• Advances in nano research
• /
• 제6권1호
• /
• pp.39-55
• /
• 2018

Forced vibration analysis of a cracked functionally graded microbeam is investigated by using modified couple stress theory with damping effect. Mechanical properties of the functionally graded beam change vary along the thickness direction. The crack is modelled with a rotational spring. The Kelvin-Voigt model is considered in the damping effect. In solution of the dynamic problem, finite element method is used within Timoshenko beam theory in the time domain. Influences of the geometry and material parameters on forced vibration responses of cracked functionally graded microbeams are presented.

• Interaction and multiscale mechanics
• /
• 제5권4호
• /
• pp.385-397
• /
• 2012

In this paper the dynamic stiffness matrix method was used for the free vibration analysis of axially moving micro beam with constant velocity. The extended Hamilton's principle was employed to derive the governing differential equation of the problem using the modified couple stress theory. The dynamic stiffness matrix of the moving micro beam was evaluated using appropriate expressions of the shear force and bending moment according to the Euler-Bernoulli beam theory. The effects of the beam size and axial velocity on the dynamic characteristic of the moving beam were investigated. The natural frequencies and critical velocity of the axially moving micro beam were also computed for two different end conditions.

• 대한기계학회논문집
• /
• 제16권12호
• /
• pp.2287-2297
• /
• 1992

본 연구에서는 먼저 곡률요소에서와 같이 Timoshenko보를 기술하는 모든 변수 들을 평형방정식과 함께 고려할 때 각 변수들에 대한 새로운 해석이 가능함을 보이고 자 한다. 이는 횡변위장을 곡률로 수정함으로써 시작되는데 수정횡변위장을 사용할 경우, 보를 기술하는 모든 변수들이 Euler보의 그것들과 형태상으로 동일하게 나타나 며 수학적으로 볼 때 간결하면서도 새로운 접근 방법을 제시해 준다. 또한 이러한 수정횡변위장을 사용할 경우 순수변위에 기초하고 있는 전통적인 구조요소의 정식화과 정과 같은 과정을 거치게 되는 잇점이 있다. 한편, 직선 보요소의 정식화 과정에는 수정횡변위장의 형상함수로서 전통적인 Hermite 보 요소의 형상함수를 도입하였는데 이는 회전각의 장이 수정횡변위장의 미분치로 주어지기 때문이다.마지막 단계로서, 수정횡변위치가 포함된 절점에서의 변위벡터와 원횡변위치가 포함된 변위벡터 사이에 존재하는 변환행렬을 찾아 내었다.

• Structural Engineering and Mechanics
• /
• 제73권3호
• /
• pp.287-302
• /
• 2020

This investigation deals with a size-dependent coupled thermoelasticity analysis based on Green-Naghdi (GN) theory in nano scale using a new modified nonlocal model of heat conduction, which is based on the GN theory and nonlocal Eringen theory of elasticity. In the analysis based on the proposed model, the nonlocality is taken into account in both heat conduction and elasticity. The governing equations including the equations of motion and the energy balance equation are derived using the proposed model in a nano beam resonator. An analytical solution is proposed for the problem using the Laplace transform technique and Talbot technique for inversion to time domain. It is assumed that the nano beam is subjected to sinusoidal thermal shock loading, which is applied on the one of beam ends. The transient behaviors of fields' quantities such as lateral deflection and temperature are studied in detail. Also, the effects of small scale parameter on the dynamic behaviors of lateral deflection and temperature are obtained and assessed for the problem. The proposed GN-based model, analytical solution and data are verified and also compared with reported data obtained from GN coupled thermoelasticity analysis without considering the nonlocality in heat conduction in a nano beam.

