• Journal of KSNVE
• /
• v.9 no.4
• /
• pp.703-713
• /
• 1999

A side mirror is an important safety tool with which the driver can observe objects out of sight. This paper presents an organized design technology for the side mirror of improved vibration characteristics. Resonance response to forced vibration is critical to observability through the mirror to be designed. This study aims at the reduction of vibration level by the modification of mirror structures and consequent effects are predicted by computer simulations. We used a three-dimensional solid modeling and the modal and frequency analysis ; Pro/Engineer is used as a solid modeler; Pro/Mechanica for vibration analysis. The simulation results are compared with those obtained in experiemnts to check the validity by the three-dimensional modeling. The design technique of side mirror has been established and found to be effective in vibration analysis of redesigned parts.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.3
• /
• pp.1152-1167
• /
• 2018

In this paper, I propose an application layer cooperative congestion control scheme for safety message broadcast in vehicular networks, called CMS, that adaptively controls a vehicle's safety message rate and transmit timing based on the channel congestion state. Motivated by the fact that all vehicles should transmit and receive an application layer safety message in a periodic manner, I directly exploit the message itself as a means of estimating the channel congestion state. In particular, vehicles can determine wider network conditions by appending their local channel estimation result onto safety message transmissions and sharing them with each other. In result CMS realizes cooperative congestion control without any modification of the existing MAC protocol. I present extensive NS-3 simulation results which show that CMS outperforms conventional congestion control schemes in terms of the packet collision rate and throughput, especially in a high-density traffic environment.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.4
• /
• pp.12-22
• /
• 2001

Vehicle driving simulators hale been used in the development and modification of models. A simulator can reduce cost and time through a variety of driving simulations in the laboratory. Recently, driving simulators have begun to proliferate in the automotive industry and the associated research community. This paper presents the hardware and software developed fur a driving simulator of construction vehicles. This effect involves the real-time dynamic analysis of wheel-type excavator, the design and manufacturing of the Stewart platform, an integrated control system of the platform, and three-dimensional graphic modeling of the driving environments.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.867-871
• /
• 1996

Recently many studies have been carried out to predict the characteristics of vehicle noise and to reduce the noise for enhancing the ride quality. In this study, the structural-acoustic coupling theory and the acoustic finite element theory were reviewed, and the structural acoustic coupling analysis was applied to an automobile. Because of nonuniformed lateral shape of a compartment cavity, the acoustic modes were calculated with 3-D finite element modeling. The structural modes were measured with the modal testing. Using the structural-acoustic cooling analysis, the modes which strongly coupled to the interior noise were identified and the boundary regions which could reduce noise level efficiently by structural modification were predicted.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.6
• /
• pp.66-76
• /
• 1999

Vehicle driving simulators have been used in the development and modification of models. A simulator can reduce cost and time through a variety of driving simulations in the laboratory. Recently, driving simulators have begun to proliferate in the automotive industry and the associated research community. This paper presents the hardware and software developed for a driving simulator of construction vehicles. This effor involves the real-time dynamic analysis of wheel-type excavator, the design and manufacturing of the Stewart platform, an integrated control system of the platform, and three-dimensional graphic modeling of the driving environments.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1151-1156
• /
• 2002

This paper describes the examples of Noise, Vibration and Harshness(N.V.H) development applying Computer Aided Engineering(CAE). Some Commercial Software was used to reduce the cost, development time and to predict the Noise and vibration phenomenon of new vehicle design. This paper is including measured and analysis data, and tried to prove the good correlation between measured and calculated data, so test and analysis data were compared seriously and carefully. Analysis models, which were used to predict and develop the NVH phenomenon, analysis method, and a field of --0application are explained briefly. Also, model pictures are presenting in this paper. This paper describes the analyzing method of the calculated results, design modification and development procedure, and NVH performance target setting up and procedure.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.1
• /
• pp.19-23
• /
• 2005

This study was performed to find out performance characteristics and develop LNG engine. this system was designed and manufactured by modification of a diesel using the LNgas. The engine was manufactured to be able to change the compression ratio by changing thickness of the gasket. The results are summarized brake power and torque of the engine increased when compression ratio of the engine increased. The engine output showed more power with gasoline by 5-10% then LNG under compression ratio of 9.5.and maximum brake thermal effeiency was noted when air-fuel ratio was 15.5. The concentrations of NOx, CO and HC in the exhaust gas showed lower values with the engine fueled LNG then gasoline.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.487-492
• /
• 2002

In this study, designs of protection fences such as the concrete median barrier and the guardrail were performed. The foreign standard of concrete median barrier was introduced and implemented without modification fitting to domestic vehicles and highway conditions. In a car accident, median barrier doesn't protect vehicles effectively, especially for heavy vehicles such as bus and heavy truck. Guardrail doesn't protect vehicle effectively, either. The purpose of this study is to develop the optimal performance design of concrete median barrier and design of guardrail using the design of experiment as well as crashworthiness analysis which is done by Pam-Crash. As a result of this study, an optimal design of concrete median barrier was obtained considering von Mises stress, volume and COG acceleration of truck. And design of guardrail satisfying the domestic requirements was obtained.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.998-1003
• /
• 2006

In this research, engine performance and emission characteristics of a 12,000cc heavy duty diesel engine was investigated by the application of GTL and ULSD fuels. The test was conducted at several engine speeds and loads under a single mode and a ESC mode. GTL fuel proves that it can be applicable to vehicles without engine modification.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.7
• /
• pp.672-676
• /
• 2010

In a railway vehicle, corrugated steel panel is widely used for the floor structure because of its high bending stiffness and light weight. However, this panel shows lower sound insulation performance than that of the flat plate with the same weight. Especially, in a particular frequency region, transmission loss(TL) rapidly decreases and it results in the deterioration of sound insulation performance of the overall floor structure. This study identifies that the severe decrease in TL is caused from the local resonance of the periodic corrugated structure. TL decrease by local resonance is investigated by experiment and finite element analysis. Finally, design modification of the corrugation is proposed to improve TL and the effect is verified by experiment.