• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.133-137
• /
• 2009

Bleed 영역이 있는 흡입구 주위의 초음속 유동에 대한 수치 모사를 수행하였다. 이를 위하여 RANS(Reynolds Averaged Navier-Stokes) 방정식과 2-방정식 난류 모델 방정식을 기반으로 한 기존의 코드를 축대칭형으로 변환하고 bleed 경계 조건을 적용하였다. 본 논문에서는 개발한 코드를 검증하기 위해 범프(bump)와 경사충격파와 bleed 영역이 있는 평판 주위에서의 흐름에 대해 실험치 및 타 수치 해석 결과와 비교하였다. 개발한 코드를 이용하여 bleed 장치가 장착된 축대칭 초음속 흡입구 주변의 유동에 대한 수치 모사를 수행하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.104-111
• /
• 2009

The existing code which solves two-dimensional RANS(Reynolds Averaged Navier-Stokes) equations and 2-equation turbulence model equations was modified to enable numerical simulation of various supersonic flows. For this, various boundary conditions have been implemented to the code. Bleed boundary condition was incorporated into the code for calculating wall mean flow quantities. Furthermore, the boundary conditions for the turbulence quantities along rough surfaces as well as porous walls were applied to the code. The code was verified and validated by comparing the computational results against the experimental data for the supersonic flows over bleed region on a flat plate. Using the newly modified code, numerical simulations were performed and compared with other computational results as well as the experimental data for the supersonic flows over an oblique shock with a bleed region.

• Tribology and Lubricants
• /
• 제5권2호
• /
• pp.48-54
• /
• 1989

The effects of angular misalignment, coning and the temperature difference between the primary seal ring and the seal seat on the pressure distribution in mechanical face seals are analyzed. The modified Reynolds equation for the temperature dependent viscosity was solved by a finite difference approximation and Gauss-Seidel method. It is shown that the amplitude of pressure is significantly affected by the misalignment of the seals and a large temperature difference between the rotor and the stator.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1993년도 제18회 학술대회 초록집
• /
• pp.63-69
• /
• 1993

In this paper the characteristics of Hydrostatic Bearing of piston of cylinder are investigated . The dynamic characteristic equations of piston considering both parallel and rotational motion and time dependent modified Reynolds Equation are analyzed and the dynamic pressure distribution of oil film is numerically calculated by perturbation method and finite difference method. and the atatic analysis is carried out. so, the influence of design parameter of piston on the characteristic of bearing is analyzed.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.105-106
• /
• 2002

An expanded scheme of direct numerical solution method for solving the Reynolds' equation in the boundary fitted coordinate systems for the gas lubrication with ultra low clearance is presented. Skewed slider is calculated by this scheme and results are compared to the original direct numerical solution. The modified scheme has advantages in stability in high compressibility number region. At the lower A region the difference in results of original and modified method is several percents.

• 설비공학논문집
• /
• 제6권3호
• /
• pp.227-236
• /
• 1994

Steady flows of Newtonian and non-Newtonian fluids in the stenotic tubes with various stenotic shapes are numerically simulated. Validity of the modified power-law model as a constitutive equation for the purely viscous non-Newtonian fluid is discussed and the results of the power-law model are compared with those of the Carreau model, the Powell-Eyring model and experimental data for blood. Flow characteristics and reattachment lengths for non-Newtonian fluids in the stenotic tubes are presented extensively. Also, the analysis is extended to predict the influences of diameter ratio, stenosis spacing, number of stenosis and Reynolds number on the flow characteristics in the multiple stenotic tubes.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.161-165
• /
• 2004

In the vortex particle method based on the vorticity-velocity formulation for solving the Wavier-Stokes equations, the unsteady, incompressible, viscous laminar flow over a NACA 0012 foil is simulated. By applying an operator-splitting method, the 'convection' and 'diffusion' equations are solved sequentially at each time step. The convection equation is solved using the vortex particle method, and the diffusion equation using the particle strength exchange(PSE) scheme which is modified to avoid a spurious vorticity flux. The scheme is improved for variety body shape using one image layer scheme. For a validation of the present method, we illustrate the early development of the viscous flow about an impulsively started NACA 0012 foil for Reynolds number 550.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1509-1514
• /
• 1990

본 연구에서는 비압축성 유체가 온도의 영향을 받아 변화하는 경우에 대한 시 일링 간극내에서의 압력분포를 유한차분법을 이용하여 해석하였다. 여러기서 얻어진 결과를 이용하여 시일의 축력과 모멘트를 해석함으로써 시일의 동적 불안정성에 대하 여 논하였다. 이 때 기계평면시일의 형상은 코닝이 있고, 시일의 중심축이 경사진 경우를 고려하였다.

• 설비공학논문집
• /
• 제6권4호
• /
• pp.325-336
• /
• 1994

A numerical simulation of velocity and temperature fields and Nusselt number distributions is performed by using the algebraic stress model (ASM) for the velocity profiles and low Reynolds number ${\kappa}-{\varepsilon}$ model and the algebraic heat flux model(AHFM) for turbulent heat transfer in a $180^{\circ}$ bend with a constant wall heat flux. In the low Reynolds number ${\kappa}-{\varepsilon}$ model, turbulent Prandtl number is modified by considering the streamline curvature effect and the non-equilibrium effect between turbulent kinetic energy production and dissipation rate. Every heat flux term presented in the transport equation of turbulent heat flux is reduced to algebraic expressions in a way similar to algebraic stress model. Also. in the wall region, low Reynods number algebraic heat flux model(AHFM) is applied.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.865-875
• /
• 1988

본 연구에서는 부정숙 등에 의한 실험결과를 토대로 하여, 단이 진 2차원 벽 면분류에 대한 수치해석으로 표준 K-.epsilon.모델과 LRM 그리고 PAM을 적용하고, upwind 및 skew-upwind scheme을 적용하여 그 결과를 검토하고자 한다.