가철의 이동성이 다소 감소하는 것으로 나타났다. 점토과 자연유기물(natural organic matter, NOM) 영향 실험에서는, 1과 5%의 점토와 100과 1000 mg/L의 자연유기물질은 CMC로 개질된 영가철 나노입자의 이동성에는 크게 영향을 주지 못하는 것으로 나타났다. 본 실험의 결과로부터 CMC로 개질된 영가철 나노입자는 다양한 이온세기, 자연유기물농도 및 점토함량을 가진 토양내에서도 효과적으로 이동될 것으로 기대된다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.67-70
• /
• 2002

Remediation of groundwater contaminated with chlorinated organics, nitro aromatics, and heavy metals using zero valent iron (ZVI) filings has paid considerable attention in recent years. When the contaminants of high concentration leaked abundantly in subsurface environment, permeable reactive barrier technology using iron filing is taken a long time for the remediation of contaminated groundwater, The problem of contaminant shock is able to be solved using surfactant (hexadecyltrimethylammonium, HDTMA) modified bentonite (SMB) as immobilizing material. Therefore, the purpose of this research was to develop the combined remediation technology using conventional permeable reactive and immobilizing barrier for the enhanced decontamination of chlorinated compounds. Four column experiments were conducted to assess the performance of the mixed reactive materials with Ottawa sand, iron filing, and HDTMA-bentonite for trichloroethylene (TCE) removal under controlled groundwater flow conditions. TCE reduction rates with sand/iron filing/HDTMA-bentonite were highest among four column due to dechlorination of TCE by iron filing and sorption of TCE by SMB.

• 한국환경과학회지
• /
• 제25권12호
• /
• pp.1717-1726
• /
• 2016

In this study, the reductive decolorization of three acid and basic dyes using modified zero-valent iron (i.e., acid-washed iron (Aw/Fe) and palladium coated iron (Pd/Fe)) at various pH conditions (pH 3~5) was experimentally investigated and the decolorization characteristics were evaluated by analyzing the absorbance spectra and reaction kinetics. In the case of acid dyes such as methyl orange and eriochrome black T, color removal efficiencies increased as initial pH of the dye solution decreased. However, the color removal of methylene blue, a basic dye, was not affected much by the initial pH and more than 70% of color was removed within 10 min. During the decolorization reaction, the absorbance of methyl orange (${\lambda}_{max}=464nm$) and eriochrome black T (${\lambda}_{max}=528nm$) decreased in the visible range but increased in the UV range. The absorbance of methylene blue (${\lambda}_{max}=664nm$) also decreased gradually in the visible range. Pseudo-zero order, pseudo-first order, and pseudo-second order kinetic models were used to analyze the reaction kinetics. The pseudo-second order kinetic model was found to be the best with good correlation. The decolorization reaction rate constants ($k_2$) of methylene blue were relatively higher than those of methyl orange and eriochrome black T. The reaction rate constants of methyl orange and eriochrome black T increased with a decrease in the initial pH.