• 한국항공우주학회지
• /
• 제33권6호
• /
• pp.83-91
• /
• 2005

본 논문은 초음속 환경에서 운용되는 원통형 비행체가 비행중 경험하는 공력하중 및 공력가열 현상을 지상에서 유사하게 모사하기 위한 내열구조시험 기법 및 시험결과에 대하여 기술하였다. 시험 중 시험 구조물의 자세를 공중에서 제어하거나 시험 중지 중 시험 구조물을 지지할 목적으로 스프링을 이용하는 특별한 자세제어장치가 설계되었다. 시험 구조물에 공력하중과 열하중을 부가하기 위하여 유압식 외력하중부가 장비와 전기식 열부가 장비를 사용하였다. 특히, 복사방식의 수백 개 석영램프가 열부가장비에 응용되었으며, 이들을 이용하여 여러 가지의 열특성 시험조건이 해석조건과 유사하게 지상에서 성공적으로 구현되었다. 연구결과 본 내열구조강도시험기법은 외력 및 극심한 열하중에 노출된 원통형 구조물의 구조적 건전성을 실험적 방법에 의거 지상에서 검증하거나 설계 개선에 필요한 공학자료를 획득하는데 적합한 방법임이 입증되었다.

• 항공우주기술
• /
• 제8권2호
• /
• pp.140-148
• /
• 2009

발사체 추진시스템에서 CC(Combustion Chamber) 산화제 개폐밸브는 액체산소를 연소기로 공급 및 차단함으로써 연소를 개시 및 중단시킬 뿐만 아니라, 정상운영 상태에서는 연소기 내 안정된 연소가 가능하도록 일정한 유량의 액체산소를 공급한다. CC 산화제 개폐밸브 개발과 관련하여, TM(Technology Model)의 극저온 산화제 개폐밸브를 제작하여, 밸브의 정상적인 작동성능을 이미 확인한 바 있다. 반면 TM의 유량계수, Cv가 설계기준 값보다 상당히 작았기 때문에, 차기 개발 단계인 CC 산화제 개폐밸브 EM(Engineering Model)의 설계/제작을 통해 충분히 개선된 Cv 특성을 확보하기 위해 CFD 해석을 수행하였다. CFD 해석 결과, 밸브 출구 각도를 120o로 변경하고, 밸브의 부분적인 크기 증가와 스트록 길이를 증가시킴으로써 EM의 Cv를 상당히 향상시킬 수 있는 것으로 확인되었다. 유량시험을 통해 측정된 EM의 개선된 Cv는 최소 212로써, 기존 TM의 Cv값인 161보다 32%가량 증가된 것을 확인하였다.

• 한국가스학회지
• /
• 제16권4호
• /
• pp.1-7
• /
• 2012

지난 2010년 8월 9일 발생한 압축천연가스(compressed natural gas, CNG) 버스의 내압용기 파열사고 이후 정부는 CNG자동차의 안전관리 체계를 구축하기 위하여 다각적인 연구를 수행하였으며, 본 내용은 그 주요 내용을 정리한 것이다. CNG자동차의 안전성 향상을 위해 관련 법령, 검사 인증기준 등 안전관리제도를 검토하였고, 더불어 CNG자동차 관련 종사자(검사원, 정비원)에 대한 교육훈련 등도 검토하였다. 주요 검토내용으로는 CNG자동차용 용기형태, CNG용기의 설치위치, 압력방출배관의 재질 및 설치형태, 배관접속 및 접합방법, 가스누출 경보시스템, 긴급차단밸브 및 작동 스위치, CNG용기 보호커버, CNG 자동차 충전사업자의 공급자 의무사항, CNG자동차의 정기검사제도, CNG자동차의 일상점검 제도, CNG자동차 종사자의 교육훈련제도, CNG버스 운송사업체의 안전관리자 선임제도 등이다. 위의 주요 항목들을 중점적으로 검토하여 CNG자동차의 안전성 향상 방안을 제안하였다.

• 한국철도학회논문집
• /
• 제10권5호
• /
• pp.473-479
• /
• 2007

KTX 인수시험 시 차량 후미부에서 횡진동이 발생하여, 차륜의 답면구배를 1/40에서 1/20로 변경하여 횡진동 문제를 해결하였다. 그러나 차륜의 답면구배를 변경하면 차량의 임계속도 및 주행 안전성에 영향을 미치기 때문에 1/20 차륜에 대한 주행 안전성에 대한 검토 요구된다. 본 논문에서는 VAMPIRE를 이용하여 KTX 1편성 20량을 모델화하여 주행 안전성 및 임계속도를 계산하였으며, 계산결과의 타당성을 검토하기 위해서 KHST차량의 시험결과와 비교하였다. 해석결과 차륜답면이 0.3인 경우 임계속도는 375km/h이상이었으며, 차륜의 답면구배가 1/20인 경우 1/40보다 곡선 추정성이 우수한 것을 알았다. 또한 기존선 주행 시 차량의 속도향상 가능성을 파악하기 위해서 계산한 결과 직선구간에는 10%속도 향상이 가능하지만, 곡선구간에는 기존차량의 속도와 동일하게 운행하는 것이 유리하다는 것을 알았다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1320-1326
• /
• 2011