• 한국전자파학회논문지
• /
• 제9권2호
• /
• pp.141-148
• /
• 1998

빔 성형 안테나를 개발하기 위해서 변형된 전송선로형 안테나(MTLA)의 둘레 및 수평, 수직 소자 길이를 가변한다. 빔 틸트 특성의 검증을 위해 각각의 변형된 형상을 갖는 MTLA에 대한 수직면 방사패턴을 모먼트법으로 해석한다. 해석 결과로부터 구현될 수 있는 최대 빔 틸트는 주로 수직 소자길이에따라 결정된다는 사실올 확 인하였다. 최대 빔 틸트를 갖는 안테나를 셜게하고 입력 임피던스 및 방사 특성을 이론적으로 계산하고 실험에 의하여 확인하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1990년도 봄 학술발표회 논문집
• /
• pp.12-17
• /
• 1990

Stepped bean with immovable ends for large amplitude of vibration including effects of longitudinal displacement, shear deformation and rotary inertia is investigated for free and forced vibration using finite element method. Modified harmonic force matrix is introduced for analysis of vibration with finite amplitude of the stepped beam under uniform hamonic loading and beam with nonuniform harmonic loading. Numerical examples of stepped beam with various support conditions are analysed for deflections and natural frequencies. Results show that the proposed method is valid and efficient.

• 대한기계학회논문집
• /
• 제17권12호
• /
• pp.3020-3027
• /
• 1993

Curved beam element has received attention because of its own usefulness and its bearing on general curved elements like shells. In conventional curved beam elements stiffness matrix is overestimated and eigensolutions are poor. To avoid this phenomenon it is necessary to use a large number of elements and, as a result, the total number of degrees of freedom is increased. In this paper the two-noded, with three degrees of freedom at each node, in-plane curvature-based curbed beam element is employed in eigen-analysis of curved beam. It is shown that the curvature-based beam element is very efficient in vibration analysis and also that it is applicable to both thin and thick curved beams.

• Wind and Structures
• /
• 제27권6호
• /
• pp.431-438
• /
• 2018

This paper presents a free vibration analysis of size-dependent functionally graded (FG) nanobeams with all surface effects considerations on the basis of modified couple stress theory. The material properties of FG nanobeam are assumed to vary according to power law distribution. Based on the Euler-Bernoulli beam theory, the modeled nanobeam and its equations of motion are derived using Hamilton's principle. An analytical method is used to discretize the model and the equation of motion. The model is validated by comparing the benchmark results with the obtained results. Results show that the vibration behavior of a nanobeam is significantly influenced by surface density, surface tension and surface elasticity. Also, it is shown that by increasing the beam size, influence of surface effect reduces to zero, and the natural frequency tends to its classical value.

• Wind and Structures
• /
• 제21권3호
• /
• pp.273-287
• /
• 2015

In this paper, a free vibration analysis of functionally graded beam made of porous material is presented. The material properties are supposed to vary along the thickness direction of the beam according to the rule of mixture, which is modified to approximate the material properties with the porosity phases. For this purpose, a new displacement field based on refined shear deformation theory is implemented. The theory accounts for parabolic distribution of the transverse shear strains and satisfies the zero traction boundary conditions on the surfaces of the beam without using shear correction factors. Based on the present refined shear deformation beam theory, the equations of motion are derived from Hamilton's principle. The rule of mixture is modified to describe and approximate material properties of the FG beams with porosity phases. The accuracy of the present solutions is verified by comparing the obtained results with the existing solutions. Illustrative examples are given also to show the effects of varying gradients, porosity volume fraction, aspect ratios, and thickness to length ratios on the free vibration of the FG beams.

• Structural Engineering and Mechanics
• /
• 제61권2호
• /
• pp.193-207
• /
• 2017

In this study, the vibration of an electrostatically actuated micro cantilever beam is analyzed in which a viscoelastic layer covers a portion of the micro beam length. This proposed model is considered as the main element of mass and pollutant micro sensors. The nonlinear motion equation is extracted by means of Hamilton principle, considering nonlinear shortening effect for Euler-Bernoulli beam. The non-linear effects of electrostatic excitation, geometry and inertia have been taken into account. The viscoelastic model is assumed as Kelvin-Voigt model. The motion equation is discretized by Galerkin approach. The linear free vibration mode shapes of non-uniform micro beam i.e. the linear mode shape of the system by considering the geometric and inertia effects of viscoelastic layer, have been employed as comparison function in the process of the motion equation discretization. The discretized equation of motion is solved by the use of multiple scale method of perturbation theory and the results are compared with the results of numerical Runge-Kutta approach. The frequency response variations for different lengths and thicknesses of the viscoelastic layer have been founded. The results indicate that if a constant volume of viscoelastic layer is to be deposited on the micro beam for mass or gas sensor applications, then a modified configuration may be found by using the analysis of this paper.