• Composites Research
• /
• 제19권5호
• /
• pp.12-19
• /
• 2006

In this paper, conceptual structural design of the main wing for a small scale WIG(Wing in Ground Effect) among high speed ship projects, which will be a high speed maritime transportation system for the next generation in Rep. of Korea, was performed. The Carbon/Epoxy material was selected for the major structure, and the skin-spar with a foam sandwich structural type was adopted for improvement of lightness and structural stability. As a design procedure for the present study, firstly the design load was estimated through the critical flight load case study, and then flanges of the front and rear spars from major bending loads and the skin and the spar webs from shear loads were preliminarily sized using the netting rule and the rule of mixture. Stress analysis was performed by a commercial FEA code, NASTRAN. From the stress analysis results for the first designed wing structure, it was confirmed that the upper skin between the front spar and the rear spar was unstable fer the buckling. Therefore in order to solve this problem, a middle spar and the foam sandwich type structure at the skin and the web were added. After design modification, the structural safety and stability for the final design feature was confirmed. In addition to this, the insert bolt type structure with eight high strength bolts to fix the wing structure to the fuselage was adopted for easy assembly and removal as well as in consideration of more than 20 years fatigue life.

• Clinics in Shoulder and Elbow
• /
• 제3권2호
• /
• pp.61-67
• /
• 2000

Purpose: Most proximal humeral fractures are minimally displaced and can be treated satisfactorily with a conservative method. But in many comminuted fractures, hemiarthroplasty is usually done as a primary treatment. The authors evaluated how much functional improvement was achieved after hemiarthroplasty and which factors influence on the final functional results. Materials and Methods: Eleven hemiarthroplasties were performed for three- and four-part fractures(including fracture-dislocation) between April 1992 and June 1999. There were eight women and three men, and the mean age was 65 years. According to Neer classification, six was three-part fracture and five was four-part fracture. Six patients were injured on their right shoulder and five on the left shoulder. Among the five four-part fractures, three had axillary nerve injury and among the six three-part fractures, only one patient had axillary nerve injury. The average follow-up period was 2.4 years(1 year-7 years) after operation. The functional results were evaluated with the UCLA scoring system(Modification for hemiarthroplasty). In addition to the overall results, we compared the results according to the classification of the fracture, the cause of injury, and whether the axillary nerve was injured. Results: At the last follow-up, average total UCLA score was 18.2. The mean score for pain was 7.0, mean muscle power and motion score was 5.5 and 5.7 respectively. The pain relief was more satisfactory than any other functional results. The average score for three-part fractures was 22, and the average for four-part fractures was 13.6. The average score for the patients fractured by vehicle accidents was 15.3, and 19.3 for the patients fractured by slip-down injury. In patients without axillary nerve injury, the average score was 20, and with axillary nerve injury, the score was 15. Conclusion: Shoulder hemiarthroplasty, for the treatment of proximal humeral fractures, cannot restore the shoulder function to normal, but can achieve the functional result to some degree, especially for the activity of daily living. And as for pain, we think that it is relatively effective measure. And we think that the severer the comminution, the more the chance of axillary nerve injury, and the poorer the functional results. In conclusion, the severity of initial injury seems to be the major prognostic factor.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• 제10권4호
• /
• pp.350-357
• /
• 2017

This study was conducted as a post - study on the development of a centralized controller and a hydraulic lift system including structural analysis and remote control for the development of a vertically elevated car. The safety review was carried out through the structural modification of the elevator lift which was developed during the previous research. 3D modeling was performed with Solidworks, and a model of finite element was created through Hypermesh S / W. In addition, the loading environment of the work vehicle for the evaluation is a condition in which the loading amount is 250 kg per position (total, upper, upper, lower, and lower) on the work table, ), The structural analysis was carried out under the condition that the load was 600 kg, and safety was examined in various aspects. As a result, when the allowable load of 250 kg and the excess load of 600 kg are excluded (except Case-11), the stress level is below the yield strength. In the case of Case-11, there is a region exceeding the yield strength at the center support portion of the safety bar at the upper end even after excluding the component which generates the maximum stress, but it does not affect the safety aspect of the whole structure Respectively. Looking at the deflection results, it can be seen that in all cases the maximum deflection occurs in the same table, and the tendency of sagging in both 250 kg and 600 kg is the same.

• 재활복지
• /
• 제17권4호
• /
• pp.339-370
• /
• 2013

This study is to suggest necessary improvements of inconvenient elements as well as the ergonomic design standard to develop disabled cars by evaluating the types of needs and observing the behavior characteristics on their car use and the survey on the complaints of the disabled drivers and their guardians in the use of disabled car. The results of this study are as follows. First, both the disabled drivers and their guardians are found to feel high inconvenience and low satisfaction with the cars they use now. Second, the disabled owner-drivers also answered in a same way as guardians. They find the most difficulty in moving the supporting equipment to get into and out of a car. Both the owner-drivers with disabilities and guardians complained of lack of handiness they face when they wear the seat belts and sitting on the seats. In view of this, a disabled car to be developed should have ergonomic design for its seats and the safety of the seatbelt as well as trouble-free supporting equipment helping them move. Third, rather than owner-drivers with handicaps, guardians expressed more difficulties and less contentment with the cars for the disabled, which is reckoned to lead to the changes of perspectives on development of cars for the disabled breaking away from existing viewpoints focusing on the accessibility to the vehicles. Fourth, both owner-drivers and guardians showed higher interests in driving and other safety and convenience measures than in using supporting equipment to get into and out of vehicles, implying that rather than the accessibility to get into and out of a car, convenience should primarily be taken into account for the design of the disabled car. Fifth, the auto-manufacturer is to give prior thought to user convenience when developing a car in practice. For this, the developer may have the disabled car users join the process of development as well as asking experts for help and participation.