• 한국지하수토양환경학회지:지하수토양환경
• /
• 제11권6호
• /
• pp.69-75
• /
• 2006

지하 저장 탱크로부터의 유류 유출로 인하여 전세계적으로 넓은 지역의 토양 및 지하수가 오염되고 있다. Methyl tert-butyl ether(MTBE)는 대기 오염 감소를 위하여 널리 사용되고 있는 유류 첨가제이지만 토양 및 지하수로 유입되어 섭취 되었을 때 발암 가능성이 있는 유독 물질이다. 본 연구는 고도 산화 처리 기법 중 유기 오염물의 분해에 높은 효율을 나타내는 고전적 Fenton reaction의 최대 단점인 강한 산성(pH 2.5-3) 의존성을 극복한 새로운 산화 처리 기법을 개발하여 고농도의 MTBE를 효과적으로 분해 하는 것을 그 목적으로 하여 자연 친화적인 chelating agents를 사용하여 중성 영역에서 Fenton reaction을 가능하게 하는 기법인 Modified Fenton reaction과 Ultra Violet light(UV)를 이용하여 분해효율을 극대화 하는 Photo-assisted Fenton reaction을 응용한 Modified Photo-Fenton reaction system을 개발하여 최적 반응 조건 및 반응 차수, 반응 메커니즘을 밝혀내었다. 낮은 독성과 높은 생분해성을 나타낸 Citrate ion을 chelating agents로 선정하였으며 최적 반응 조건은 [$Fe^{3+}$] : [Citrate] = 1 mM : 4 mM, 3% $H_2O_2$, 17.4 kWh/L UV dose, 초기 pH 6.0이며 이 조건에서 1000 ppm MTBE를 분해한 결과 6시간 후 86.75%, 16시간 후 99.99%의 높은 분해율을 나타냈으며 최종 pH는 6.02로 안정적이었다. 또한 Modified Photo-Fenton reaction을 이용한 MTBE 분해 반응은 유사 1차 반응을 나타내었으며 methoxy group이 ${\cdot}OH$ radical과 주로 반응하여 tert-butyl formate(TBF)가 주요 분해 산물이 되는 분해 경로를 따른 다는 것이 밝혀졌다. 본 연구로 개발된 Modified Photo-Fenton reaction에서 발생되는 산화제인 ${\cdot}OH$ radical의 비선택적 반응성을 고려할 때 본 system은 다른 종류의 유기 오염물 분해에도 효과적일 것으로 판단된다.

• 한국재료학회지
• /
• 제19권9호
• /
• pp.481-487
• /
• 2009

The photocatalysts of Fe-ACF/$TiO_2$ compositeswere prepared by the sol-gel method and characterized by BET, XRD, SEM, and EDX. It showed that the BET surface area was related to adsorption capacity for each composite. The SEM results showed that ferric compound and titanium dioxide were distributed on the surfaces of ACF. The XRD results showed that Fe-ACF/$TiO_2$ composite only contained an anatase structure with a Fe mediated compound. EDX results showed the presence of C, O, and Ti with Fe peaks in Fe-ACF/$TiO_2$ composites. From the photocataytic degradation effect, $TiO_2$ on activated carbon fiber surface modified with Fe (Fe-ACF/$TiO_2$) could work in the photo-Fenton process. It was revealed that the photo-Fenton reaction gives considerable photocatalytic ability for the decomposition of methylene blue (MB) compared to non-treated ACF/$TiO_2$, and the photo-Fenton reaction was improved by the addition of $H_2O_2$. It was proved that the decomposition of MB under UV (365 nm) irradiation in the presence of $H_2O_2$ predominantly accelerated the oxidation of $Fe^{2+}$ to $Fe^{3+}$ and produced a high concentration of OH radicals.

• Bulletin of the Korean Chemical Society
• /
• 제31권6호
• /
• pp.1589-1595
• /
• 2010

In order to effective degradation of organic dye both under visible light or ultrasonic irradiation, the MWCNTs (multiwalled carbon nanotube) deposited with Fe and $TiO_2$ were prepared by a modified sol-gel method. The Fe/$TiO_2$-MWCNT catalyst was characterized by surface area of BET, scanning electron microscope (SEM), Transmission Electron Microscope (TEM), X-ray diffraction (XRD), and energy dispersive X-ray (EDX) and ultraviolet-visible (UV-vis) spectroscopy. The low intensity visible light and low power ultrasound was as an irradiation source and the methylene blue (MB) was choose as the model organic dye. Then degradation experiments were carried out in present of undoped $TiO_2$, Fe/$TiO_2$ and Fe/$TiO_2$-MWCNT catalysts. Through the degradation of MB solution, the results showed the feasible and potential use of Fe/$TiO_2$-MWCNT catalyst under visible light and ultrasonic irradiation due to the enhanced formation of reactive radicals as well as the possible visible light and the increase of ultrasound-induced active surface area of the catalyst. After addition of $H_2O_2$, the MB degradation rates have been accelerated, especially with Fe/$TiO_2$-MWCNT catalyst, in case of that the photo-Fenton reaction occurred. The sonophotocatalysis was always faster than the respective individual processes due to the more formation of reactive radicals as well as the increase of the active surface area of Fe/$TiO_2$-MWCNT catalyst.