The maximum speed of high-speed rail is restricted to various factors such as track condition including slope and radius, tunnel and dynamic stability of vehicle. Among the various factors, traction effort and resistance to motion is principal and basic factor. In addition, at high speed over 300km/h, aerodynamic drag amounts up to 80% of resistance to motion, that it can be said that aerodynamic drag is the most important factor to decide the maximum speed of high-speed rail system. This paper deals with a measure to increase the maximum speed of high-speed train by reducing aerodynamic drag. The traction effort curve and resistance to motion curve of existing high-speed train under development has been employed to set up the target of aerodynamic drag reduction to reach up to 500km/h without modification traction system. In addition, the contribution of various sources of aerodynamic drag to total value has been analyzed and the strategy for implementation of aerodynamic drag reduction has been discussed based on the aerodynamic simulation results around the train using computational fluid dynamics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.694-698
• /
• 2006

This paper presents an optimal design process using beads on a body panel to improve interior noise of a passenger vehicle. Except modification of structural members, it is difficult to find effective countermeasures that can work for the intermediate frequency range from 100 Hz to 300 Hz which lies between the booming and low medium frequency. In this study, it is a major goal to find additional counter-measures for this intermediate frequency range by performing optimal design of beads on body panels. The proposed method for design optimization consists of 4 sub-steps, that is, a) problem definition, b) cause analysis, c) countermeasure development and d) validation. The objective function is minimization of interior noise level. The major design variables are the geometrical shape of a bead and combination of beads on the critical panels. Sensitivity analysis and optimization are performed according to the predefined process for an optimal design. It is verified that the proposed design decreases the level of noise transfer function above 5 dB.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권4호
• /
• pp.675-687
• /
• 2017

In the aerospace industry, we have produced various models according to operational conditions and the environment after development of the base model is completed. Therefore, when design change is necessary, there are modification and updating costs of the circuit whenever environment variables change. For these reasons, recently, in various fields, system designs that can flexibly respond to changing environmental conditions using field programmable gate arrays (FPGAs) are attracting attention, and the rapidly changing aerospace industry also uses FPGAs to organize the system environment. In this paper, we design the controller area network (CAN) intellectual property (IP) protocol used instead of the avionics protocol that includes ARINC-429 and MIL-STD-1553, which are not suitable for small unmanned aerial vehicle (UAV) systems at the register transistor logic (RTL) level, which does not depend on the FPGA vender, and we verify the performance. Consequentially, a Spartan 6 FPGA model-based system on chip (SoC) including an embedded system is constructed by using the designed CAN communications IP and Xilinx Microblaze, and the configured SoC only recorded an average 32% logic element usage rate in the Spartan 6 FPGA model.

• 한국철도학회논문집
• /
• 제9권2호
• /
• pp.169-173
• /
• 2006

The major objective of this study is to investigate the fatigue life evaluation of immovability crossing for railway turnout by the field test. In railway engineering, an appliance is necessary to allow a vehicle to move from one track to another. This appliance came to be known technically as turnout. So, turnout is required very complex railway technologies such as rolling stock, track. Due to the plan under the application of high speed train, turnout are needed more stable far fatigue behaviors. It analyzed the mechanical behaviors of turnout crossing with propose its advanced technical type on the field test and fatigue evaluation far the dynamic fatigue characteristics. As a result, the advanced type crossing are obviously effective for the fatigue damage ratio and dynamic response which is non-modified type. The analytical and experimental study are carried out to investigate the passing path of contact surface and fatigue damage trend decrease dynamic stresses and deflections on advanced crossing type, And the advanced type reduce dynamic fatigue damage ratio and increase fatigue life(about each 38%) more than non-modified type. From the field test results of the servicing turnout crossing, it is evaluated that the modification of contact angle, weight, material and sectional properties is very effective fur ensure against fatigue risks.

• 전력전자학회논문지
• /
• 제23권3호
• /
• pp.168-173
• /
• 2018

In this paper, an auxiliary power supply (APS) for railroad cars is proposed. The APS can reduce the number of devices required to supply power through structural modification and operates at a high switching frequency by application of a SiC device. The voltage stress on the device in the proposed circuit can be reduced to less than half of the input voltage of the system; thus, a device with low breakdown voltage can be designed. By adapting a SiC device instead of an IGBT device, the proposed circuit can reduce switching and conduction losses and operate at a high switching frequency, thereby reducing output voltage and inductor current ripples in the proposed circuit. The theoretical analysis results of the proposed APS are verified with a 40 kW computer-based simulation and a 2 kW experiment.

• 대한의생명과학회지
• /
• 제15권4호
• /
• pp.265-272
• /
• 2009

Recently, mesenchymal stem cells (MSCs) began to be utilized as a vehicle for ex vivo gene therapy based on their plasticity. Effective and safe transfection of therapeutic genes is a critical step for genetic modification of MSCs. Therefore, optimization of in vitro gene delivery into MSCs is essential to provide genetically modified stem cells. In this study, various cationic liposomes, O,O'-dimyristyl-N-lysyl aspartate (DMKD), DMKD/cholesterol, O,O'-dimyristyl-N-lysyl glutamate (DMKE), DMKE/cholesterol, and N-[1-(2,3-dioleoyloxy)]-N,N,N-trimethylammonium propane methyl sulfate (DOTAP)/cholesterol, were mixed with plasmid DNA encoding luciferase (pAAV-CMV-Luc) at varied ratios, and then used for transfection to MSCs under varied conditions. The MSCs were also transfected by electroporation under varied conditions, such as voltage, pulse length, and pulse interval. According to the experimental results, electroporation-mediated transfection was more efficient than cationic liposome-mediated transfection. The best MSC transfection was induced by electroporation 3 times pulses for 2 ms at 200 V with 10 seconds of a pulse interval.